# PC-card sample configuration file # Tatsumi Hosokawa # # Removing all IRQ conflicts from this file can't be done because of some # IRQ-selfish PC-cards. So if you want to use some of these cards in # your machine, you will be forced to modify their IRQ parameters from # the following list. # # $Id: pccard.conf.sample,v 1.1.1.1.2.10.2.6.2.21.2.21 1999/04/05 12:09:30 toshi Exp $ # Generally available IO ports io 0x240-0x3ff # Generally available IRQs (DEPRECATED, USE OF THE OPTION IS DISCOURAGED) #irq 10 11 # Unavailable IRQs #ignirq 9 # refrain from using SoundBlaster's IRQ, by default. ignirq 5 # it may be helful for most of notebook PCs #ignirq 15 # Available memory slots memory 0xd4000 96k #----------------------------------------------------------------------- # Were not for special reasons, please add new entries at the top of # this file when you wrote new entries for unsupported cards. # And, if you succeed using new unsupported cards, please e-mail me # the new entries. # Tatsumi Hosokawa #----------------------------------------------------------------------- # ......... for unsupported cards ......... #----------------------------------------------------------------------- # Fast Ethernet Cards #----------------------------------------------------------------------- # PLANEX (PLANET) FNW-3600-T card "Fast Ethernet" "Adapter" config 0x1 "ed0" any insert logger -s PLANEX FNW-3600-T inserted insert /etc/pccard_ether $device remove logger -s PLANEX FNW-3600-T removed remove /etc/pccard_ether_remove $device # Laneed LD-10/100CD card "Laneed" "LD-10/100CD" config default "ed0" any insert logger -s Laneed LD-10/100CD inserted insert /etc/pccard_ether $device remove logger -s Laneed LD-10/100CD removed remove /etc/pccard_ether_remove $device # Linksys EtherFast 10/100 PC Card (NE2000 Compatible) card "Linksys" "EtherFast 10/100 PC Card \(PCMPC100\)" config default "ed0" any insert logger -s Linksys EtherFast 10/100 inserted insert /etc/pccard_ether $device remove logger -s Linksys EtherFast 10/100 removed remove /etc/pccard_ether_remove $device # Logitec LPM-LN100TX 100BASE-TX Ethernet LAN CARD card "Logitec" "LPM-LN100TX" config default "ed0" any insert logger -s Logitec LPM-LN100TX Ethernet inserted insert /etc/pccard_ether $device remove logger -s Logitec LPM-LN100TX Ethernet removed remove /etc/pccard_ether_remove $device # BayNetworks NETGEAR FA410TXC Fast Ethernet card "NETGEAR" "FA410TX" "Fast Ethernet" config default "ed0" any insert logger -s NETGEAR FA410TX inserted insert /etc/pccard_ether $device remove logger -s NETGEAR FA410TX removed remove /etc/pccard_ether_remove $device # Telecom Device SuperSocket RE550T card "Telecom Device K\.K\." "SuperSocket RE550T" config default "ed0" any insert logger -s Telecom Device SuperSocket RE550T inserted insert /etc/pccard_ether $device remove logger -s Telecom Device SuperSocket RE550T removed remove /etc/pccard_ether_remove $device # ONTEC LN-2221 10/100 Ethernet Adapter card "ONTEC & SMC" "LN-2221 Ethernet PCCard" config default "sn0" any insert logger -s ONTEC LN-2221 Ethernet inserted insert /etc/pccard_ether $device remove logger -s ONTEC LN-2221 Ethernet removed remove /etc/pccard_ether_remove $device # COREGA FastEther PCC-TX card "corega K.K." "corega FastEther PCC-TX" config default "ed0" any insert logger -s Corega FastEther PCC-TX inserted insert /etc/pccard_ether $device remove logger -s Corega FastEther PCC-TX removed remove /etc/pccard_ether_remove $device # I/O DATA PCET/TX card "IO DATA" "PCETTX" config default "ed0" any insert logger -s IO-DATA PCET/TX inserted insert /etc/pccard_ether $device remove logger -s IO-DATA PCET/TX removed remove /etc/pccard_ether_remove $device # CyQ've ELA-110 card "CyQ've" "ELA-110 10/100M LAN Card" config default "ed0" any insert logger -s "CyQ've ELA-100 10/100M LAN card inserted" insert /etc/pccard_ether $device remove logger -s "CyQ've ELA-100 10/100M LAN card removed" remove /etc/pccard_ether_remove $device # D-Link DFE-650 Ethernet Card card "D-Link" "DFE-650" config default "ed0" any 0x10 insert logger -s D-link DFE-650 inserted insert /etc/pccard_ether $device remove logger -s D-link DFE-650 removed remove /etc/pccard_ether_remove $device # MELCO LPC-TX card "MELCO/SMC" "LPC-TX" config default "sn0" any ether 0x4a 00:a0:dc insert logger -s MELCO/SMC LPC-TX inserted insert /etc/pccard_ether $device remove logger -s MELCO/SMC LPC-TX removed remove /etc/pccard_ether_remove $device #----------------------------------------------------------------------- # Ethernet Cards #----------------------------------------------------------------------- #IBM PCMCIA Ethernet I/II, RIOS PC CARD II ETHERNET card "IBM Corp\." "Ethernet" config default "ed0" any ether 0xff0 # 08:00:5a 00:04:ac 00:06:29 insert logger -s IBM PCMCIA Ethernet inserted insert /etc/pccard_ether $device remove logger -s IBM PCMCIA Ethernet removed remove /etc/pccard_ether_remove $device # Planet Smart COM 2000, Melco LPC-T card "PCMCIA" "UE2212" config default "ed0" any 0x10 ether 0xff0 00:00:e8 insert logger -s Planet Smart COM 2000 inserted insert /etc/pccard_ether $device remove logger -s Planet Smart COM 2000 removed remove /etc/pccard_ether_remove $device # Accton EN2212 card "ACCTON" "EN2212" config default "ed0" any 0x30 ether 0xff0 00:00:e8 insert logger -s Accton EN2212 inserted insert /etc/pccard_ether $device remove logger -s Accton EN2212 removed remove /etc/pccard_ether_remove $device # Planet Communications Ethernet Card ENW-3501-T card "IC-CARD+" "IC-CARD+" config default "ed0" any 0x10 insert logger -s Planet ENW-3501-T inserted insert /etc/pccard_ether $device remove logger -s Planet ENW-3501-T removed remove /etc/pccard_ether_remove $device # Planet Smart COM 3500, IC-Card Ethernet, SYSCOM SC100 Ethernet Card card "IC-CARD" "IC-CARD" config default "ed0" any 0x20 # config default "ed0" any 0x10 insert logger -s Planet Smart Com 3500 inserted insert /etc/pccard_ether $device remove logger -s Planet Smart Com 3500 removed remove /etc/pccard_ether_remove $device # 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D card "3Com Corporation" "3C589" config default "ep0" any insert logger -s 3Com Etherlink III inserted insert /etc/pccard_ether $device remove logger -s 3Com Etherlink III removed remove /etc/pccard_ether_remove $device # 3Com Megahertz 3CXE589ET card "3Com" "Megahertz 589E" config default "ep0" any insert logger -s 3Com Megahertz 3C589E inserted insert /etc/pccard_ether $device remove logger -s 3Com Megahertz 3C589E removed remove /etc/pccard_ether_remove $device # Farallon EtherMac card "Farallon" "ENet" config default "ep0" any insert logger -s Farallon EtherMac inserted insert /etc/pccard_ether $device remove logger -s Farallon EtherMac removed remove /etc/pccard_ether_remove $device # Fujitsu FMV-J181 card "PCMCIA MBH10302" "01" config 0xc "fe0" any insert logger -s Fujitsu FMV-J181 inserted insert /etc/pccard_ether $device remove logger -s Fujitsu FMV-J181 removed remove /etc/pccard_ether_remove $device # NextCom J Link NC5310 card "NextComK\.K\." "NC5310 Ver1\.0.*" config 0x14 "fe0" any # config 0x1a "fe0" any insert logger -s NextCom J Link NC5310 inserted insert /etc/pccard_ether $device remove logger -s NextCom J Link NC5310 removed remove /etc/pccard_ether_remove $device # HITACHI HT-4840-11 card "HITACHI" "HT-4840-11" config 0x1a "fe0" any insert logger -s HITACHI HT-4840-11 inserted insert /etc/pccard_ether $device remove logger -s HITACHI HT-4840-11 removed remove /etc/pccard_ether_remove $device # CONTEC C-NET(PC)C Ethernet card "CONTEC Co\.,Ltd\." "C-NET\(PC\)C.*" config default "fe0" any ether 0x58 00:80:4c insert logger -s CONTEC C-NET inserted insert /etc/pccard_ether $device remove logger -s CONTEC C-NET removed remove /etc/pccard_ether_remove $device # TDK LAC-CD021, LAC-CD021A card "TDK" "LAC-CD02x" config default "fe0" any # These cards have same ID strings, and different MAC address # locations. ether 0x92 00:80:98 # LAC-CD021, LAC-021A ether 0x96 00:80:98 # LAC-CD021BX insert logger -s TDK LAC-CD021 inserted insert /etc/pccard_ether $device remove logger -s TDK LAC-CD021 removed remove /etc/pccard_ether_remove $device # Fujitsu FMV-J182, FMV-J182A card "FUJITSU" "LAN Card\(FMV-J182\)" config 0x32 "fe0" any # These cards have same ID strings, and different MAC address # locations. ether 0xf2c 00:00:0e #FMV-J182 ether 0x1cc 00:00:0e #FMV-J182A insert logger -s Fujitsu FMV-J182 inserted insert /etc/pccard_ether $device remove logger -s Fujitsu FMV-J182 removed remove /etc/pccard_ether_remove $device # Megahertz X-Jack Ethernet CC10BT/2 card "Megahertz" "CC10BT/2" config default "sn0" any ether attr2hex 00:00:86 insert logger -s Megahertz X-Jack Ethernet inserted insert /etc/pccard_ether $device remove logger -s Megahertz X-Jack Ethernet removed remove /etc/pccard_ether_remove $device # Megahertz Ethernet Adapter card "Megahertz" "ETHERNET ADAPTOR" config default "sn0" any ether attr2hex 00:00:86 insert logger -s Megahertz Ethernet inserted insert /etc/pccard_ether $device remove logger -s Megahertz Ethernet removed remove /etc/pccard_ether_remove $device # Dayna Communications CommuniCard E card "Dayna Communications, Inc\." "CommuniCard E" config default "ed0" any 0x10 ether 0x110 00:80:19 insert logger -s Dayna CommuniCard inserted insert /etc/pccard_ether $device remove logger -s Dayna CommuniCard remove remove /etc/pccard_ether_remove $device # GVC NIC-2000P Ethernet Card card "GVC" "NIC-2000p" config default "ed0" any 0x10 insert logger -s GVC NIC-200P inserted insert /etc/pccard_ether $device remove logger -s GVC NIC-200P removed remove /etc/pccard_ether_remove $device # No-brand NE-2000 compatible card card "PCMCIA" "ETHERNET V1.0" config default "ed0" any 0x10 ether 0xff0 # MAC address field should be filled insert logger -s PCMCIA ETHERNET V1.0 inserted insert /etc/pccard_ether $device remove logger -s PCMCIA ETHERNET V1.0 removed remove /etc/pccard_ether_remove $device # Eiger Labs Ethernet COMBO card "EIGER Labs Inc\." "Ethernet COMBO Card" config default "ed0" any 0x10 insert logger -s Eiger Labs Ethernet COMBO inserted insert /etc/pccard_ether $device remove logger -s Eiger Labs Ethernet COMBO inserted remove /etc/pccard_ether_remove $device # D-Link DE-650 Ethernet Card card "D-Link" "DE-650" config default "ed0" any 0x10 # New models of DE650 has no ether MAC address definition in CIS tupples. # If you have an older one, please uncomment the following line. # ether 0x40 00:80:c8 insert logger -s D-link DE-650 inserted insert /etc/pccard_ether $device remove logger -s D-link DE-650 removed remove /etc/pccard_ether_remove $device # National Semiconductor InfoMover 4100 card "National Semiconductor" "InfoMover 4100" config default "ed0" any ether 0xff0 08:00:17 insert logger -s National Semiconductor InfoMover inserted insert /etc/pccard_ether $device remove logger -s National Semiconductor InfoMover removed remove /etc/pccard_ether_remove $device # Accton EN2216 EtherCard card "ACCTON" "EN2216-PCMCIA-ETHERNET" config 0x22 "ed0" any 0x10 ether 0x1c0 00:00:e8 insert /etc/pccard_ether $device insert logger -s Accton EN2216 inserted remove /etc/pccard_ether_remove $device remove logger -s Accton EN2216 removed # Accton UE2216 Ethernet OEM card "PCMCIA" "PCMCIA-ETHERNET-CARD" config 0x22 "ed0" any 0x10 ether 0x1c0 00:00:e8 insert logger -s Accton UE2216 Ethernet inserted insert /etc/pccard_ether $device remove logger -s Accton UE2216 Ethernet removed remove /etc/pccard_ether_remove $device # NDC Instant-Link card "NDC" "Ethernet" config default "ed0" any 0x30 insert logger -s NDC Instant-Link inserted insert /etc/pccard_ether $device remove logger -s NDC Instant-Link removed remove /etc/pccard_ether_remove $device # Laneed PCMCIA Ethernet card. ELECOM LD-CDWA (DP83902A) card "MACNICA" "ME1-JEIDA" config default "ed0" any ether 0xb8 08:00:42 insert logger -s MACNICA PCMCIA Ethernet inserted insert /etc/pccard_ether $device remove logger -s MACNICA PCMCIA Ethernet removed remove /etc/pccard_ether_remove $device # Digital DEPCM-BA Ethernet card "DIGITAL" "DEPCM-XX" config default "ed0" any 0x10 insert logger -s Digital DEPCM-BA Ethernet inserted insert /etc/pccard_ether $device remove logger -s Digital DEPCM-BA Ethernet removed remove /etc/pccard_ether_remove $device # Matsushita Electric Industrial Co.,LTD. CF-VEL211P-B card "Matsushita Electric Industrial Co.,LTD." "CF-VEL211" config default "ed0" any ether 0xff0 00:80:45 insert logger -s Panasonic CF-VEL211 inserted insert /etc/pccard_ether $device remove logger -s Panasonic CF-VEL211 removed remove /etc/pccard_ether_remove $device # ADDTRON EP-210A card "EP-210 PCMCIA LAN CARD\." ".*" config default "ed0" any 0x10 ether 0x110 00:40:33 insert logger -s ADDTRON EP-210A inserted insert /etc/pccard_ether $device remove logger -s ADDTRON EP-210A removed remove /etc/pccard_ether_remove $device # PreMax PE-200 Ethernet Card card "PMX " "PE-200" config default "ed0" any 0x10 ether 0x7f0 00:20:e0 insert logger -s PREMAX PE-200 inserted insert /etc/pccard_ether $device remove logger -s PREMAX PE-200 removed remove /etc/pccard_ether_remove $device # No-brand NE2000 compatible card (FCC ID: LXLC1LANTB) card " " "Ethernet Combo card" config default "ed0" any 0x10 insert logger -s NE2000 compatible card inserted insert /etc/pccard_ether $device remove logger -s NE2000 compatible card removed remove /etc/pccard_ether_remove $device # RATOC REX-5588 (now testing...) card "PCMCIA LAN MBH10304 ES" " 01" # Kouji Yamamoto reported that # following entry worked with his REX-5588, but the card I borrowed # has no such config index on CIS tupple. Minor version problem? # # config 0x3a "fe0" 5 # ether 0x328 00:c0:d0 # # I tried to drive it by following entry on my DHU II, but it does # not work! # # config 0x1f "fe0" any config 0x3a "fe0" any # config 0x38 "fe0" any ether 0x32c 00:c0:d0 # many minor revs.... ether 0x328 00:c0:d0 ether 0x200 00:c0:d0 insert logger -s RATOC REX-5588 Ethernet inserted insert /etc/pccard_ether $device remove logger -s RATOC REX-5588 Ethernet removed remove /etc/pccard_ether_remove $device # SCM Ethernet Combo (*Not SMC :-)*) card "SCM" "Ethernet Combo card" config default "ed0" any 0x10 ether 0xff0 00:20:cb insert logger -s SCM Ethernet card inserted insert /etc/pccard_ether $device remove logger -s SCM Ethernet card removed remove /etc/pccard_ether_remove $device # Linksys Combo PCMCIA Ethernet Card card "LINKSYS" "E-CARD" config default "ed0" any 0x10 insert logger -s Linksys Combo Ethernet inserted insert /etc/pccard_ether $device remove logger -s Linksys Combo Ethernet removed remove /etc/pccard_ether_remove $device # Linksys Combo PCMCIA Ethernet Card card "Linksys" "Combo PCMCIA EthernetCard \(EC2T\)" config default "ed0" any 0x10 insert logger -s Linksys PCMCIA Ethernet inserted insert /etc/pccard_ether $device remove logger -s Linksys PCMCIA Ethernet removed remove /etc/pccard_ether_remove $device # I/O DATA PCLA/T card "I-O DATA" "PCLA" config default "ed0" any 0x10 ether 0x1c0 00:a0:b0 ether 0xff0 00:a0:b0 insert logger -s I-O DATA PCLA/T Ethernet inserted insert /etc/pccard_ether $device remove logger -s I-O DATA PCLA/T Ethernet removed remove /etc/pccard_ether_remove $device # I/O DATA PCLA/TE card "IO DATA" "PCLATE" config default "ed0" any 0x10 insert logger -s I-O DATA PCLA/TE Ethernet inserted insert /etc/pccard_ether $device remove logger -s I-O DATA PCLA/TE Ethernet removed remove /etc/pccard_ether_remove $device # Fujitsu Towa LA501 Ethernet card "FUJITSU TOWA" "LA501" config 0x29 "fe1" any 0x10 ether 0x332 00:00:0e insert logger -s Fujitsu Towa LA501 Ethernet inserted insert /etc/pccard_ether $device remove logger -s Fujitsu Towa LA501 Ethernet removed remove /etc/pccard_ether_remove $device # Grey Cell GCS2220 Ethernet Card card "Grey Cell" "GCS2220" config default "ed0" any 0x10 insert logger -s Grey Cell GCS2220 inserted insert /etc/pccard_ether $device remove logger -s Grey Cell GCS2220 removed remove /etc/pccard_ether_remove $device # Epson EEN10B Ethernet Card card "Seiko Epson Corp\." "Ethernet" config default "ed0" any 0x10 ether 0xff0 00:00:48 insert logger -s Epson EEN10B Ethernet Card inserted insert /etc/pccard_ether $device remove logger -s Epson EEN10B Ethernet Card removed remove /etc/pccard_ether_remove $device # COREGA Ethernet Card card "Corega,K\.K\." "\(Ethernet LAN Card\)" config default "ed0" any ether 0xff0 00:00:f4 insert logger -s Corega Ethernet inserted insert /etc/pccard_ether $device remove logger -s Corega Ethernet removed remove /etc/pccard_ether_remove $device # COREGA Ether PCC-T card "corega K.K." "corega Ether PCC-T" config default "ed0" any insert logger -s Corega Ether PCC-T inserted insert /etc/pccard_ether $device remove logger -s Corega Ether PCC-T removed remove /etc/pccard_ether_remove $device # Telecom Device SuperSocket RE450T card "Ethernet" "Adapter" config 0x3 "ed0" any # There's another minor revision of this card that has no MAC address in # CIS tupple. This revision does not require "ether" definition. If you # have it, please comment out the following line. ether 0x110 00:e0:98 # Please note that if the log message says that the MAC address of the # card is 00:00:00:00:00:00, please uncomment the "ether" definition again # and set it to proper value. insert logger -s Telecom Device SuperSocket RE450T inserted insert /etc/pccard_ether $device remove logger -s Telecom Device SuperSocket RE450T removed remove /etc/pccard_ether_remove $device # Telecom Device SuperSocket RE450T card "Telecom Device K.K." "SuperSocket RE450T" config default "ed0" any insert logger -s Telecom Device SuperSocket RE450T inserted insert /etc/pccard_ether $device remove logger -s Telecom Device SuperSocket RE450T removed remove /etc/pccard_ether_remove $device # RPTI EP401 Ethernet NE2000 compatible card "RPTI" "EP401 Ethernet NE2000 Compatible" config default "ed0" any insert logger -s RPTI EP401 Ethernet inserted insert /etc/pccard_ether $device remove logger -s RPTI EP401 Ethernet removed remove /etc/pccard_ether_remove $device # Nihon Unisys, Ltd. JPF0400-LAN card "Nihon Unisys, Ltd." "JPF0400-LAN" config default "ed0" any ether 0xff0 00:80:45 insert logger -s Nihon Unisys JPF0400-LAN inserted insert /etc/pccard_ether $device remove logger -s Nihon Unisys JPF0400-LAN removed remove /etc/pccard_ether_remove $device # Nihon Unisys, Ltd. JPF0400-ETH card "Nihon Unisys, Ltd." "JPF0400-ETH" config default "ed0" any ether 0xff0 00:80:45 insert logger -s Nihon Unisys JPF0400-ETH inserted insert /etc/pccard_ether $device remove logger -s Nihon Unisys JPF0400-ETH removed remove /etc/pccard_ether_remove $device # SURECOM EtherPerfect EP-427 Adapter card "TAMARACK" "Ethernet" config default "ed0" any ether attr2hex 00:47:43 insert logger -s SURECOM EtherPerfect EP-427 inserted insert /etc/pccard_ether $device remove logger -s SURECOM EtherPerfect EP-427 removed remove /etc/pccard_ether_remove $device # RATOC REX-R280 card "RATOC System Inc\." "10BASE_T CARD R280" config 0x3a "fe0" any ether 0x1fc 00:c0:d0 insert logger -s RATOC REX-R280 inserted insert /etc/pccard_ether $device remove logger -s RATOC REX-R280 removed remove /etc/pccard_ether_remove $device # D-Link DE-660 Ethernet Card card "D-Link" "DE-660" config default "ed0" any 0x10 insert logger -s D-link DE-660 inserted insert /etc/pccard_ether $device remove logger -s D-link DE-660 removed remove /etc/pccard_ether_remove $device # Allied Telesis Ethernet Card card "Allied Telesis,K\.K" "Ethernet LAN Card" config default "ed0" any 0x10 ether 0xff0 00:00:f4 insert logger -s Allied Telesis Ethernet Card inserted insert /etc/pccard_ether $device remove logger -s Allied Telesis Ethernet Card removed remove /etc/pccard_ether_remove $device # Toshiba Joho System PTJ-LAN/T card "TJ" "Ethernet" config default "ed0" any 0x10 insert logger -s TJ Ethernet card inserted insert /etc/pccard_ether $device remove logger -s TJ Ethernet card removed remove /etc/pccard_ether_remove $device # NextCom Next Hawk Etherneet Adapter card "NextCom K.K." "Next Hawk" config default "ed0" any insert logger -s NextCom Next Hawk Ethernet inserted insert /etc/pccard_ether $device remove logger -s NextCom Next Hawk Ethernet removed remove /etc/pccard_ether_remove $device # Logitec LPM-LN20T card "Logitec" "LPM-LN20T" config default "ed0" any insert logger -s Logitec LPM-LN20T inserted insert /etc/pccard_ether $device insert logger -s Logitec LPM-LN20T removed remove /etc/pccard_ether_remove $device # CentreCOM LA-PCM V2 card "Allied Telesis, K\.K\." "CentreCOM LA-PCM_V2" config 0x20 "ed0" any 0x10 insert logger -s CentreCOM LA-PCM V2 inserted insert /etc/pccard_ether $device remove logger -s CentreCOM LA-PCM V2 removed remove /etc/pccard_ether_remove $device # Map Japan MPL-972 card "2408LAN" "Ethernet" config default "ed0" any insert logger -s Map Japan MPL-972 inserted insert /etc/pccard_ether $device remove logger -s Map Japan MPL-972 removed remove /etc/pccard_ether_remove $device # EXPsys PCMCIA Ethernet Combo, Relia PCMCIA Ethernet card "PCMCIA LAN" "Ethernet" config default "ed0" any insert logger -s EXPsys Ethernet inserted insert /etc/pccard_ether $device remove logger -s EXPsys Ethernet removed remove /etc/pccard_ether_remove $device # CyQ've ELA-010 10BASE-T LAN Card card "CyQ've" "ELA-010" config default "ed0" any 0x10 insert logger -s CyQ\'ve ELA-010 LAN card inserted insert /etc/pccard_ether $device remove logger -s CyQ\'ve ELA-010 LAN card removed remove /etc/pccard_ether_remove $device # Billionton LNT-10TB card "Billionton" "LNT-10TB" config 0x20 "ed0" any insert logger -s Billionton LNT-10TB inserted. insert /etc/pccard_ether $device remove logger -s Billionton LNT-10TB removed. remove /etc/pccard_ether_remove $device # MELCO LPC2-T card "MELCO" "LPC2-T" config default "ed0" any insert logger -s MELCO LPC2-T inserted insert /etc/pccard_ether $device remove logger -s MELCO LPC2-T removed remove /etc/pccard_ether_remove $device # CNet PCMCIA PowerNIC CN40BC(BT) card "CNet" "CN40BC Ethernet" config default "ed0" any 0x10 insert logger -s CNet CN40BC inserted insert /etc/pccard_ether $device remove logger -s CNet CN40BC removed remove /etc/pccard_ether_remove $device # Kingston KNE-PCM/x Ethernet card "Kingston Technology Corp\." "EtheRx PC Card Ethernet.*" config default "ed0" any ether 0xff0 00:c0:f0 insert logger -s Kingston KNE-PCM/x Ethernet inserted insert /etc/pccard_ether $device remove logger -s Kingston KNE-PCM/x Ethernet removed remove /etc/pccard_ether_remove $device # NEC PC-9801N-J12 card "NEC" "PC-9801N-J12" config default "ed0" any ether 0xff0 00:00:4c insert logger -s NEC PC-9801N-J12 inserted insert /etc/pccard_ether $device remove logger -s NEC PC-9801N-J12 removed remove /etc/pccard_ether_remove $device # ELECOM Laneed LD-CDF card "Laneed" "LD-CDF" config default "ed0" any insert logger -s Laneed LD-CDF inserted insert /etc/pccard_ether $device remove logger -s Laneed LD-CDF removed remove /etc/pccard_ether_remove $device #----------------------------------------------------------------------- # Modem Cards #----------------------------------------------------------------------- # Most of modem cards does not match these definitions. Please read # "wildcard entries" listed at the end of this file. #----------------------------------------------------------------------- # Omron MD24XCA FAX/Data Modem card "OMRON Corp\." "MD24XCA" config auto "sio3" pio reset 10000 insert logger -s OMRON MD24XCA Modem inserted remove logger -s OMRON MD24XCA Modem removed #----------------------------------------------------------------------- # ISDN Serial Cards #----------------------------------------------------------------------- # NTT-IT ThunderCard card "NTT Intelligent Technology Co., Ltd." "ThunderCard DD128" config auto "sio3" any 0x80 reset 1000 insert logger -s NTT-IT Thunder-card inserted remove logger -s NTT-IT Thunder-card removed #----------------------------------------------------------------------- # Digital Cellular Cards #----------------------------------------------------------------------- # NTT DoCoMo DATA/FAX Adapter card "NTT DoCoMo" "PCMCIA DATA/FAX.*" config auto "sio3" any 0x82 insert logger -s NTT DoCoMo DATA/FAX Adapter inserted remove logger -s NTT DoCoMo DATA/FAX Adapter removed # NTT DoCoMo Mobile D Card 96P1 card "NTT DoCoMo" "Mobile D Card 96P1" config auto "sio3" any 0x82 insert logger -s NTT DoCoMo Mobile D Card 96P1 Adapter inserted remove logger -s NTT DoCoMo Mobile D Card 96P1 Adapter removed #----------------------------------------------------------------------- # PHS Digital Communication Cards #----------------------------------------------------------------------- # NTT Personal Paldio Data/Fax Card DC-1S card "NTT Personal" "Paldio Data/Fax Card" "DC-1S" config auto "sio3" any 0x40000 insert logger -s NTT Personal Paldio Data/Fax Card DC-1S inserted remove logger -s NTT Personal Paldio Data/Fax Card DC-1S removed # NTT DoCoMo (formerly NTT Personal) Paldio 321S card "NTT Personal" "32K Paldio 321S PC CARD" config auto "sio3" any 0x40000 insert logger -s NTT Personal Paldio 321S PC Card inserted remove logger -s NTT Personal Paldio 321S PC Card removed #----------------------------------------------------------------------- # Misc. Serial Cards #----------------------------------------------------------------------- # Panasonic FM-RADIO card card "Panasonic" "CF-JVR101" config auto "sio3" pio insert logger -s Panasonic FM radio card inserted remove logger -s Panasonic FM radio card removed #----------------------------------------------------------------------- # SCSI Cards #----------------------------------------------------------------------- # Adaptec SlimSCSI card "Adaptec, Inc\." "APA-1460.*" config default "aic0" any insert logger -s Adaptec Slim SCSI inserted remove logger -s Adaptec Slim SCSI removed # New Media Corporation BASICS SCSI # (Do not put this entry under Bustoaster) card "BASICS by New Media Corporation" "SCSI Sym53C500" config 0x14 "ncv0" any insert logger -s New Media BASICS SCSI inserted remove logger -s New Media BASICS SCSI removed # NewMedia Bustoaster SCSI card "New Media" "SCSI" config 0x22 "aic0" any insert logger -s New Media Bus Toaster inserted remove logger -s New Media Bus Toaster removed # RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI # (Don't put this entry under REX5535 series!) # There's a buggy revision of this card which has broken CIS tupples. # if you can't use this card, please use the point enabler. (for example, # type "pccardc enabler 0 stg0 -a 0x4140 -i 5" from root command prompt) card "PCMCIA SCSI MBH10404" "01" config 0x37 "stg0" any insert logger -s RATOC REX-5536AM SCSI inserted remove logger -s RATOC REX-5536AM SCSI removed # RATOC REX-5535AC, REX-5535X, REX-9835X, REX-9835Z SCSI card "PCMCIA SCSI MBH1040" "01" config 0x3a "spc0" any insert logger -s RATOC REX-5535 SCSI inserted remove logger -s RATOC REX-5535 SCSI removed # RATOC REX-5536M card "PCMCIA SCSI2 CARD" "01" config 0x5 "stg0" any 0 insert logger -s RATOC REX-5536M SCSI inserted remove logger -s RATOC REX-5536M SCSI removed # RATOC REX-5536, Melco IFC-SC card "1195 RATOC System Inc\." "REX5536 SCSI2 CARD" config 0x7 "stg0" any 0 insert logger -s RATOC REX-5536 SCSI inserted remove logger -s RATOC REX-5536 SCSI removed # RATOC REX-9530 card "RATOC System Inc." "SCSI2 CARD.*" config default "ncv0" any 0x84d00000 insert logger -s RATOC REX-9530 SCSI inserted remove logger -s RATOC REX-9530 SCSI removed # IO DATA PCSC-DV # Macnica Miracle SCSI mPS100 card "MACNICA" "MIRACLE SCSI" "mPS100" "D.0" config 0x11 "ncv0" any 0xb6250000 insert logger -s MACNICA Miracle SCSI inserted remove logger -s MACNICA Miracle SCSI removed # Macnica Miracle SCSI-II mPS110 card "MACNICA" "MIRACLE SCSI-II mPS110" config 0x15 "ncv0" any 0 insert logger -s MACNICA Miracle SCSI-II inserted remove logger -s MACNICA Miracle SCSI-II removed # IBM SCSI PCMCIA Card card "IBM Corp\." "SCSI PCMCIA Card" config default "stg0" any insert logger -s IBM SCSI PCMCIA Card inserted remove logger -s IBM SCSI PCMCIA Card removed # Future Domain SCSI2GO card "Future Domain Corporation" "SCSI PCMCIA Credit Card Controller" config default "stg0" any insert logger -s Future Domain SCSI2GO inserted remove logger -s Future Domain SCSI2GO removed # KME (TAXAN ICD-400PN, etc.) card "KME" "KXLC002" config 0x26 "ncv0" any 0xb4d00000 insert logger -s KME SCSI PCMCIA Card inserted remove logger -s KME SCSI PCMCIA Card removed # Qlogic Fast SCSI card "QLOGIC CORPORATION" "pc05" config 0x2f "ncv0" any 0x84d00000 insert logger -s Qlogic Fast SCSI inserted remove logger -s Qlogic Fast SCSI removed # Media Intelligent SCSI-2 PC Card MSC-200 card "EPSON" "SCSI-2 PC Card SC200" config 0x12 "ncv0" any insert logger -s EPSON SCSI-2 PC Card MSC200 inserted remove logger -s EPSON SCSI-2 PC Card MSC200 removed # NEC PC-9801N-J03R card "NEC" "PC-9801N-J03R" config 0x15 "ncv0" any 0 insert logger -s NEC PC-9801N-J03R inserted remove logger -s NEC PC-9801N-J03R removed # NEC PC-9801N-J03 # (Don't put this entry previous to NEC PC-9801N-J03R) card "NEC" "PC-9801N-J03" config 0x15 "ncv0" any 0xb6000000 # (port 0x330 is used for MPU401 on Toshiba Libretto60) # config 0x11 "ncv0" any 0xb6000000 insert logger -s PC-9801N-J03 inserted remove logger -s PC-9801N-J03 removed # WORKBIT Ninja SCSI series card "WBT" "NinjaSCSI-3" config default "nin0" any insert logger -s Workbit NinjaSCSI-3 inserted remove logger -s Workbit NinjaSCSI-3 removed # Fujitsu Towa Electron SC501 SCSI (RATOC REX-5535 OEM) card "FUJITSU TOWA" "SC501" config 0x3a "spc0" any insert logger -s Fujitsu Towa SC501 SCSI inserted remove logger -s Fujitsu Towa SC501 SCSI removed #------------------------ untested ---------------------------- #------------------------ untested ---------------------------- # If these entry do not work, try other config index than default. # Please e-mail me whether it works or not. Thanks # Tatsumi Hosokawa card "MIDORI ELECTRONICS.*" "CN-SC43.*" config default "ncv0" any 0x80100000 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp card "EIger Labs" "PCMCIA-to-SCSI Adapter" config default "ncv0" any insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp card "SCSI PCMCIA Adapter Card" ".*" config 0x20 "stg0" any insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp card " SIMPLE TECHNOLOGY Corporation" "SCSI PCMCIA Credit Card Controller" config default "stg0" any insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp card "KME" "KXLC003" config 0x26 "ncv0" any 0xb4d00000 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp #----------------------------------------------------------------------- # ATAPI CD-ROM Cards #----------------------------------------------------------------------- # IO Data CBIDE (bundled with CDP-FX24, etc.) card "WIT" "IDE16" config default "wdc1" any insert logger -s IO Data CBIDE inserted remove logger -s IO Data CBIDE removed # DHU Mobile Media CD-ROM # (no hotplug support) card "Digital Equipment Corporation\." "Digital Mobile Media CD-ROM" config 0xb "wdc1" 15 # Caravelle PSC-IDE 6x ATAPI CD-ROM card "Caravelle" "PSC-IDE " config 0x2a "wdc1" any 0x1 insert logger -s Caravelle PSC-IDE card inserted remove logger -s Caravelle PSC-IDE card removed # IBM Portable 4X Speed CD-ROM Drive CD-400 card "IBM" "PCMCIA CD-ROM Drive CD-400" config 0x1 "wdc1" any 0x1000 cardio 0x250 0x20 insert logger -s IBM PCMCIA CD-ROM CD-400 inserted remove logger -s IBM PCMCIA CD-ROM CD-400 removed # IO Data PCIDEII (bundled with CDP-TX10, etc.) card "IO DATA" "PCIDEII" config default "wdc1" any insert logger -s IO Data PCIDEII inserted remove logger -s IO Data PCIDEII removed # IBM CD-20XSeries(IDE PC Card) card "IBM" "PCMCIA Portable CD-ROM Drive" config 0x1 "wdc1" any 0x1000 cardio 0x250 0x20 insert logger -s IBM CD-20XS inserted remove logger -s IBM CD-20XS removed # NOVAC Station Series card "PCMCIA" "CD-ROM" config default "wdc1" any insert logger -s Novac Station CD-ROM inserted remove logger -s Novac Station CD-ROM removed #----------------------------------------------------------------------- # Flash ATA Cards #----------------------------------------------------------------------- # SunDisk Flash ATA card "SunDisk" ".*" config 0x03 "wdc1" any insert logger -s SunDisk Flash ATA inserted remove logger -s SunDisk Flash ATA removed # Midori Elec. Flash ATA card "Midori Elec\." ".*FLASH.*" config 0x03 "wdc1" any insert logger -s Midori Flash ATA inserted remove logger -s Midori Flash ATA removed #----------------------------------------------------------------------- # ATA HDD Cards #----------------------------------------------------------------------- card "Maxtor" "MXL.*" config 0x03 "wdc1" any insert logger -s Maxtor ATA HDD inserted remove logger -s Maxtor ATA HDD removed #----------------------------------------------------------------------- # ATA External HDD Adapters #----------------------------------------------------------------------- # Greystone Diskdock card "GREYSTONE PERIPHERAL DISKDOCK" ".*" config default "wdc1" any insert logger -s Greystone Diskdock inserted remove logger -s Greystone Diskdock removed # card "INTEGRAL PERIPHERALS" "ATA CARD" config default "wdc1" any insert logger -s Integral Peripherals inserted remove logger -s Integral Peripherals removed # DATAFAB PCMMD2 card "DATAFAB" "PCMCIA-TO-IDE" config 0x1 "wdc1" any insert logger -s DATAFAB PCMMD2 inserted remove logger -s DATAFAB PCMMD2 removed # PCM250AM 2.5in HDD adapter card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter" config 0xd "wdc1" any insert logger -s PCM250AM inserted remove logger -s PCM250AM removed # Sicon Peripheral PCMCIA ATA/ATAPI Adapter card "Sicon Peripheral" "PCMCIA ATA/ATAPI Adapter" config default "wdc1" any insert logger -s Sicon Peripherals inserted remove logger -s Sicon Peripherals removed # Microtech XpressDock card "Microtech International Inc\." "IDE PCCARD" config default "wdc1" any 0x2000 cardio 0x170 0x10 insert logger -s Microtech XpressDock inserted remove logger -s Microtech XpressDock removed #----------------------------------------------------------------------- # ATAPI LS120 Super Floppy Disk #----------------------------------------------------------------------- # LK-RM120 card "Panasonic" "LMEK0406" config 0x22 "wdc1" any 0x1 insert logger -s Panasonic LMEK0406 inserted remove logger -s Panasonic LMEK0406 removed #----------------------------------------------------------------------- # ATAPI ZIP Drive #----------------------------------------------------------------------- # CitiDISK & Addonics PocketZIP card "Shining" "PMIDE-ASC" config default "wdc1" any 0x2000 insert logger -s CitiDISK/PocketZIP inserted remove logger -s CitiDISK/PocketZIP removed #----------------------------------------------------------------------- # # Ongoing Projects ---- These entries are for ongoing projects of # our package. Most of these entries do not work. # #----------------------------------------------------------------------- #----------------------------------------------------------------------- # Sound cards #----------------------------------------------------------------------- # RATOC REX-5570 Sound Card card "1195 RATOC System Inc\." "REX5570 SOUND CARD" config default "opl0" any #----------------------------------------------------------------------- # Multifunction cards #----------------------------------------------------------------------- # Multifunction card support is still under development. If you want # to use them as modem only in conservative way, uncomment "modem-only" # definitions, comment-out multifunction definitions, and recompile # pccardd and kernel without MULTIFUNC option. (see # PAO-dir/usr.sbin/pccard/pccardd and PAO config file for details) # Tatsumi Hosokawa # APEX DATA MultiCard (as Modem only) card "APEX DATA" "MULTICARD" config 0xb "sio3" any insert logger -s APEX DATA MultiCard inserted as Modem remove logger -s APEX DATA MultiCard removed # Megahertz multifunction card: # The second multifunction definition does not work (under development). # if you want to use this card as modem, uncomment the first one. # Megahertz X-Jack Ethernet/Modem 14.4K (as Modem only) card "Megahertz" "XJEM1144/CCEM1144" config 0x27 "sio3" any insert logger -s Megahertz X-Jack Multifunction Card inserted as Modem. remove logger -s Megahertz X-Jack Multifunction Card removed. # Megahertz X-Jack Ethernet/Modem 14.4K #card "MEGAHERTZ" "XJEM1144/CCEM1144" # multifunc # config default "sn0" any # config 0x27 "sio3" shared # insert logger -s Megahertz X-Jack Multifunction Card inserted # remove logger -s Megahertz X-Jack Multifunction Card removed # TDK Multifunctioon Card (as Modem) card "TDK" "GlobalNetworker 3410/3412" config default "sio3" any insert logger -s TDK Multifunction Card inserted as Modem remove logger -s TDK Multifunction Card removed # Toshiba Modem/LAN card IPC5001B card "TOSHIBA" "Modem/LAN Card" config 0x25 "sio3" any insert logger -s TOSHIBA IPC5001B Multifunction Card inserted as Modem remove logger -s TOSHIBA IPC5001B Multifunction Card removed # Motorola Marine multifunction card (as modem) card "Motorola, Inc\." "MARINER MODEM/FAX/LAN" config 0x35 "sio3" any insert logger -s Motorola Marine inserted as Modem remove logger -s Motorola Marine removed # Xircom CreditCard Ethernet 10/100+ Modem 56 (as modem) card "Xircom" "CreditCard Ethernet" config 0x27 "sio3" any insert logger -s Xircom CEM56 Card inserted as Modem remove logger -s Xircom CEM56 Card removed # Intel EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter (as modem) card "Intel" "EtherExpress\(TM\) PRO/100 LAN/Modem PC Card Adapter" config 0x1f "sio3" any insert logger -s Intel EtherExpress PRO/100 LAN/Modem as Modem remove logger -s Intel EtherExpress PRO/100 LAN/Modem # RATOC REX-5572 (as SCSI only) card "RATOC System Inc\." "SOUND/SCSI2 CARD.*" config default "ncv0" any 0x84d00000 cardio 0x640 0x10 insert logger -s RATOC SOUND/SCSI2 REX-5572 inserted as SCSI remove logger -s RATOC SOUND/SCSI2 REX-5572 removed # IO DATA PCMF144/20 (as Flash ATA only) card "IO DATA" "ATA&MODEM" config 0x7 "wdc1" any insert logger -s IO DATA PCMF144/20 inserted as ATA remove logger -s IO DATA PCMF144/20 removed # Telecom Device SuperSocket LM336 (as Ethernet only) card "PCMCIAs" "LanModem" config default "ed0" any insert logger -s SuperSocket LM336 inserted as Ethernet insert /etc/pccard_ether $device remove logger -s SuperSocket LM336 removed remove /etc/pccard_ether_remove $device #----------------------------------------------------------------------- # Wireless LAN #----------------------------------------------------------------------- # NCR Wavelan PCMCIA # If you want to use Japanese version, uncomment the second config # line and comment-out the first line. card "NCR" "WaveLAN/PCMCIA" config default "wlp0" any # US version (915MHz) # config default "wlp0" any 0x01 # Japanese version (2.4GHz) ether wavelan insert logger -s NCR WaveLAN PCMCIA inserted insert /etc/pccard_ether $device remove logger -s NCR WaveLAN PCMCIA removed remove /etc/pccard_ether_remove $device # AT&T GIS Wavelan PCMCIA # If you want to use Japanese version, uncomment the second config # line and comment-out the first line. card "AT&T" "WaveLAN/PCMCIA" config default "wlp0" any # US version (915MHz) # config default "wlp0" any 0x01 # Japanese version (2.4GHz) ether wavelan insert logger -s AT\&T WaveLAN PCMCIA inserted insert /etc/pccard_ether $device remove logger -s AT\&T WaveLAN PCMCIA removed remove /etc/pccard_ether_remove $device # Digital RoamAbout/DS card "Digital" "RoamAbout/DS" config default "wlp0" any ether wavelan insert logger -s Digital RoamAbout/DS inserted insert /etc/pccard_ether $device remove logger -s Digital RoamAbout/DS removed remove /etc/pccard_ether_remove $device # NetWave AirSurfer # NOTE: For some machines, wait cycle for memory access is required. # you should change "0x40" on the last part of "cardmem" line to "0x44", # like: # cardmem 0xd4000 0x20000 0x9000 0x44 # IBM ThinkPads are known to require this change. card "Xircom" "CreditCard Netwave" config 0x01 "cnw0" any cardmem 0xd4000 0x20000 0x9000 0x40 # config 0x01 "cnw1" any # cardmem 0xdd000 0x20000 0x9000 0x40 ether 0x126 00:80:c7 00:20:d8 insert logger -s Netwave Ethernet inserted insert /etc/pccard_ether $device remove logger -s Netwave Ethernet removed remove /etc/pccard_ether_remove $device # Victor M-MOIL CARD card "JVC" "MiniMoil Ethernet Card" config 0x01 "sn0" any insert logger -s MiniMoil Ethernet inserted insert /etc/pccard_ether $device remove logger -s MiniMoil Ethernet removed remove /etc/pccard_ether_remove $device # ICOM UX-136 card "AMD" "Am79C930" config default "ux0" any cardmem 0xd4000 0 0x8000 0x40 insert logger -s UX-136 Wireless LAN inserted insert /etc/pccard_ether $device remove logger -s UX-136 Wireless LAN removed remove /etc/pccard_ether_remove $device #----------------------------------------------------------------------- # Video Capture Cards #----------------------------------------------------------------------- # IBM Smart Capture Card card "IBM Corp\." "Video Capture" config default "scc0" pio cardmem 0xd4000 0x0 0x8000 insert logger -s Smart Capture Card inserted remove logger -s Smart Capture Card removed #----------------------------------------------------------------------- # Speech Synthesizer Cards #----------------------------------------------------------------------- # Hitachi microcomputer speech synthesizer card card "HITACHI MICROCOMPUTER SYSTEM LTD." "MSSHVPC02" config default "hss0" pio insert logger -s Hitachi microcomputer speech synthesizer inserted remove logger -s Hitachi microcomputer speech synthesizer removed #----------------------------------------------------------------------- # Joystick Port Cards #----------------------------------------------------------------------- card "IO DATA" "PCJOY" config default "joy0" pio # config 0x1 "joy0" pio # config 0x2 "joy0" pio insert logger -s IO DATA PCJOY inserted remove logger -s IO DATA PCJOY removed #----------------------------------------------------------------------- # Floppy Drive Cards #----------------------------------------------------------------------- # Libretto floppy drive. card "Y-E DATA" "External FDD" config 0x4 "fdc1" any insert logger -s Y-E DATA External FDD inserted remove logger -s Y-E DATA External FDD removed # ------------------------------------------------------------------- # # Experimental ---- If you have one of them, please e-mail me *WHETHER # IT WORKS OR NOT*. I wrote these entries by reading Linux PCMCIA driver # package. I've not tested them. I need results of your experiences. # Especially, if the ed_probe() is succeeded, it does not always mean # that probed MAC address is correct. If you have or if your friend # has these cards, send me the result of the results of # # pccardc dumpcis # and # pccardc rdattr 0 0 1000 (the first 0 means slot number) # # of these cards. I can write more accurate pccard.conf entries if I # can read these result. # # I NEED YOUR HELP!!!! # # Thanks. # # My e-mail address is hosokawa@jp.FreeBSD.org (Tatsumi Hosokawa) # # ------------------------------------------------------------------- #----------------------------------------------------------------------- # Ethernet Cards #----------------------------------------------------------------------- # CNet CN30BC Ethernet Card card "CNet.*" "CN30BC" config default "ed0" any 0x10 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # DataTrek NetCard card "DataTrek\." "NetCard" config default "ed0" any 0x10 ether 0xff0 00:20:e8 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # Edimax Ethernet Combo card "Edimax Technology Inc\." "PCMCIA" config default "ed0" any 0x10 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # EP-210 Ethernet Card card "Ethernet PCMCIA adapter" "EP-210" config default "ed0" any 0x10 ether 0x110 00:40:33 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # Katron PE-520 Ethernet Card card "KCI" "PE520 PCMCIA Ethernet Adapter" config default "ed0" any 0x10 ether 0x110 00:40:f6 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # Maxtech PCN2000 Ethernet card "MAXTECH" "PCN2000" config default "ed0" any 0x10 ether 0x5000 00:00:e8 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # NE2000 Compatible Ethernet Card card "NE2000 Compatible" "PCMCIA" config default "ed0" any 0x10 ether 0xff0 00:a0:0c insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # RPTI EP400 Ethernet Card card "RPTI LTD\." "EP400" config default "ed0" any 0x10 ether 0x110 00:40:95 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # SMC EliteCard Ethernet card "SMC" "PCM Ethernet Adapter" config default "sn0" any ether attr2hex insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # Socket EA LAN Adapter # This card should not work because of its broken DMA status register, # if you have this card, please fix this bug. card "Socket Communications Inc" "Socket EA PCMCIA LAN.*" # This card has broken CIS tupples # We can't use "default" config 0x1 "ed0" any 0x30 ether 0x4000 00:c0:1b insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # ------------------------------------------------------------------- # # "Wildcard" entries # # ------------------------------------------------------------------- # GENERIC PCMCIA modem function serial config auto "sio3" any # config 0x23 "sio3" any # alternative definitions # config 0x21 "sio3" any # ......... # config 0x22 "sio3" any # config 0x23 "sio3" pio # config 0x21 "sio3" pio # config 0x22 "sio3" pio # config 0x23 "sio3" 5 # config 0x21 "sio3" 5 # config 0x22 "sio3" 5 # reset 100 # default reset 1000 # safety reset time # reset 10000 # for unstable cards insert logger -s PCMCIA Modem inserted remove logger -s PCMCIA Modem removed # GENERIC Flash ATA / ATA HDD function fixed_disk # config default "wdc1" 15 # config default "wdc1" any # config 0x03 "wdc1" 15 config 0x03 "wdc1" any insert logger -s Flash ATA / ATA HDD inserted remove logger -s Flash ATA / ATA HDD removed