Network Working Group
Internet Engineering Task Force (IETF)                         A. Newton
Internet-Draft
Request for Comments: 7483                                          ARIN
Intended status:
Category: Standards Track                                  S. Hollenbeck
Expires: July 4, 2015
ISSN: 2070-1721                                            Verisign Labs
                                                       December 31, 2014
                                                              March 2015

    JSON Responses for the Registration Data Access Protocol (RDAP)
                   draft-ietf-weirds-json-response-14

Abstract

   This document describes JSON data structures representing
   registration information maintained by Regional Internet Registries
   (RIRs) and Domain Name Registries (DNRs).  These data structures are
   used to form Registration Data Access Protocol (RDAP) query
   responses.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list  It represents the consensus of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid the IETF community.  It has
   received public review and has been approved for a maximum publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of six months this document, any errata,
   and how to provide feedback on it may be updated, replaced, or obsoleted by other documents obtained at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on July 4, 2015.
   http://www.rfc-editor.org/info/rfc7483.

Copyright Notice

   Copyright (c) 2014 2015 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Terminology and Definitions . . . . . . . . . . . . . . .   3
     1.2.  Data Model  . . . . . . . . . . . . . . . . . . . . . . .   4
   2.  Use of JSON . . . . . . . . . . . . . . . . . . . . . . . . .   5
     2.1.  Naming  . . . . . . . . . . . . . . . . . . . . . . . . .   5
   3.  Common Data Types . . . . . . . . . . . . . . . . . . . . . .   7
   4.  Common Data Structures  . . . . . . . . . . . . . . . . . . .   9   8
     4.1.  RDAP Conformance  . . . . . . . . . . . . . . . . . . . .   9   8
     4.2.  Links . . . . . . . . . . . . . . . . . . . . . . . . . .   9
     4.3.  Notices And and Remarks . . . . . . . . . . . . . . . . . . .  10
     4.4.  Language Identifier . . . . . . . . . . . . . . . . . . .  12  11
     4.5.  Events  . . . . . . . . . . . . . . . . . . . . . . . . .  13  12
     4.6.  Status  . . . . . . . . . . . . . . . . . . . . . . . . .  14  13
     4.7.  Port 43 WHOIS Server  . . . . . . . . . . . . . . . . . .  14  13
     4.8.  Public IDs  . . . . . . . . . . . . . . . . . . . . . . .  14  13
     4.9.  Object Class Name . . . . . . . . . . . . . . . . . . . .  14  13
     4.10. An Example  . . . . . . . . . . . . . . . . . . . . . . .  15  14
   5.  Object Classes  . . . . . . . . . . . . . . . . . . . . . . .  17  16
     5.1.  The Entity Object Class . . . . . . . . . . . . . . . . .  17  16
     5.2.  The Nameserver Object Class . . . . . . . . . . . . . . .  24  23
     5.3.  The Domain Object Class . . . . . . . . . . . . . . . . .  28  27
     5.4.  The IP Network Object Class . . . . . . . . . . . . . . .  40  39
     5.5.  Autonomous System Number Entity Object Class  . . . . . .  44  43
   6.  Error Response Body . . . . . . . . . . . . . . . . . . . . .  47  46
   7.  Responding to Help Queries  . . . . . . . . . . . . . . . . .  49  48
   8.  Responding To Searches  . . . . . . . . . . . . . . . . . . .  50  49
   9.  Indicating Truncated Responses  . . . . . . . . . . . . . . .  51  50
   10. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  54  53
     10.1.  RDAP JSON Media Type Registration  . . . . . . . . . . .  54  53
     10.2.  JSON Values Registry . . . . . . . . . . . . . . . . . .  55  54
       10.2.1.  Notice and Remark Types  . . . . . . . . . . . . . .  56  55
       10.2.2.  Status . . . . . . . . . . . . . . . . . . . . . . .  58  57
       10.2.3.  Event Actions  . . . . . . . . . . . . . . . . . . .  63  62
       10.2.4.  Roles  . . . . . . . . . . . . . . . . . . . . . . .  66  65
       10.2.5.  Variant Relations  . . . . . . . . . . . . . . . . .  69  68
   11. Security Considerations . . . . . . . . . . . . . . . . . . .  70  69
   12. Internationalization Considerations . . . . . . . . . . . . .  71  70
     12.1.  Character Encoding . . . . . . . . . . . . . . . . . . .  71  70
     12.2.  URIs and IRIs  . . . . . . . . . . . . . . . . . . . . .  71  70
     12.3.  Language Tags  . . . . . . . . . . . . . . . . . . . . .  71  70
     12.4.  Internationalized Domain Names . . . . . . . . . . . . .  71  70
   13. Privacy Considerations  . . . . . . . . . . . . . . . . . . .  71  70
   14. Contributing Authors and Acknowledgements . . . . . . . . . .  72
   15. References  . . . . . . . . . . . . . . . . . . . . . . . . .  73
     15.1.  71
     14.1.  Normative References . . . . . . . . . . . . . . . . . .  73
     15.2.  71
     14.2.  Informative References . . . . . . . . . . . . . . . . .  74  72
   Appendix A.  Suggested Data Modeling with the Entity Object Class  75  74
     A.1.  Registrants and Contacts  . . . . . . . . . . . . . . . .  75  74
     A.2.  Registrars  . . . . . . . . . . . . . . . . . . . . . . .  77  76
   Appendix B.  Modeling Events  . . . . . . . . . . . . . . . . . .  79  78
   Appendix C.  Structured vs vs. Unstructured Addresses  . . . . . . . .  81  80
   Appendix D.  Secure DNS . . . . . . . . . . . . . . . . . . . . .  84  82
   Appendix E.  Motivations for Using JSON . . . . . . . . . . . . .  84  83
   Appendix F.  Changelog  . . .  Acknowledgements . . . . . . . . . . . . . . . . . .  85  83
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  91  84

1.  Introduction

   This document describes responses in the JSON [RFC7159] format for
   the queries as defined by the Registration Data Access Protocol
   Lookup Query
   Format [I-D.ietf-weirds-rdap-query].
   [I-D.ietf-weirds-using-http] describes a [RFC7482].  A communication protocol for exchanging queries
   and responses. responses is described in [RFC7480].

1.1.  Terminology and Definitions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119] when
   specified in their uppercase forms.

   The following list describes terminology and definitions used
   throughout this document:

   DNR:              Domain Name Registry

   LDH:              Letters, Digits, Hyphen              letters, digits, hyphen

   member:           data found within an object as defined by JSON
                     [RFC7159].

   object:           a data structure as defined by JSON [RFC7159].

   object class:     the definition of members that may be found in JSON
                     objects described in this document.

   object instance:  an instantiation or specific instance of an object
                     class.

   RDAP:             Registration Data Access Protocol

   RIR:              Regional Internet Registry

1.2.  Data Model

   The data model for JSON responses is specified in five sections:

   1.  simple data types conveyed in JSON strings

   2.  data structures specified as JSON arrays or objects that are used
       repeatedly when building up larger objects

   3.  object classes representing structured data corresponding to a
       lookup of a single object

   4.  arrays of objects representing structured data corresponding to a
       search for multiple objects

   5.  the response to an error

   The object classes represent responses for two major categories of
   data: responses returned by Regional Internet Registries (RIRs) RIRs for
   registrations registration data related to IP
   addresses, reverse DNS names, and Autonomous System numbers; numbers and
   responses returned by Domain Name
   Registries (DNRs) DNRs for registration data related to forward
   DNS names.  The following object classes are returned by both RIRs
   and DNRs:

   1.  domains

   2.  nameservers

   3.  entities

   The information served by both RIRs and DNRs for these object classes
   overlap extensively and are given in this document as a unified model
   for both classes of service.

   In addition to the object classes listed above, RIRs also serve the
   following object classes:

   1.  IP networks

   2.  Autonomous System numbers

   Object classes defined in this document represent a minimal set of
   what a compliant client/server needs to understand to function
   correctly, however
   correctly; however, some deployments may want to include additional
   object classes to suit individual needs.  Anticipating this need for
   extension, Section 2.1 of this document defines a mechanism for
   extending the JSON objects that are described in this document.

   Positive responses take two forms.  A response to a lookup of a
   single object in the registration system yields a JSON object object, which
   is the subject of the lookup.  A response to a search for multiple
   objects yields a JSON object that contains an array of JSON objects
   that are the subject of the search.  In each type of response, other
   data structures are present within the topmost JSON object.

2.  Use of JSON

2.1.  Naming

   Clients of these JSON responses SHOULD ignore unrecognized JSON
   members in responses.  Servers can insert members into the JSON
   responses
   responses, which are not specified in this document, but that does
   not constitute an error in the response.  Servers which that insert such
   unspecified members into JSON responses SHOULD have member names
   prefixed with a short identifier followed by an underscore followed
   by a meaningful name.  It has been observed that these short
   identifiers aid software implementers with identifying the
   specification of the JSON member, and failure to use one could cause
   an implementer to assume the server is erroneously using a name from
   this specification.  This allowance does not apply to jCard
   ([RFC7095]) [RFC7095]
   objects.  The full JSON name (the prefix plus the underscore plus the
   meaningful name) SHOULD adhere to the character and name limitations
   of the prefix registry described in
   [I-D.ietf-weirds-using-http]. [RFC7480].  Failure to use these
   limitations could result in slower adoption as these limitations have
   been observed to aid some client programming models.

   Consider the following JSON response with JSON members, all of which
   are specified in this document.

   {
     "handle" : "ABC123",
     "remarks" :
     [
       {
         "description" :
         [
           "She sells sea shells down by the sea shore.",
           "Originally written by Terry Sullivan."
         ]
       }
     ]
   }

                                 Figure 1
   If The Registry of the Moon desires to express information not found
   in this specification, it might select "lunarNic" as its identifying
   prefix and insert, as an example, the member named
   "lunarNic_beforeOneSmallStep" to signify registrations occurring
   before the first moon landing and the member named
   "lunarNic_harshMistressNotes" containing that contains other descriptive text.

   Consider the following JSON response with JSON names, some of which
   should be ignored by clients without knowledge of their meaning.

   {
     "handle" : "ABC123",
     "lunarNic_beforeOneSmallStep" : "TRUE THAT!",
     "remarks" :
     [
       {
         "description" :
         [
           "She sells sea shells down by the sea shore.",
           "Originally written by Terry Sullivan."
         ]
       }
     ],
     "lunarNic_harshMistressNotes" :
     [
       "In space,",
       "nobody can hear you scream."
     ]
   }

                                 Figure 2

   Insertion of unrecognized members ignored by clients may also be used
   for future revisions to this specification.

   Clients processing JSON responses need to be prepared for members
   representing registration data specified in this document to be
   absent from a response.  In other words, servers are free to not
   include JSON members containing registration data based on their own
   policies.

   Finally, all JSON names specified in this document are case
   sensitive.  Both servers and clients MUST transmit and process them
   using the specified character case.

3.  Common Data Types

   JSON [RFC7159] defines the data types of a number, character string,
   boolean, array, object object, and null.  This section describes the
   semantics and/or syntax reference for common, JSON character strings
   used in this document.

   handle:           DNRs and RIRs have registry-unique identifiers that
                     may be used to specifically reference an object
                     instance.  The semantics of this data type as found
                     in this document are to be a registry-unique
                     reference to the closest enclosing object where the
                     value is found.  The data type names 'registryId',
                     'roid', 'nic-handle', 'registrationNo', etc. "registryId",
                     "roid", "nic-handle", "registrationNo", etc., are
                     terms often synonymous with this data type.  In
                     this document, the term 'handle' "handle" is used.  The term
                     exposed to users by clients is a presentation issue
                     beyond the scope of this document.

   IPv4 addresses:   The representation of IPv4 addresses in this
                     document uses the dotted-decimal notation.  An
                     example of this textual representation is
                     '192.0.2.0'.
                     "192.0.2.0".

   IPv6 addresses:   The representation of IPv6 addresses in this
                     document follow the forms outlined in [RFC5952].
                     An example of this textual representation is
                     '2001:db8::1:0:0:1'.
                     "2001:db8::1:0:0:1".

   country codes:    Where the identity of a geopolitical nation or
                     country is needed, these identities are represented
                     with the alpha-2 or two-character country code
                     designation as defined in [ISO.3166.1988].  The
                     alpha-2 representation is used because it is freely
                     available
                     available, whereas the alpha-3 and numeric-3
                     standards are not.

   LDH names:        Textual representations of DNS names where the
                     labels of the domain are all "letters, digits,
                     hyphen" labels as described by [RFC5890].  Trailing
                     periods are optional.

   Unicode names:    Textual representations of DNS names where one or
                     more of the labels are U-labels as described by
                     [RFC5890].  Trailing periods are optional.

   dates and times:  The syntax for values denoting dates and times is
                     defined in [RFC3339].

   URIs:             The syntax for values denoting a Uniform Resource
                     Identifier (URI) is defined by [RFC3986].

   Contact information is defined using jCards (JSON vCards) as described in [RFC7095]
   [RFC7095].

4.  Common Data Structures

   This section defines common data structures used in responses and
   object classes.

4.1.  RDAP Conformance

   The data structure named "rdapConformance" is an array of strings,
   each providing a hint as to the specifications used in the
   construction of the response.  This data structure appears only in
   the top most topmost JSON object of a response.

   An example rdapConformance data structure:

   "rdapConformance" :
   [
     "rdap_level_0"
   ]

                                 Figure 3

   The string literal "rdap_level_0" signifies conformance with this
   specification.  When custom JSON values are inserted into responses,
   conformance to those custom specifications MUST use a string prefixed
   with the appropriate identifier from the IANA RDAP Extensions
   registry specified in [I-D.ietf-weirds-using-http]. [RFC7480].  For example, if the fictional
   Registry of the Moon wants to signify that their JSON responses are
   conformant with their registered extensions, the string used might be
   "lunarNIC_level_0".  These prefixes aid the identification of
   specifications for software implementers, and failure to use them
   could result in slower adoption of extensions.

   Example rdapConformance structure with custom extensions noted:

   "rdapConformance" :
   [
     "rdap_level_0",
     "lunarNic_level_0"
   ]

                                 Figure 4

4.2.  Links

   The "links" array is found in data structures to signify links to
   other resources on the Internet.  The relationship of these links is
   defined by the IANA registry described by [RFC5988].

   The following is an example of the link structure:

       {
         "value" : "http://example.com/context_uri",
         "rel" : "self",
         "href" : "http://example.com/target_uri",
         "hreflang" : [ "en", "ch" ],
         "title" : "title",
         "media" : "screen",
         "type" : "application/json"
       }

                                 Figure 5

   The JSON name/values of "rel", "href", "hreflang", "title", "media",
   and "type" correspond to values found in Section 5 of [RFC5988].  The
   "value" JSON value is the context URI as described by [RFC5988].  The
   "href" JSON value MUST be specified.  All other JSON values are
   OPTIONAL.

   This is an example of the "links" array as it might be found in an
   object class:

       "links" :
       [
           {
             "value" : "http://example.com/ip/2001:db8::123",
             "rel" : "self",
             "href" : "http://example.com/ip/2001:db8::123",
             "type" : "application/rdap+json"
           },
           {
             "value" : "http://example.com/ip/2001:db8::123",
             "rel" : "up",
             "href" : "http://example.com/ip/2001:db8::/48",
             "type" : "application/rdap+json"
           }

       ]

                                 Figure 6

4.3.  Notices And and Remarks

   The "notices" and "remarks" data structures take the same form.  The
   "notices"
   notices structure denotes information about the service providing
   RDAP information and/or information about the entire response,
   whereas the "remarks" remarks structure denotes information about the object
   class that contains it (see Section 5 regarding object classes).

   Both are arrays of objects.  Each object contains an optional "title"
   string representing the title of the object, an optional "type"
   string denoting a registered type of remark or notice (see
   Section 10.2.1), an array of strings named "description" for the
   purposes of conveying any descriptive text, and an optional "links"
   array as described in Section 4.2.

   An example of the notices data structure:

   "notices" :
   [
     {
       "title" : "Terms of Use",
       "description" :
       [
         "Service subject to The Registry of the Moon's TOS.",
         "Copyright (c) 2020 LunarNIC"
       ],
       "links" :
       [
         {
           "value" : "http://example.net/entity/XXXX",
           "rel" : "alternate",
           "type" : "text/html",
           "href" : "http://www.example.com/terms_of_use.html"
         }
       ]
     }
   ]

                                 Figure 7

   It is the job of the clients to determine line breaks, spacing spacing, and
   display issues for sentences within the character strings of the
   "description" array.  Each string in the "description" array contains
   a single complete division of human readable human-readable text indicating to
   clients where there are semantic breaks.

   An example of the remarks data structure:

   "remarks" :
   [
     {
       "description" :
       [
         "She sells sea shells down by the sea shore.",
         "Originally written by Terry Sullivan."
       ]
     }
   ]

                                 Figure 8

   Note that objects in the "remarks" array may also have a "links"
   array.

   While the "title" and "description" fields are intended primarily for
   human consumption, the "type" string contains a well-known value to
   be registered with IANA (see Section 10.2.1) for programmatic use.

   An example of the remarks data structure:

   "remarks" :
   [
     {
       "type" : "object truncated due to authorization",
       "description" :
       [
         "Some registration data may not have been given.",
         "Use proper authorization credentials to see all of it."
       ]
     }
   ]

                                 Figure 9

   While the "remarks" array will appear in many object classes in a
   response, the "notices" array appears only in the top most topmost object of a
   response.

4.4.  Language Identifier

   This data structure consists solely of a name/value pair, where the
   name is "lang" and the value is a string containing a language
   identifier as described in [RFC5646].

   "lang" : "mn-Cyrl-MN"

                                 Figure 10

   The 'lang' "lang" attribute may appear anywhere in an object class or data
   structure except for in jCard objects.

4.5.  Events

   This data structure represents events that have occurred on an
   instance of an object class (see Section 5 regarding object classes).

   This is an example of an "events" array.

   "events" :
   [
     {
       "eventAction" : "registration",
       "eventActor" : "SOMEID-LUNARNIC",
       "eventDate" : "1990-12-31T23:59:59Z"
     },
     {
       "eventAction" : "last changed",
       "eventActor" : "OTHERID-LUNARNIC",
       "eventDate" : "1991-12-31T23:59:59Z"
     }
   ]

                                 Figure 11

   The "events" array consists of objects, each with the following
   members:

   o  'eventAction'  "eventAction" -- a string denoting the reason for the event

   o  'eventActor'  "eventActor" -- an optional identifier denoting the actor
      responsible for the event

   o  'eventDate'  "eventDate" -- a string containing the time and date the event
      occurred.

   o  'links'  "links" -- see Section 4.2. 4.2

   Events can be future dated.  One use case for future dating of events
   is to denote when an object expires from a registry.

   The 'links' "links" array in this data structure is provided for references
   to the event actor.  In order to reference an RDAP entity, a "rel" of
   "related" and a "type" of "application/rdap+json" is used in the link
   reference.

   See Section 10.2.3 for a list of values for the 'eventAction' "eventAction" string.
   See Appendix B regarding the various ways events can be modeled.

4.6.  Status

   This data structure, named 'status', "status", is an array of strings
   indicating the state of a registered object (see Section 10.2.2 for a
   list of values).

4.7.  Port 43 WHOIS Server

   This data structure, a member named 'port43', "port43", is a simple string
   containing the fully-qualified fully qualified host name or IP address of the WHOIS
   [RFC3912] server where the containing object instance may be found.
   Note that this is not a URI, as there is no WHOIS URI scheme.

4.8.  Public IDs

   This data structure maps a public identifier to an object class.  It
   is named 'publicIds' "publicIds" and is an array of objects, with each object
   containing the following members:

   o  type - -- a string denoting the type of public identifier

   o  identifier - -- a public identifier of the type denoted by 'type' "type"

   The following is an example of a 'publicIds' publicIds structure.

   "publicIds":
   [
     {
       "type":"IANA Registrar ID",
       "identifier":"1"
     }
   ]

                                 Figure 12

4.9.  Object Class Name

   This data structure, a member named "objectClassName", gives the
   object class name of a particular object as a string.  This
   identifies the type of object being processed.  An objectClassName is
   REQUIRED in all RDAP response objects so that the type of the object
   can be interpreted.

4.10.  An Example

   This is an example response with both rdapConformance and notices
   embedded:

   {
     "rdapConformance" :
     [
       "rdap_level_0"
     ],
     "notices" :
     [
       {
         "title" : "Content Removed",
         "description" :
         [
           "Without full authorization, content has been removed.",
           "Sorry, dude!"
         ],
         "links" :
         [
           {
             "value" : "http://example.net/ip/192.0.2.0/24",
             "rel" : "alternate",
             "type" : "text/html",
             "href" : "http://www.example.com/redaction_policy.html"
           }
         ]
       }
     ],
     "lang" : "en",
     "objectClassName" : "ip network",
     "startAddress" : "192.0.2.0",
     "endAddress" : "192.0.2.255",
     "handle" : "XXXX-RIR",
     "ipVersion" : "v4",
     "name": "NET-RTR-1",
     "parentHandle" : "YYYY-RIR",
     "remarks" :
     [
       {
         "description" :
         [
           "She sells sea shells down by the sea shore.",
           "Originally written by Terry Sullivan."
         ]
       }
     ]
   }

                                 Figure 13

5.  Object Classes

   Object classes represent structures appropriate for a response from
   the queries specified in [I-D.ietf-weirds-rdap-query]. [RFC7482].

   Each object class contains a "links" array as specified in
   Section 4.2.  For every object class instance in a response, whether
   the object class instance is directly representing the response to a
   query or is embedded in other object class instances or is an item in
   a search result set, servers SHOULD provide a link representing a URI
   for that object class instance using the "self" relationship as
   described in the IANA registry specified by [RFC5988].  As explained
   in Section 5.2, this may be not always be possible for name server nameserver
   data.  Clients MUST be able to process object instances without a
   "self"
   self link.  When present, clients can use the self link for caching
   data.  Servers MAY provide more than one "self" self link for any given
   object instance.  Failure to provide any "self" self link by a server may
   result in clients being unable to cache object class instances.

   Clients using "self" self links for caching SHOULD not cache any object
   class instances where the authority of the self link is different
   than the authority of the server returning the data.  Failing to do
   so might result in cache poisoning.

   Self links MUST contain a "type" element containing the "application/
   rdap+json" media type when referencing RDAP object instances as
   defined by this document.

   This is an example of the "links" array with a self link to an object
   class:

       "links" :
       [
           {
             "value" : "http://example.com/ip/2001:db8::123",
             "rel" : "self",
             "href" : "http://example.com/ip/2001:db8::123",
             "type" : "application/rdap+json"
           }
       ]

                                 Figure 14

5.1.  The Entity Object Class

   The entity object class appears throughout this document and is an
   appropriate response for the /entity/XXXX query defined in
   Registration
   "Registration Data Access Protocol Lookup Format
   [I-D.ietf-weirds-rdap-query]. (RDAP) Query Format" [RFC7482].

   This object class represents the information of organizations,
   corporations, governments, non-profits, clubs, individual persons,
   and informal groups of people.  All of these representations are so
   similar that it is best to represent them in JSON [RFC7159] with one
   construct, the entity object class, to aid in the re-use reuse of code by
   implementers.

   The entity object class uses jCard [RFC7095] to represent contact
   information, such as postal addresses, email addresses, phone numbers
   and names of organizations and individuals.  Many of the types of
   information that can be represented with jCard have no use in RDAP,
   such as birthdays, anniversaries, and gender.

   The entity object is served by both RIRs and DNRs.  The following is
   an example of an entity that might be served by an RIR.

   {
     "objectClassName" : "entity",
     "handle":"XXXX",
     "vcardArray":[
       "vcard",
       [
         ["version", {}, "text", "4.0"],
         ["fn", {}, "text", "Joe User"],
         ["n", {}, "text",
           ["User", "Joe", "", "", ["ing. jr", "M.Sc."]]
         ],
         ["kind", {}, "text", "individual"],
         ["lang", {
           "pref":"1"
         }, "language-tag", "fr"],
         ["lang", {
           "pref":"2"
         }, "language-tag", "en"],
         ["org", {
           "type":"work"
         }, "text", "Example"],
         ["title", {}, "text", "Research Scientist"],
         ["role", {}, "text", "Project Lead"],
         ["adr",
           { "type":"work" },
           "text",
           [
             "",
             "Suite 1234",
             "4321 Rue Somewhere",
             "Quebec",
             "QC",
             "G1V 2M2",
             "Canada"
           ]
         ],
         ["adr",
           {
             "type":"home",
             "label":"123 Maple Ave\nSuite 90001\nVancouver\nBC\n1239\n"
           },
           "text",
           [
             "", "", "", "", "", "", ""
           ]
         ],
         ["tel",
           {
             "type":["work", "voice"],
             "pref":"1"
           },
           "uri",
           "tel:+1-555-555-1234;ext=102"
         ],
         ["tel",
           { "type":["work", "cell", "voice", "video", "text"] },
           "uri",
           "tel:+1-555-555-4321"
         ],
         ["email",
           { "type":"work" },
           "text",
           "joe.user@example.com"
         ],
         ["geo", {
           "type":"work"
         }, "uri", "geo:46.772673,-71.282945"],
         ["key",
           { "type":"work" },
           "uri",
           "http://www.example.com/joe.user/joe.asc"
         ],
         ["tz", {},
           "utc-offset", "-05:00"],
         ["url", { "type":"home" },
           "uri", "http://example.org"]
       ]
     ],
     "roles":[ "registrar" ],
     "publicIds":[
       {
         "type":"IANA Registrar ID",
         "identifier":"1"
       }
     ],
     "remarks":[
       {
         "description":[
           "She sells sea shells down by the sea shore.",
           "Originally written by Terry Sullivan."
         ]
       }
     ],
     "links":[
       {
         "value":"http://example.com/entity/XXXX",
         "rel":"self",
         "href":"http://example.com/entity/XXXX",
         "type" : "application/rdap+json"
       }
     ],
     "events":[
       {
         "eventAction":"registration",
         "eventDate":"1990-12-31T23:59:59Z"
       }
     ],
     "asEventActor":[
       {
         "eventAction":"last changed",
         "eventDate":"1991-12-31T23:59:59Z"
       }
     ]
   }

                                 Figure 15

   The entity object class can contain the following members:

   o  objectClassName -- the string "entity"

   o  handle -- a string representing an a registry unique identifier of
      the entity

   o  vcardArray -- a jCard with the entity's contact information
   o  roles -- an array of strings, each signifying the relationship an
      object would have with its closest containing object (see
      Section 10.2.4 for a list of values)

   o  publicIds - -- see Section 4.8

   o  entities - -- an array of entity objects as defined by this section. section

   o  remarks -- see Section 4.3

   o  links -- see Section 4.2

   o  events -- see Section 4.5

   o  asEventActor -- this data structure takes the same form as the
      'events'
      events data structure (see Section 4.5), but each object in the
      array MUST NOT have an 'eventActor' "eventActor" member.  These objects denote
      that the entity is an event actor for the given events.  See
      Appendix B regarding the various ways events can be modeled.

   o  status -- see Section 4.6

   o  port43 -- see Section 4.7

   o  networks -- an array of IP network objects as defined in
      Section 5.4

   o  autnums -- an array of autnum objects as defined in Section 5.5

   Entities may also have other entities embedded with them in an array.
   This can be used to model an organization with specific individuals
   fulfilling designated roles of responsibility.

   The following is an elided example of an entity with embedded
   entities.

   {
     "objectClassName" : "entity",
     "handle" : "ANENTITY",
     "roles" : [ "registrar" ],
     ...
     "entities" :
     [
       {
         "objectClassName" : "entity",
         "handle": "ANEMBEDDEDENTITY",
         "roles" : [ "technical" ],
         ...
       },
       ...
     ],
     ...
   }

                                 Figure 16

   The following is an example of a an entity that might be served by a
   DNR.

   {
     "objectClassName" : "entity",
     "handle":"XXXX",
     "vcardArray":[
       "vcard",
       [
         ["version", {}, "text", "4.0"],
         ["fn", {}, "text", "Joe User"],
         ["kind", {}, "text", "individual"],
         ["lang", {
           "pref":"1"
         }, "language-tag", "fr"],
         ["lang", {
           "pref":"2"
         }, "language-tag", "en"],
         ["org", {
           "type":"work"
         }, "text", "Example"],
         ["title", {}, "text", "Research Scientist"],
         ["role", {}, "text", "Project Lead"],
         ["adr",
           { "type":"work" },
           "text",
           [
             "",
             "Suite 1234",
             "4321 Rue Somewhere",
             "Quebec",
             "QC",
             "G1V 2M2",
             "Canada"
           ]
         ],
         ["tel",
           { "type":["work", "voice"], "pref":"1" },
           "uri", "tel:+1-555-555-1234;ext=102"
         ],
         ["email",
           { "type":"work" },
           "text", "joe.user@example.com"
         ]
       ]
     ],
     "status":[ "validated", "locked" ],
     "remarks":[
       {
         "description":[
           "She sells sea shells down by the sea shore.",
           "Originally written by Terry Sullivan."
         ]
       }
     ],
     "links":[
       {
         "value":"http://example.com/entity/XXXX",
         "rel":"self",
         "href":"http://example.com/entity/XXXX",
         "type":"application/rdap+json"
       }
     ],
     "port43":"whois.example.net",
     "events":[
       {
         "eventAction":"registration",
         "eventDate":"1990-12-31T23:59:59Z"
       },
       {
         "eventAction":"last changed",
         "eventDate":"1991-12-31T23:59:59Z",
         "eventActor":"joe@example.com"
       }
     ]
   }

                                 Figure 17

   See Appendix A for use of the entity object class to model various
   types of entities found in both RIRs and DNRs.  See Appendix C
   regarding structured vs.  unstructured postal addresses in entities.

5.2.  The Nameserver Object Class

   The nameserver object class represents information regarding DNS name
   servers
   nameservers used in both forward and reverse DNS.  RIRs and some DNRs
   register or expose nameserver information as an attribute of a domain
   name, while other DNRs model nameservers as "first class objects".

   The nameserver object class accommodates both models and degrees of
   variation in between.

   The following is an example of a nameserver object.

     {
       "objectClassName" : "nameserver",
       "handle" : "XXXX",
       "ldhName" : "ns1.xn--fo-5ja.example",
       "unicodeName" : "ns1.foo.example",
       "status" : [ "active" ],
       "ipAddresses" :
       {
         "v4": [ "192.0.2.1", "192.0.2.2" ],
         "v6": [ "2001:db8::123" ]
       },
       "remarks" :
       [
         {
           "description" :
           [
             "She sells sea shells down by the sea shore.",
             "Originally written by Terry Sullivan."
           ]
         }
       ],
       "links" :
       [
         {
           "value" : "http://example.net/nameserver/xxxx",
           "rel" : "self",
           "href" : "http://example.net/nameserver/xxxx",
           "type" : "application/rdap+json"
         }
       ],
       "port43" : "whois.example.net",
       "events" :
       [
         {
           "eventAction" : "registration",
           "eventDate" : "1990-12-31T23:59:59Z"
         },
         {
           "eventAction" : "last changed",
           "eventDate" : "1991-12-31T23:59:59Z",
           "eventActor" : "joe@example.com"
         }
       ]
     }

                                 Figure 18
   Figure 18 is an example of a nameserver object with all values given.
   Registries using a first-class nameserver data model would embed this
   in domain objects as well as allowing references to it with the
   "/nameserver" query type (all depending on the registry operators
   policy).  Other registries may pare back the information as needed.
   Figure 19 is an example of a nameserver object as would be found in
   RIRs and some DNRs, while Figure 20 is an example of a nameserver
   object as would be found in other DNRs.

   The following is an example of the simplest nameserver object:

     {
       "objectClassName" : "nameserver",
       "ldhName" : "ns1.example.com"
     }

                                 Figure 19

   The following is an example of a simple nameserver object that might
   be commonly used by DNRs:

     {
       "objectClassName" : "nameserver",
       "ldhName" : "ns1.example.com",
       "ipAddresses" : { "v6" : [ "2001:db8::123", "2001:db8::124" ] }
     }

                                 Figure 20

   As nameservers can be modeled by some registries to be first-class
   objects, they may also have an array of entities (Section 5.1)
   embedded to signify parties responsible for the maintenance,
   registrations, etc. etc., of the nameservers.

   The following is an elided example of a nameserver with embedded
   entities.

   {
     "objectClassName" : "nameserver",
     "handle" : "XXXX",
     "ldhName" : "ns1.xn--fo-5ja.example",
     ...
     "entities" :
     [
       ...
     ],
     ...
   }

                                 Figure 21

   The nameserver object class can contain the following members:

   o  objectClassName - -- the string "nameserver"

   o  handle -- a string representing an a registry unique identifier of
      the nameserver

   o  ldhName -- a string containing the LDH name of the nameserver (see
      Section 3)

   o  unicodeName -- a string containing a DNS Unicode name of the
      nameserver (see Section 3)

   o  ipAddresses -- an object containing the following members:

      *  v6 -- an array of strings containing IPv6 addresses of the
         nameserver

      *  v4 -- an array of strings containing IPv4 addresses of the
         nameserver

   o  entities -- an array of entity objects as defined by Section 5.1. 5.1

   o  status - -- see Section 4.6

   o  remarks - -- see Section 4.3

   o  links - -- see Section 4.2
   o  port43 - -- see Section 4.7

   o  events - -- see Section 4.5

5.3.  The Domain Object Class

   The domain object class represents a DNS name and point of
   delegation.  For RIRs RIRs, these delegation points are in the reverse DNS
   tree, whereas for DNRs DNRs, these delegation points are in the forward
   DNS tree.

   In both cases, the high level high-level structure of the domain object class
   consists of information about the domain registration, nameserver
   information related to the domain name, and entities related to the
   domain name (e.g. (e.g., registrant information, contacts, etc.).

   The following is an elided example of the domain object showing the
   high level
   high-level structure:

   {
     "objectClassName" : "domain",
     "handle" : "XXX",
     "ldhName" : "blah.example.com",
     ...
     "nameservers" :
     [
       ...
     ],
     ...
     "entities" :
     [
       ...
     ]
   }

                                 Figure 22

   The domain object class can contain the following members:

   o  objectClassName -- the string "domain"

   o  handle -- a string representing a registry unique identifier of
      the domain object instance

   o  ldhName -- a string describing a domain name in LDH form as
      described in Section 3
   o  unicodeName -- a string containing a domain name with U-labels as
      described in Section 3

   o  variants -- an array of objects, each containing the following
      values:

      *  relation -- an array of strings, with each string denoting the
         relationship between the variants and the containing domain
         object (see Section 10.2.5 for a list of suggested variant
         relations).

      *  idnTable -- the name of the IDN Internationalized Domain Name (IDN)
         table of codepoints, such as one listed with the IANA (see IDN
         tables [IANA_IDNTABLES]).

      *  variantNames -- an array of objects, with each object
         containing an "ldhName" member and a "unicodeName" member (see
         Section 3).

   o  nameservers -- an array of nameserver objects as defined by
      Section 5.2

   o  secureDNS -- an object with the following members:

      *  zoneSigned -- true if the zone has been signed, false
         otherwise.

      *  delegationSigned -- boolean true if there are DS records in the
         parent, false otherwise.

      *  maxSigLife -- an integer representing the signature life time lifetime in
         seconds to be used when creating the RRSIG DS record in the
         parent zone [RFC5910].

      *  dsData - -- an array of objects, each with the following members:

         +  keyTag -- an integer as specified by the key tag field of a
            DNS DS record as specified by RFC 4034 [RFC4034] in presentation
            format

         +  algorithm -- an integer as specified by the algorithm field
            of a DNS DS record as described by RFC 4034 in presentation
            format

         +  digest -- a string as specified by the digest field of a DNS
            DS record as specified by RFC 4034 in presentation format
         +  digestType -- an integer as specified by the digest type
            field of a DNS DS record as specified by RFC 4034 in
            presentation format

         +  events - -- see Section 4.5

         +  links - -- see Section 4.2

      *  keyData - -- an array of objects, each with the following
         members:

         +  flags -- an integer representing the flags field value in
            the DNSKEY record [RFC4034] in presentation format

         +  protocol - -- an integer representation of the protocol field
            value of the DNSKEY record [RFC4034] in presentation format

         +  publicKey - -- a string representation of the public key in
            the DNSKEY record [RFC4034] in presentation format

         +  algorithm -- an integer as specified by the algorithm field
            of a DNSKEY record as specified by RFC 4034 [RFC4034] in presentation
            format

         +  events - -- see Section 4.5

         +  links - -- see Section 4.2

      See Appendix D for background information on these objects.

   o  entities -- an array of entity objects as defined by Section 5.1. 5.1

   o  status - -- see Section 4.6

   o  publicIds - -- see Section 4.8

   o  remarks - -- see Section 4.3

   o  links - -- see Section 4.2

   o  port43 - -- see Section 4.7

   o  events - -- see Section 4.5

   o  network - -- represents the IP network for which a reverse DNS
      domain is referenced.  See Section 5.4

   The following is an example of a JSON domain object representing a
   reverse DNS delegation point that might be served by an RIR.

   {
     "objectClassName" : "domain",
     "handle" : "XXXX",
     "ldhName" : "0.2.192.in-addr.arpa",
     "nameservers" :
     [
       {
         "objectClassName" : "nameserver",
         "ldhName" : "ns1.rir.example"
       },
       {
         "objectClassName" : "nameserver",
         "ldhName" : "ns2.rir.example"
       }
     ],
     "secureDNS":
     {
       "delegationSigned": true,
       "dsData":
       [
         {
           "keyTag": 12345,
           "algorithm": 3,
           "digestType": 1,
           "digest": "49FD46E6C4B45C55D4AC"
         }
       ]
     },
     "remarks" :
     [
       {
         "description" :
         [
           "She sells sea shells down by the sea shore.",
           "Originally written by Terry Sullivan."
         ]
       }
     ],
     "links" :
     [
       {
         "value": "http://example.net/domain/XXXX",
         "rel" : "self",
         "href" : "http://example.net/domain/XXXXX",
         "type" : "application/rdap+json"
       }
     ],
     "events" :
     [
       {
         "eventAction" : "registration",
         "eventDate" : "1990-12-31T23:59:59Z"
       },
       {
         "eventAction" : "last changed",
         "eventDate" : "1991-12-31T23:59:59Z",
         "eventActor" : "joe@example.com"
       }
     ],
     "entities" :
     [
       {
         "objectClassName" : "entity",
         "handle" : "XXXX",
         "vcardArray":[
           "vcard",
           [
             ["version", {}, "text", "4.0"],
             ["fn", {}, "text", "Joe User"],
             ["kind", {}, "text", "individual"],
             ["lang", {
               "pref":"1"
             }, "language-tag", "fr"],
             ["lang", {
               "pref":"2"
             }, "language-tag", "en"],
             ["org", {
               "type":"work"
             }, "text", "Example"],
             ["title", {}, "text", "Research Scientist"],
             ["role", {}, "text", "Project Lead"],
             ["adr",
               { "type":"work" },
               "text",
               [
                 "",
                 "Suite 1234",
                 "4321 Rue Somewhere",
                 "Quebec",
                 "QC",
                 "G1V 2M2",
                 "Canada"
               ]
             ],
             ["tel",
               { "type":["work", "voice"], "pref":"1" },
               "uri", "tel:+1-555-555-1234;ext=102"
             ],
             ["email",
               { "type":"work" },
               "text", "joe.user@example.com"
             ]
           ]
         ],
         "roles" : [ "registrant" ],
         "remarks" :
         [
           {
             "description" :
             [
               "She sells sea shells down by the sea shore.",
               "Originally written by Terry Sullivan."
             ]
           }
         ],
         "links" :
         [
           {
             "value": "http://example.net/entity/xxxx",
             "rel" : "self",
             "href" : "http://example.net/entity/xxxx",
             "type" : "application/rdap+json"
           }
         ],
         "events" :
         [
           {
             "eventAction" : "registration",
             "eventDate" : "1990-12-31T23:59:59Z"
           },
           {
             "eventAction" : "last changed",
             "eventDate" : "1991-12-31T23:59:59Z",
             "eventActor" : "joe@example.com"
           }
         ]
       }
     ],
     "network" :
     {
       "objectClassName" : "ip network",
       "handle" : "XXXX-RIR",
       "startAddress" : "192.0.2.0",
       "endAddress" : "192.0.2.255",
       "ipVersion" : "v6",
       "name": "NET-RTR-1",
       "type" : "DIRECT ALLOCATION",
       "country" : "AU",
       "parentHandle" : "YYYY-RIR",
       "status" : [ "active" ]
     }
   }

                                 Figure 23

   The following is an example of a JSON domain object representing a
   forward DNS delegation point that might be served by a DNR.

   {
     "objectClassName" : "domain",
     "handle" : "XXXX",
     "ldhName" : "xn--fo-5ja.example",
     "unicodeName" : "foo.example",
     "variants" :
     [
       {
         "relation" : [ "registered", "conjoined" ],
         "variantNames" :
         [
           {
             "ldhName" : "xn--fo-cka.example",
             "unicodeName" : "foo.example"
           },
           {
             "ldhName" : "xn--fo-fka.example",
             "unicodeName" : "foeo.example" "foo.example"
           }
         ]
       },
       {
         "relation" : [ "unregistered", "registration restricted" ],
         "idnTable": ".EXAMPLE Swedish",
         "variantNames" :
         [
           {
             "ldhName": "xn--fo-8ja.example",
             "unicodeName" : "foo.example"
           }
         ]
       }
     ],
     "status" : [ "locked", "transfer prohibited" ],
     "publicIds":[
       {
         "type":"ENS_Auth ID",
         "identifier":"1234567890"
       }
     ],
     "nameservers" :
     [
       {
         "objectClassName" : "nameserver",
         "handle" : "XXXX",
         "ldhName" : "ns1.example.com",
         "status" : [ "active" ],
         "ipAddresses" :
         {
           "v6": [ "2001:db8::123", "2001:db8::124" ],
           "v4": [ "192.0.2.1", "192.0.2.2" ]
         },
         "remarks" :
         [
           {
             "description" :
             [
               "She sells sea shells down by the sea shore.",
               "Originally written by Terry Sullivan."
             ]
           }
         ],
         "links" :
         [
           {
             "value" : "http://example.net/nameserver/XXXX",
             "rel" : "self",
             "href" : "http://example.net/nameserver/XXXX",
             "type" : "application/rdap+json"
           }
         ],
         "events" :
         [
           {
             "eventAction" : "registration",
             "eventDate" : "1990-12-31T23:59:59Z"
           },
           {
             "eventAction" : "last changed",
             "eventDate" : "1991-12-31T23:59:59Z"
           }
         ]
       },
       {
         "objectClassName" : "nameserver",
         "handle" : "XXXX",
         "ldhName" : "ns2.example.com",
         "status" : [ "active" ],
         "ipAddresses" :
         {
           "v6" : [ "2001:db8::125", "2001:db8::126" ],
           "v4" : [ "192.0.2.3", "192.0.2.4" ]
         },
         "remarks" :
         [
           {
             "description" :
             [
               "She sells sea shells down by the sea shore.",
               "Originally written by Terry Sullivan."
             ]
           }
         ],
         "links" :
         [
           {
             "value" : "http://example.net/nameserver/XXXX",
             "rel" : "self",
             "href" : "http://example.net/nameserver/XXXX",
             "type" : "application/rdap+json"
           }
         ],
         "events" :
         [
           {
             "eventAction" : "registration",
             "eventDate" : "1990-12-31T23:59:59Z"
           },
           {
             "eventAction" : "last changed",
             "eventDate" : "1991-12-31T23:59:59Z"
           }
         ]
       }
     ],
     "secureDNS":
     {
        "zoneSigned": true,
        "delegationSigned": true,
        "maxSigLife": 604800,
        "keyData":
        [
          {
            "flags": 257,
            "protocol": 3,
            "algorithm": 1,
            "publicKey": "AQPJ////4Q==",
            "events":
            [
              {
                "eventAction": "last changed",
                "eventDate": "2012-07-23T05:15:47Z"
              }
            ]
          }
        ]
     },
     "remarks" :
     [
       {
         "description" :
         [
           "She sells sea shells down by the sea shore.",
           "Originally written by Terry Sullivan."
         ]
       }
     ],
     "links" :
     [
       {
         "value": "http://example.net/domain/XXXX",
         "rel" : "self",
         "href" : "http://example.net/domain/XXXX",
         "type" : "application/rdap+json"
       }
     ],
     "port43" : "whois.example.net",
     "events" :
     [
       {
         "eventAction" : "registration",
         "eventDate" : "1990-12-31T23:59:59Z"
       },
       {
         "eventAction" : "last changed",
         "eventDate" : "1991-12-31T23:59:59Z",
         "eventActor" : "joe@example.com"
       },
       {
         "eventAction" : "transfer",
         "eventDate" : "1991-12-31T23:59:59Z",
         "eventActor" : "joe@example.com"
       },
       {
         "eventAction" : "expiration",
         "eventDate" : "2016-12-31T23:59:59Z",
         "eventActor" : "joe@example.com"
       }
     ],
     "entities" :
     [
       {
         "objectClassName" : "entity",
         "handle" : "XXXX",
         "vcardArray":[
           "vcard",
           [
             ["version", {}, "text", "4.0"],
             ["fn", {}, "text", "Joe User"],
             ["kind", {}, "text", "individual"],
             ["lang", {
               "pref":"1"
             }, "language-tag", "fr"],
             ["lang", {
               "pref":"2"
             }, "language-tag", "en"],
             ["org", {
               "type":"work"
             }, "text", "Example"],
             ["title", {}, "text", "Research Scientist"],
             ["role", {}, "text", "Project Lead"],
             ["adr",
               { "type":"work" },
               "text",
               [
                 "",
                 "Suite 1234",
                 "4321 Rue Somewhere",
                 "Quebec",
                 "QC",
                 "G1V 2M2",
                 "Canada"
               ]
             ],
             ["tel",
               { "type":["work", "voice"], "pref":"1" },
               "uri", "tel:+1-555-555-1234;ext=102"
             ],
             ["email",
               { "type":"work" },
               "text", "joe.user@example.com"
             ]
           ]
         ],
         "status" : [ "validated", "locked" ],
         "roles" : [ "registrant" ],
         "remarks" :
         [
           {
             "description" :
             [
               "She sells sea shells down by the sea shore.",
               "Originally written by Terry Sullivan."
             ]
           }
         ],
         "links" :
         [
           {
             "value" : "http://example.net/entity/xxxx",
             "rel" : "self",
             "href" : "http://example.net/entity/xxxx",
             "type" : "application/rdap+json"
           }
         ],
         "events" :
         [
           {
             "eventAction" : "registration",
             "eventDate" : "1990-12-31T23:59:59Z"
           },
           {
             "eventAction" : "last changed",
             "eventDate" : "1991-12-31T23:59:59Z"
           }
         ]
       }
     ]
   }
                                 Figure 24

5.4.  The IP Network Object Class

   The IP network object class models IP network registrations found in
   RIRs and is the expected response for the "/ip" query as defined by
   [I-D.ietf-weirds-rdap-query].
   [RFC7482].  There is no equivalent object class for DNRs.  The high high-
   level structure of the IP network object class consists of
   information about the network registration and entities related to
   the IP network (e.g. (e.g., registrant information, contacts,
   etc...). etc.).

   The following is an elided example of the IP network object type
   showing the high level high-level structure:

   {
     "objectClassName" : "ip network",
     "handle" : "XXX",
     ...
     "entities" :
     [
       ...
     ]
   }

                                 Figure 25

   The following is an example of the JSON object for the network
   registration information.

   {
     "objectClassName" : "ip network",
     "handle" : "XXXX-RIR",
     "startAddress" : "2001:db8::0", "2001:db8::",
     "endAddress" : "2001:db8:0:FFFF:FFFF:FFFF:FFFF:FFFF", "2001:db8:0:ffff:ffff:ffff:ffff:ffff",
     "ipVersion" : "v6",
     "name": "NET-RTR-1",
     "type" : "DIRECT ALLOCATION",
     "country" : "AU",
     "parentHandle" : "YYYY-RIR",
     "status" : [ "active" ],
     "remarks" :
     [
       {
         "description" :
         [
           "She sells sea shells down by the sea shore.",
           "Originally written by Terry Sullivan."
         ]
       }
     ],
     "links" :
     [
       {
         "value" : "http://example.net/ip/2001:db8::/48",
         "rel" : "self",
         "href" : "http://example.net/ip/2001:db8::/48",
         "type" : "application/rdap+json"
       },
       {
         "value" : "http://example.net/ip/2001:db8::/48",
         "rel" : "up",
         "href" : "http://example.net/ip/2001:C00::/23",
         "type" : "application/rdap+json"
       }
     ],
     "events" :
     [
       {
         "eventAction" : "registration",
         "eventDate" : "1990-12-31T23:59:59Z"
       },
       {
         "eventAction" : "last changed",
         "eventDate" : "1991-12-31T23:59:59Z"
       }
     ],
     "entities" :
     [
       {
         "objectClassName" : "entity",
         "handle" : "XXXX",
         "vcardArray":[
           "vcard",
           [
             ["version", {}, "text", "4.0"],
             ["fn", {}, "text", "Joe User"],
             ["kind", {}, "text", "individual"],
             ["lang", {
               "pref":"1"
             }, "language-tag", "fr"],
             ["lang", {
               "pref":"2"
             }, "language-tag", "en"],
             ["org", {
               "type":"work"
             }, "text", "Example"],
             ["title", {}, "text", "Research Scientist"],
             ["role", {}, "text", "Project Lead"],
             ["adr",
               { "type":"work" },
               "text",
               [
                 "",
                 "Suite 1234",
                 "4321 Rue Somewhere",
                 "Quebec",
                 "QC",
                 "G1V 2M2",
                 "Canada"
               ]
             ],
             ["tel",
               { "type":["work", "voice"], "pref":"1" },
               "uri", "tel:+1-555-555-1234;ext=102"
             ],
             ["email",
               { "type":"work" },
               "text", "joe.user@example.com"
             ]
           ]
         ],
         "roles" : [ "registrant" ],
         "remarks" :
         [
           {
             "description" :
             [
               "She sells sea shells down by the sea shore.",
               "Originally written by Terry Sullivan."
             ]
           }
         ],
         "links" :
         [
           {
             "value" : "http://example.net/entity/xxxx",
             "rel" : "self",
             "href" : "http://example.net/entity/xxxx",
             "type" : "application/rdap+json"
           }
         ],
         "events" :
         [
           {
             "eventAction" : "registration",
             "eventDate" : "1990-12-31T23:59:59Z"
           },
           {
             "eventAction" : "last changed",
             "eventDate" : "1991-12-31T23:59:59Z"
           }
         ]
       }
     ]
   }

                                 Figure 26

   The IP network object class can contain the following members:

   o  objectClassName -- the string "ip network"

   o  handle -- a string representing an RIR unique RIR-unique identifier of the
      network registration

   o  startAddress -- the starting IP address of the network, either
      IPv4 or IPv6

   o  endAddress -- the ending IP address of the network, either IPv4 or
      IPv6

   o  ipVersion -- a string signifying the IP protocol version of the
      network: "v4" signifying signifies an IPv4 network, and "v6" signifying signifies an
      IPv6 network

   o  name -- an identifier assigned to the network registration by the
      registration holder

   o  type -- a string containing an RIR-specific classification of the
      network

   o  country -- a string containing the two-character country code of
      the network

   o  parentHandle -- a string containing an RIR-unique identifier of
      the parent network of this network registration
   o  status -- an array of strings indicating the state of the IP
      network

   o  entities -- an array of entity objects as defined by Section 5.1. 5.1

   o  remarks - -- see Section 4.3

   o  links - -- see Section 4.2

   o  port43 - -- see Section 4.7

   o  events - -- see Section 4.5

5.5.  Autonomous System Number Entity Object Class

   The autonomous system Autonomous System number (autnum) object class models Autonomous
   System Number number registrations found in RIRs and represents the expected
   response to an "/autnum" query as defined by
   [I-D.ietf-weirds-rdap-query]. [RFC7482].  There is no
   equivalent object class for DNRs.  The high level high-level structure of the
   autnum object class consists of information about the network
   registration and entities related to the autnum registration (e.g. (e.g.,
   registrant information, contacts, etc.), etc.) and is similar to the IP Network
   network entity object class.

   The following is an example of a JSON object representing an autnum.

   {
     "objectClassName" : "autnum",
     "handle" : "XXXX-RIR",
     "startAutnum" : 10,
     "endAutnum" : 15,
     "name": "AS-RTR-1",
     "type" : "DIRECT ALLOCATION",
     "status" : [ "active" ],
     "country": "AU",
     "remarks" :
     [
       {
         "description" :
         [
           "She sells sea shells down by the sea shore.",
           "Originally written by Terry Sullivan."
         ]
       }
     ],
     "links" :
     [
       {
         "value" : "http://example.net/autnum/xxxx",
         "rel" : "self",
         "href" : "http://example.net/autnum/xxxx",
         "type" : "application/rdap+json"
       }
     ],
     "events" :
     [
       {
         "eventAction" : "registration",
         "eventDate" : "1990-12-31T23:59:59Z"
       },
       {
         "eventAction" : "last changed",
         "eventDate" : "1991-12-31T23:59:59Z"
       }
     ],
     "entities" :
     [
       {
         "objectClassName" : "entity",
         "handle" : "XXXX",
         "vcardArray":[
           "vcard",
           [
             ["version", {}, "text", "4.0"],
             ["fn", {}, "text", "Joe User"],
             ["kind", {}, "text", "individual"],
             ["lang", {
               "pref":"1"
             }, "language-tag", "fr"],
             ["lang", {
               "pref":"2"
             }, "language-tag", "en"],
             ["org", {
               "type":"work"
             }, "text", "Example"],
             ["title", {}, "text", "Research Scientist"],
             ["role", {}, "text", "Project Lead"],
             ["adr",
               { "type":"work" },
               "text",
               [
                 "",
                 "Suite 1234",
                 "4321 Rue Somewhere",
                 "Quebec",
                 "QC",
                 "G1V 2M2",
                 "Canada"
               ]
             ],
             ["tel",
               { "type":["work", "voice"], "pref":"1" },
               "uri", "tel:+1-555-555-1234;ext=102"
             ],
             ["email",
               { "type":"work" },
               "text", "joe.user@example.com"
             ]
           ]
         ],
         "roles" : [ "registrant" ],
         "remarks" :
         [
           {
             "description" :
             [
               "She sells sea shells down by the sea shore.",
               "Originally written by Terry Sullivan."
             ]
           }
         ],
         "links" :
         [
           {
             "value" : "http://example.net/entity/XXXX",
             "rel" : "self",
             "href" : "http://example.net/entity/XXXX",
             "type" : "application/rdap+json"
           }
         ],
         "events" :
         [
           {
             "eventAction" : "registration",
             "eventDate" : "1990-12-31T23:59:59Z"
           },
           {
             "eventAction" : "last changed",
             "eventDate" : "1991-12-31T23:59:59Z"
           }
         ]
       }
     ]
   }

                                 Figure 27

   The autonomous system Autonomous System number object class can contain the following
   members:

   o  objectClassName -- the string "autnum"

   o  handle -- a string representing an RIR-unique identifier of the
      autnum registration

   o  startAutnum -- a number representing the starting number [RFC5396]
      in the block of autonomous system Autonomous System numbers

   o  endAutnum -- a number representing the ending number [RFC5396] in
      the block of autonomous system Autonomous System numbers

   o  name -- an identifier assigned to the autnum registration by the
      registration holder

   o  type -- a string containing an RIR-specific classification of the
      autnum

   o  status -- an array of strings indicating the state of the autnum

   o  country -- a string containing the name of the 2 character two-character
      country code of the autnum

   o  entities -- an array of entity objects as defined by Section 5.1. 5.1

   o  remarks - -- see Section 4.3

   o  links - -- see Section 4.2

   o  port43 - -- see Section 4.7

   o  events - -- see Section 4.5

6.  Error Response Body

   Some non-answer responses may return entity bodies with information
   that could be more descriptive.

   The basic structure of that response is an object class containing an
   error code number (corresponding to the HTTP response code) followed
   by a string named "title" and an array of strings named
   "description".

   This is an example of the common response body.

   {
     "errorCode": 418,
     "title": "Your beverage choice Beverage Choice is not available", Not Available",
     "description":
     [
       "I know coffee has more ummppphhh.",
       "Sorry, dude!"
     ]
   }

                                 Figure 28
   This is an example of the common response body with and an
   rdapConformance and notices data structures:

   {
     "rdapConformance" :
     [
       "rdap_level_0"
     ],
     "notices" :
     [
       {
         "title" : "Beverage policy", Policy",
         "description" :
         [
           "Beverages with caffeine for keeping horses awake."
         ],
         "links" :
         [
           {
             "value" : "http://example.net/ip/192.0.2.0/24",
             "rel" : "alternate",
             "type" : "text/html",
             "href" : "http://www.example.com/redaction_policy.html"
           }
         ]
       }
     ],
     "lang" : "en",
     "errorCode": 418,
     "title": "Your beverage choice is not available",
     "description":
     [
       "I know coffee has more ummppphhh.",
       "Sorry, dude!"
     ]
   }

                                 Figure 29

7.  Responding to Help Queries

   The appropriate response to /help queries as defined by
   [I-D.ietf-weirds-rdap-query] [RFC7482] is
   to use the notices structure as defined in Section 4.3.

   This is an example of a response to a /help query including the
   rdapConformance data structure.

   {
     "rdapConformance" :
     [
       "rdap_level_0"
     ],
     "notices" :
     [
       {
         "title" : "Authentication Policy",
         "description" :
         [
           "Access to sensitive data for users with proper credentials."
         ],
         "links" :
         [
           {
             "value" : "http://example.net/help",
             "rel" : "alternate",
             "type" : "text/html",
             "href" : "http://www.example.com/auth_policy.html"
           }
         ]
       }
     ]
   }

                                 Figure 30

8.  Responding To Searches

   [I-D.ietf-weirds-rdap-query]

   [RFC7482] specifies three types of searches: domains, nameservers,
   and entities.  Responses to these searches take the form of an array
   of object instances where each instance is an appropriate object
   class for the search (i.e. (i.e., a search for /domains yields an array of
   domain object instances).  These arrays are contained within the
   response object.

   The names of the arrays are as follows:

   o  for /domains searches, the array is "domainSearchResults"

   o  for /nameservers searches, the array is "nameserverSearchResults"

   o  for /entities searches, the array is "entitySearchResults"
   The following is an elided example of a response to a /domains
   search.

   {
     "rdapConformance" :
     [
       "rdap_level_0"
     ],
     ...
     "domainSearchResults" :
     [
       {
         "objectClassName" : "domain",
         "handle" : "1-XXXX",
         "ldhName" : "1.example.com",
         ...
       },
       {
         "objectClassName" : "domain",
         "handle" : "2-XXXX",
         "ldhName" : "2.example.com",
         ...
       }
     ]
   }

                          search_response_example

                                 Figure 31

9.  Indicating Truncated Responses

   In cases where the data of a response needs to be limited or parts of
   the data need to be omitted, the response is considered "truncated".
   A truncated response is still valid JSON, but some of the results in
   a search set or some of the data in an object are not provided by the
   server.  A server may indicate this by including a typed notice in
   the response object.

   The following is an elided example of a search response that has been
   truncated.

   {
     "rdapConformance" :
     [
       "rdap_level_0"
     ],
     "notices" :
     [
       {
         "title" : "Search Policy",
         "type" : "result set truncated due to authorization",
         "description" :
         [
           "Search results are limited to 25 per day per querying IP."
         ],
         "links" :
         [
           {
             "value" : "http://example.net/help",
             "rel" : "alternate",
             "type" : "text/html",
             "href" : "http://www.example.com/search_policy.html"
           }
         ]
       }
     ],
     "domainSearchResults" :
     [
       ...
     ]
   }

                     search_response_truncated_example

                                 Figure 32

   A similar technique can be used with a typed remark where a single
   object has been returned and data in that object has been truncated.
   Such an example might be an entity object with only a partial set of
   the IP networks associated with it.

   The following is an elided example of an entity truncated data.

   {
     "objectClassName" : "entity",
     "handle" : "ANENTITY",
     "roles" : [ "registrant" ],
     ...
     "entities" :
     [
       {
         "objectClassName" : "entity",
         "handle": "ANEMBEDDEDENTITY",
         "roles" : [ "technical" ],
         ...
       },
       ...
     ],
     "networks" :
     [
       ...
     ],
     ...
     "remarks" :
     [
       {
         "title" : "Data Policy",
         "type" : "object truncated due to unexplainable reason",
         "description" :
         [
           "Some of the data in this object has been removed."
         ],
         "links" :
         [
           {
             "value" : "http://example.net/help",
             "rel" : "alternate",
             "type" : "text/html",
             "href" : "http://www.example.com/data_policy.html"
           }
         ]
       }
     ]
   }

                                 Figure 31 33

10.  IANA Considerations

10.1.  RDAP JSON Media Type Registration

   This specification registers the "application/rdap+json" media type.

      Type name: application

      Subtype name: rdap+json

      Required parameters: n/a

      Encoding considerations: See section Section 3.1 of [RFC6839].

      Security considerations: The media represented by this identifier
      does not have security considerations beyond that found in section
      Section 6 of [RFC7159] [RFC7159].

      Interoperability considerations: There are no known
      interoperability problems regarding this media format.

      Published specification: [[ this document ]] RFC 7483

      Applications that use this media type: Implementations of the
      Registration Data Access Protocol (RDAP) (RDAP).

      Additional information: This media type is a product of the IETF
      WEIRDS working group.  The WEIRDS charter, information on the
      WEIRDS mailing list, and other documents produced by the WEIRDS
      working group can be found at https://datatracker.ietf.org/wg/
      weirds/
      <https://datatracker.ietf.org/wg/weirds/>.

      Person & email address to contact for further information: IESG
      <iesg@ietf.org>

      Intended usage: COMMON

      Restrictions on usage: none

      Author: Andy Newton

      Change controller: IETF

      Provisional Registration: No (upon publication of this RFC)

10.2.  JSON Values Registry

   This section requests that the

   IANA create has created a new category in the protocol registries labeled
   "Registration Data Access Protocol
   (RDAP)" (if it does not already exist), (RDAP)", and within that category
   establish category,
   IANA has established a URL referenceable, URL-referenceable, stand-alone registry
   labeled "RDAP JSON Values".  This new registry is for use in the
   notices and remarks (Section 4.3), status (Section 4.6), role
   (Section 5.1), event action (Section 4.5), and domain variant
   relation (Section 5.3) fields specified in RDAP.

   Each entry in the registry should contain contains the following fields:

   1.  Value - -- the string value being registered.

   2.  Type - -- the type of value being registered.  It should be one of
       the following:

       *  'notice  "notice or remark type' - type" -- denotes a type of notice or remark remark.

       *  'status' -  "status" -- denotes a value for the 'status' "status" object member as
          defined by Section 4.6.

       *  'role' -  "role" -- denotes a value for the 'role' "role" array as defined in
          Section 5.1.

       *  'event action' -  "event action" -- denotes a value for an event action as
          defined in Section 4.5.

       *  'domain  "domain variant relation' - relation" -- denotes a relationship between a
          domain and a domain variant as defined in Section 5.3.

   3.  Description - -- a one one- or two sentence two-sentence description regarding the
       meaning of the value, how it might be used, and/or how it should
       be interpreted by clients.

   4.  Registrant Name - -- the name of the person registering the value.

   5.  Registrant Contact Information - -- an email address, postal
       address, or some other information to be used to contact the
       registrant.

   This registry is to be operated under the "Expert Review" policy defined in
   [RFC5226].

   Review of registrations into this registry by the designated
   expert(s) should be narrowly judged on the following criteria:

   1.  Values in need of being placed into multiple types must be
       assigned a separate registration for each type.

   2.  Values must be strings.  They should be multiple words separated
       by single space characters.  Every character should be
       lowercased.  If possible, every word should be given in English
       and each character should be US ASCII. US-ASCII.

   3.  Registrations should not duplicate the meaning of any existing
       registration.  That is, if a request for a registration is
       significantly similar in nature to an existing registration, the
       request should be denied.  For example, the terms 'maintainer' "maintainer"
       and 'registrant' "registrant" are significantly similar in nature as they both
       denote a holder of a domain name or Internet number resource.  In
       cases where it may be reasonably argued that machine
       interpretation of two similar values may alter the operation of
       client software, designated experts should not judge the values
       to be of significant similarity.

   4.  Registrations should be relevant to the common usages of RDAP.
       Designated experts may rely upon the serving of the value by a
       DNR or RIR to make this determination.

   The following sections provide initial registrations into this
   registry.

10.2.1.  Notice and Remark Types

   This section registers the

   The following values into have been registered in the RDAP "RDAP JSON Values
   Registry: Values"
   registry:

   1.

       *  Value: result set truncated due to authorization

       *  Type: notice and remark type

       *  Description: The list of results does not contain all results
          due to lack of authorization.  This may indicate to some
          clients that proper authorization will yield a longer result
          set.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   2.

       *  Value: result set truncated due to excessive load

       *  Type: notice and remark type

       *  Description: The list of results does not contain all results
          due to an excessively heavy load on the server.  This may
          indicate to some clients that requerying at a later time will
          yield a longer result set.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   3.

       *  Value: result set truncated due to unexplainable reasons

       *  Type: notice and remark type

       *  Description: The list of results does not contain all results
          for an unexplainable reason.  This may indicate to some
          clients that requerying for any reason will not yield a longer
          result set.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   4.

       *  Value: object truncated due to authorization

       *  Type: notice and remark type

       *  Description: The object does not contain all data due to lack
          of authorization.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   5.

       *  Value: object truncated due to excessive load

       *  Type: notice and remark type
       *  Description: The object does not contain all data due to an
          excessively heavy load on the server.  This may indicate to
          some clients that requerying at a later time will yield all
          data of the object.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   6.

       *  Value: object truncated due to unexplainable reasons

       *  Type: notice and remark type

       *  Description: The object does not contain all data for an
          unexplainable reason.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

10.2.2.  Status

   This section registers the

   The following values into have been registered in the RDAP "RDAP JSON Values
   Registry: Values"
   registry:

   1.

        *  Value: validated

        *  Type: status

        *  Description: Signifies that the data of the object instance
           has been found to be accurate.  This type of status is
           usually found on entity object instances to note the validity
           of identifying contact information.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   2.

        *  Value: renew prohibited

        *  Type: status
        *  Description: Renewal or reregistration of the object instance
           is forbidden.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   3.

        *  Value: update prohibited

        *  Type: status

        *  Description: Updates to the object instance are forbidden.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   4.

        *  Value: transfer prohibited

        *  Type: status

        *  Description: Transfers of the registration from one registrar
           to another are forbidden.  This type of status normally
           applies to DNR domain names.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   5.

        *  Value: delete prohibited

        *  Type: status

        *  Description: Deletion of the registration of the object
           instance is forbidden.  This type of status normally applies
           to DNR domain names.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   6.

        *  Value: proxy

        *  Type: status

        *  Description: The registration of the object instance has been
           performed by a third party.  This is most commonly applied to
           entities.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   7.

        *  Value: private

        *  Type: status

        *  Description: The information of the object instance is not
           designated for public consumption.  This is most commonly
           applied to entities.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   8.

        *  Value: removed

        *  Type: status

        *  Description: Some of the information of the object instance
           has not been made available and has been removed.  This is
           most commonly applied to entities.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   9.

        *  Value: obscured

        *  Type: status

        *  Description: Some of the information of the object instance
           has been altered for the purposes of not readily revealing
           the actual information of the object instance.  This is most
           commonly applied to entities.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   10.

        *  Value: associated

        *  Type: status

        *  Description: The object instance is associated with other
           object instances in the registry.  This is most commonly used
           to signify that a nameserver is associated with a domain or
           that an entity is associated with a network resource or
           domain.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   11.

        *  Value: active

        *  Type: status

        *  Description: The object instance is in use.  For domain
           names, it signifies that the domain name is published in DNS.
           For network and autnum registrations registrations, it signifies that they
           are allocated or assigned for use in operational networks.
           This maps to the "OK" status of the Extensible Provisioning
           Protocol (EPP) [RFC5730] 'OK' status. .

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   12.

        *  Value: inactive

        *  Type: status

        *  Description: The object instance is not in use.  See
           'active'.
           "active".

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   13.

        *  Value: locked

        *  Type: status

        *  Description: Changes to the object instance cannot be made,
           including the association of other object instances.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   14.

        *  Value: pending create

        *  Type: status

        *  Description: A request has been received for the creation of
           the object instance instance, but this action is not yet complete.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   15.

        *  Value: pending renew

        *  Type: status

        *  Description: A request has been received for the renewal of
           the object instance instance, but this action is not yet complete.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   16.

        *  Value: pending transfer

        *  Type: status
        *  Description: A request has been received for the transfer of
           the object instance instance, but this action is not yet complete.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   17.

        *  Value: pending update

        *  Type: status

        *  Description: A request has been received for the update or
           modification of the object instance instance, but this action is not
           yet complete.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   18.

        *  Value: pending delete

        *  Type: status

        *  Description: A request has been received for the deletion or
           removal of the object instance instance, but this action is not yet
           complete.  For domains, this might mean that the name is no
           longer published in DNS but has not yet been purged from the
           registry database.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

10.2.3.  Event Actions

   This section registers the

   The following values into have been registered in the RDAP "RDAP JSON Values
   Registry: Values"
   registry:

   1.

       *  Value: registration

       *  Type: event action
       *  Description: The object instance was initially registered.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   2.

       *  Value: reregistration

       *  Type: event action

       *  Description: The object instance was registered subsequently
          to initial registration.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   3.

       *  Value: last changed

       *  Type: event action

       *  Description: An action noting when the information in the
          object instance was last changed.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   4.

       *  Value: expiration

       *  Type: event action

       *  Description: The object instance has been removed or will be
          removed at a pre-determined predetermined date and time from the registry.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   5.

       *  Value: deletion
       *  Type: event action

       *  Description: The object instance was removed from the registry
          at a point in time that was not pre-determined. predetermined.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   6.

       *  Value: reinstantiation

       *  Type: event action

       *  Description: The object instance was reregistered after having
          been removed from the registry.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   7.

       *  Value: transfer

       *  Type: event action

       *  Description: The object instance was transferred from one
          registrant to another.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   8.

       *  Value: locked

       *  Type: event action

       *  Description: The object instance was locked (see the 'locked' "locked"
          status).

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org
   9.

       *  Value: unlocked

       *  Type: event action

       *  Description: The object instance was unlocked (see the
          'locked'
          "locked" status).

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

10.2.4.  Roles

   This section registers the

   The following values into have been registered in the RDAP "RDAP JSON Values
   Registry: Values"
   registry:

   1.

        *  Value: registrant

        *  Type: role

        *  Description: The entity object instance is the registrant of
           the registration.  In some registries, this is known as a
           maintainer.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   2.

        *  Value: technical

        *  Type: role

        *  Description: The entity object instance is a technical
           contact for the registration.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   3.

        *  Value: administrative
        *  Type: role

        *  Description: The entity object instance is an administrative
           contact for the registration.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   4.

        *  Value: abuse

        *  Type: role

        *  Description: The entity object instance handles network abuse
           issues on behalf of the registrant of the registration.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   5.

        *  Value: billing

        *  Type: role

        *  Description: The entity object instance handles payment and
           billing issues on behalf of the registrant of the
           registration.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   6.

        *  Value: registrar

        *  Type: role

        *  Description: The entity object instance represents the
           authority responsible for the registration in the registry.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org
   7.

        *  Value: reseller

        *  Type: role

        *  Description: The entity object instance represents a third
           party through which the registration was conducted (i.e. (i.e., not
           the registry or registrar).

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   8.

        *  Value: sponsor

        *  Type: role

        *  Description: The entity object instance represents a domain
           policy sponsor, such as an ICANN approved ICANN-approved sponsor.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   9.

        *  Value: proxy

        *  Type: role

        *  Description: The entity object instance represents a proxy
           for another entity object, such as a registrant.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   10.

        *  Value: notifications

        *  Type: role

        *  Description: An entity object instance designated to receive
           notifications about association object instances.

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

   11.

        *  Value: noc

        *  Type: role

        *  Description: The entity object instance handles
           communications related to a network operations center (NOC).

        *  Registrant Name: IESG

        *  Registrant Contact Information: iesg@ietf.org

10.2.5.  Variant Relations

   This section registers the

   The following values into have been registered in the RDAP "RDAP JSON Values
   Registry: Values"
   registry:

   1.

       *  Value: registered

       *  Type: domain variant relation

       *  Description: The variant names are registered in the registry.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   2.

       *  Value: unregistered

       *  Type: domain variant relation

       *  Description: The variant names are not found in the registry.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   3.

       *  Value: registration restricted

       *  Type: domain variant relation

       *  Description: Registration of the variant names is restricted
          to certain parties or within certain rules.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   4.

       *  Value: open registration

       *  Type: domain variant relation

       *  Description: Registration of the variant names is available to
          generally qualified registrants.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

   5.

       *  Value: conjoined

       *  Type: domain variant relation

       *  Description: Registration of the variant names occurs
          automatically with the registration of the containing domain
          registration.

       *  Registrant Name: IESG

       *  Registrant Contact Information: iesg@ietf.org

11.  Security Considerations

   This specification models information serialized in JSON format.  As
   JSON is a subset of Javascript, JavaScript, implementations are advised to follow
   the security considerations outlined in Section 6 of [RFC7159] to
   prevent code injection.

   Though not specific to JSON, RDAP implementers should be aware of the
   security considerations specified in [I-D.ietf-weirds-using-http] [RFC7480] and the security
   requirements and considerations in
   [I-D.ietf-weirds-rdap-sec]. [RFC7481].

   Clients caching data, especially clients using RDAP specific RDAP-specific caches
   (instead of HTTP layer HTTP-layer caches), should have safeguards to prevent
   cache poisoning.  See Section 5 for advice on using the "self" self links
   for caching.

   Finally, service operators should be aware of the privacy mechanisms
   noted in Section 13.

12.  Internationalization Considerations

12.1.  Character Encoding

   The default text encoding for JSON responses in RDAP is UTF-8
   [RFC3629], and all servers and clients MUST support UTF-8.

12.2.  URIs and IRIs

   [I-D.ietf-weirds-using-http]

   [RFC7480] defines the use of URIs and IRIs in RDAP.

12.3.  Language Tags

   Section 4.4 defines the use of language tags in the JSON responses
   defined in this document.

12.4.  Internationalized Domain Names

   Internationalized Domain Names (IDNs)

   IDNs are denoted in this specification by the separation of DNS names
   in LDH form and Unicode form (see Section 3).  Representation of IDNs
   in registries is described by the "variants" object in Section 5.3
   and the suggested values listed in Section 10.2.5.

13.  Privacy Considerations

   This specification suggests status values to denote contact and
   registrant information that has been marked as private and/or has
   been removed or obscured.  See Section 10.2.2 for the complete list
   of status values.  A few of the status values indicate that there are
   privacy concerns associated with the object instance.  The following
   status codes SHOULD be used to describe data elements of a response
   when appropriate:

      private - -- The object is not be shared in query responses, unless
      the user is authorized to view this information.

      removed - -- Data elements within the object have been collected, collected but
      have been omitted from the response.  This option can be used to
      prevent unauthorized access to associated object instances without
      the need to mark them as private.

      obscured - -- Data elements within the object have been collected,
      but the response value has been altered so that values are not
      easily discernible.  A value changed from "1212" to "XXXX" is an
      example of obscured data.  This option may reveal privacy
      sensitive information and should only be used when data
      sensitivity does not require a more protective option like
      "private" or "removed".

   See Appendix A.1 for an example of applying those values to contacts
   and registrants.

14.  Contributing Authors and Acknowledgements

   This document is derived from original work on RIR responses in JSON
   by Byron J.  Ellacott, Arturo L.  Servin, Kaveh Ranjbar, and Andrew
   L.  Newton.  Additionally, this document incorporates work on DNR
   responses in JSON by Ning Kong, Linlin Zhou, Jiagui Xie, and Sean
   Shen.

   The components of the DNR object classes are derived from a
   categorization of WHOIS response formats created by Ning Kong, Linlin
   Zhou, and Guangqing Deng, Steve Sheng and Francisco Arias, Ray
   Bellis, and Frederico Neves.

   Tom Harrison, Murray Kucherawy, Ed Lewis, Audric Schiltknecht, Naoki
   Kambe, and Maarten Bosteels contributed significant review comments
   and provided clarifying text.  James Mitchell provided text regarding
   the processing of unknown JSON attributes and identified issues
   leading to the remodeling of events.  Ernie Dainow and Francisco
   Obispo provided concrete suggestions that led to a better variant
   model  References

14.1.  Normative References

   [ISO.3166.1988]
              International Organization for domain names.

   Ernie Dainow provided the background information on the secure DNS
   attributes and objects Standardization, "Codes for domains, informative text on DNSSEC, and
   many other attributes that appear throughout
              the object classes representation of
   this draft.

   The switch to and incorporation names of jCard (JSON vCard) was performed
   by Simon Perreault.

   Olaf Kolkman and Murray Kucherawy chaired the IETF's WEIRDS working
   group from which this document as been created.

15.  References

15.1.  Normative References countries, 3rd edition",
              ISO Standard 3166, August 1988.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997. 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC3339]  Klyne, G., Ed. and C. Newman, "Date and Time on the
              Internet: Timestamps", RFC 3339, July 2002. 2002,
              <http://www.rfc-editor.org/info/rfc3339>.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, November 2003. 2003,
              <http://www.rfc-editor.org/info/rfc3629>.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66, RFC
              3986, January 2005. 2005,
              <http://www.rfc-editor.org/info/rfc3986>.

   [RFC4034]  Arends, R., Austein, R., Larson, M., Massey, D., and S.
              Rose, "Resource Records for the DNS Security Extensions",
              RFC 4034, March 2005. 2005,
              <http://www.rfc-editor.org/info/rfc4034>.

   [RFC5226]  Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 5226,
              May 2008. 2008, <http://www.rfc-editor.org/info/rfc5226>.

   [RFC5396]  Huston, G. and G. Michaelson, "Textual Representation of
              Autonomous System (AS) Numbers", RFC 5396, December 2008. 2008,
              <http://www.rfc-editor.org/info/rfc5396>.

   [RFC5646]  Phillips, A. and M. Davis, "Tags for Identifying
              Languages", BCP 47, RFC 5646, September 2009. 2009,
              <http://www.rfc-editor.org/info/rfc5646>.

   [RFC5890]  Klensin, J., "Internationalized Domain Names for
              Applications (IDNA): Definitions and Document Framework",
              RFC 5890, August 2010. 2010,
              <http://www.rfc-editor.org/info/rfc5890>.

   [RFC5952]  Kawamura, S. and M. Kawashima, "A Recommendation for IPv6
              Address Text Representation", RFC 5952, August 2010. 2010,
              <http://www.rfc-editor.org/info/rfc5952>.

   [RFC5988]  Nottingham, M., "Web Linking", RFC 5988, October 2010. 2010,
              <http://www.rfc-editor.org/info/rfc5988>.

   [RFC7095]  Kewisch, P., "jCard: The JSON Format for vCard", RFC 7095,
              January 2014. 2014, <http://www.rfc-editor.org/info/rfc7095>.

   [RFC7159]  Bray, T., "The JavaScript Object Notation (JSON) Data
              Interchange Format", RFC 7159, March 2014.

   [I-D.ietf-weirds-using-http] 2014,
              <http://www.rfc-editor.org/info/rfc7159>.

   [RFC7480]  Newton, A., Ellacott, B., and N. Kong, "HTTP usage Usage in the
              Registration Data Access Protocol (RDAP)", draft-ietf-
              weirds-using-http-15 (work in progress), November 2014.

   [I-D.ietf-weirds-rdap-query]
              Newton, A. and S. Hollenbeck, "Registration Data Access
              Protocol Query Format", draft-ietf-weirds-rdap-query-16
              (work in progress), October 2014.

   [I-D.ietf-weirds-rdap-sec] RFC 7480,
              February 2015, <http://www.rfc-editor.org/info/rfc7480>.

   [RFC7481]  Hollenbeck, S. and N. Kong, "Security Services for the
              Registration Data Access Protocol", draft-ietf-weirds-
              rdap-sec-11 (work in progress), November 2014.

   [ISO.3166.1988]
              International Organization for Standardization, "Codes for
              the representation of names of countries, 3rd edition",
              ISO Standard 3166, August 1988.

15.2. Protocol (RDAP)", RFC 7481,
              February 2015, <http://www.rfc-editor.org/info/rfc7481>.

   [RFC7482]  Newton, A. and S. Hollenbeck, "Registration Data Access
              Protocol (RDAP) Query Format", RFC 7482, February 2015,
              <http://www.rfc-editor.org/info/rfc7482>.

14.2.  Informative References

   [IANA_IDNTABLES]
              IANA, "Repository of IDN Practices",
              <http://www.iana.org/domains/idn-tables>.

   [JSON_ascendancy]
              MacVittie, L., "The Stealthy Ascendancy of JSON", April
              2011, <https://devcentral.f5.com/weblogs/macvittie/
              archive/2011/04/27/the-stealthy-ascendancy-of-json.aspx>.

   [JSON_performance_study]
              Nurseitov, N., Paulson, M., Reynolds, R., and C. Izurieta,
              "Comparison of JSON and XML Data Interchange Formats: A
              Case Study", 2009,
              <http://www.cs.montana.edu/izurieta/pubs/caine2009.pdf>.

   [RFC3912]  Daigle, L., "WHOIS Protocol Specification", RFC 3912,
              September 2004. 2004, <http://www.rfc-editor.org/info/rfc3912>.

   [RFC5730]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
              STD 69, RFC 5730, August 2009. 2009,
              <http://www.rfc-editor.org/info/rfc5730>.

   [RFC5910]  Gould, J. and S. Hollenbeck, "Domain Name System (DNS)
              Security Extensions Mapping for the Extensible
              Provisioning Protocol (EPP)", RFC 5910, May 2010. 2010,
              <http://www.rfc-editor.org/info/rfc5910>.

   [RFC6350]  Perreault, S., "vCard Format Specification", RFC 6350,
              August 2011. 2011, <http://www.rfc-editor.org/info/rfc6350>.

   [RFC6839]  Hansen, T. and A. Melnikov, "Additional Media Type
              Structured Syntax Suffixes", RFC 6839, January 2013.

   [JSON_acendancy]
              MacVittie, , "The Stealthy Ascendancy of JSON", 04 2011.

   [IANA_IDNTABLES]
              "IANA IDN Tables",
              <http://www.iana.org/domains/idn-tables>.

   [JSON_performance_study]
              Montana State University - Bozeman, Montana State
              University - Bozeman, Montana State University - Bozeman,
              and Montana State University - Bozeman, "Comparison of
              JSON and XML Data Interchange Formats: A Case Study",
              2009. 2013,
              <http://www.rfc-editor.org/info/rfc6839>.

Appendix A.  Suggested Data Modeling with the Entity Object Class

A.1.  Registrants and Contacts

   This document does not provide specific object classes for
   registrants and contacts.  Instead  Instead, the entity object class may be
   used to represent a registrant or contact.  When the entity object is
   embedded inside a containing object such as a domain name or IP
   network, the 'roles' "roles" string array can be used to signify the
   relationship.  It is recommended that the values from Section 10.2.4
   be used.

   The following is an example of an elided containing object with an
   embedded entity that is both a registrant and administrative contact:

   {
     ...
     "entities" :
     [
       {
         "objectClassName" : "entity",
         "handle" : "XXXX",
         "vcardArray":[
           "vcard",
           [
             ["version", {}, "text", "4.0"],
             ["fn", {}, "text", "Joe User"],
             ["kind", {}, "text", "individual"],
             ["lang", {
               "pref":"1"
             }, "language-tag", "fr"],
             ["lang", {
               "pref":"2"
             }, "language-tag", "en"],
             ["org", {
               "type":"work"
             }, "text", "Example"],
             ["title", {}, "text", "Research Scientist"],
             ["role", {}, "text", "Project Lead"],
             ["adr",
               { "type":"work" },
               "text",
               [
                 "",
                 "Suite 1234",
                 "4321 Rue Somewhere",
                 "Quebec",
                 "QC",
                 "G1V 2M2",
                 "Canada"
               ]
             ],
             ["tel",
               { "type":["work", "voice"], "pref":"1" },
               "uri", "tel:+1-555-555-1234;ext=102"
             ],
             ["email",
               { "type":"work" },
               "text", "joe.user@example.com"
             ]
           ]
         ],
         "roles" : [ "registrant", "administrative" ],
         "remarks" :
         [
           {
             "description" :
             [
               "She sells sea shells down by the sea shore.",
               "Originally written by Terry Sullivan."
             ]
           }
         ],
         "events" :
         [
           {
             "eventAction" : "registration",
             "eventDate" : "1990-12-31T23:59:59Z"
           },
           {
             "eventAction" : "last changed",
             "eventDate" : "1991-12-31T23:59:59Z"
           }
         ]
       }
     ]
   }

                                 Figure 32 34

   In many use cases, it is necessary to hide or obscure the information
   of a registrant or contact due to policy or other operational
   matters.  Registries can denote these situations with 'status' "status" values
   (see Section 10.2.2).

   The following is an elided example of a registrant with information
   changed to reflect that of a third party.

   {
     ...
     "entities" :
     [
       {
         "objectClassName" : "entity",
         "handle" : "XXXX",
         ...
         "roles" : [ "registrant", "administrative" ],
         "status" : [ "proxy", "private", "obscured" ]
       }
     ]
   }

                                 Figure 33 35

A.2.  Registrars

   This document does not provide a specific object class for
   registrars, but like registrants and contacts (see Appendix A.1) A.1), the
   'roles'
   "roles" string array maybe used.  Additionally, many registrars have
   publicly assigned identifiers.  The 'publicIds' publicIds structure (Section 4.8)
   represents that information.

   The following is an example of an elided containing object with an
   embedded entity that is a registrar:

   {
     ...
     "entities":[
       {
         "objectClassName" : "entity",
         "handle":"XXXX",
         "vcardArray":[
           "vcard",
           [
             ["version", {}, "text", "4.0"],
             ["fn", {}, "text", "Joe's Fish, Chips Chips, and Domains"],
             ["kind", {}, "text", "org"],
             ["lang", {
               "pref":"1"
             }, "language-tag", "fr"],
             ["lang", {
               "pref":"2"
             }, "language-tag", "en"],
             ["org", {
               "type":"work"
             }, "text", "Example"],
             ["adr",
               { "type":"work" },
               "text",
               [
                 "",
                 "Suite 1234",
                 "4321 Rue Somewhere",
                 "Quebec",
                 "QC",
                 "G1V 2M2",
                 "Canada"
               ]
             ],
             ["tel",
               {
                 "type":["work", "voice"],
                 "pref":"1"
               },
               "uri", "tel:+1-555-555-1234;ext=102"
             ],
             ["email",
               { "type":"work" },
               "text", "joes_fish_chips_and_domains@example.com"
             ]
           ]
         ],
         "roles":[ "registrar" ],
         "publicIds":[
           {
             "type":"IANA Registrar ID",
             "identifier":"1"
           }
         ],
         "remarks":[
           {
             "description":[
               "She sells sea shells down by the sea shore.",
               "Originally written by Terry Sullivan."
             ]
           }
         ],
         "links":[
           {
             "value":"http://example.net/entity/XXXX",
             "rel":"alternate",
             "type":"text/html",
             "href":"http://www.example.com"
           }
         ]
       }
     ]
   }

                                 Figure 34 36

Appendix B.  Modeling Events

   Events represent actions that have taken place against a registered
   object at a certain date and time.  Events have three properties: the
   action, the actor, and the date and time of the event (which is
   sometimes in the future).  In some cases cases, the identity of the actor
   is not captured.

   Events can be modeled in three ways:

   1.  events with no designated actor

   2.  events where the actor is only designated by an identifier

   3.  events where the actor can be modeled as an entity

   For the first use case, the 'events' events data structure (Section 4.5) is
   used without the 'eventActor' "eventActor" object member.

   This is an example of an "events" array without the 'eventActor'. "eventActor".

   "events" :
   [
     {
       "eventAction" : "registration",
       "eventDate" : "1990-12-31T23:59:59Z"
     }
   ]

                                 Figure 35 37

   For the second use case, the 'events' events data structure (Section 4.5) is
   used with the 'eventActor' "eventActor" object member.

   This is an example of an "events" array with the 'eventActor'. "eventActor".

   "events" :
   [
     {
       "eventAction" : "registration",
       "eventActor" : "XYZ-NIC",
       "eventDate" : "1990-12-31T23:59:59Z"
     }
   ]

                                 Figure 36 38

   For the third use case, the 'asEventActor' "asEventActor" array is used when an
   entity (Section 5.1) is embedded into another object class.  The
   'asEventActor'
   "asEventActor" array follows the same structure as the 'events' "events" array
   but does not have 'eventActor' "eventActor" attributes.

   The following is an elided example of a domain object with an entity
   as an event actor.

   {
     "objectClassName" : "domain",
     "handle" : "XXXX",
     "ldhName" : "foo.example",
     "status" : [ "locked", "transfer Prohibited" prohibited" ],
     ...
     "entities" :
     [
       {
         "handle" : "XXXX",
         ...
         "asEventActor" :
         [
           {
             "eventAction" : "last changed",
             "eventDate" : "1990-12-31T23:59:59Z"
           }
         ]
       }
     ]
   }

                                 Figure 37 39

Appendix C.  Structured vs vs. Unstructured Addresses

   The entity (Section 5.1) object class uses jCard [RFC7095] to
   represent contact information, including postal addresses. jCard has
   the ability to represent multiple language preferences, multiple
   email address and phone numbers, and multiple postal addresses in
   both a structured and unstructured format.  This section describes
   the use of jCard for representing structured and unstructured
   addresses.

   The following is an example of a jCard.

   {
     "vcardArray":[
       "vcard",
       [
         ["version", {}, "text", "4.0"],
         ["fn", {}, "text", "Joe User"],
         ["n", {}, "text",
           ["User", "Joe", "", "", ["ing. jr", "M.Sc."]]
         ],
         ["kind", {}, "text", "individual"],
         ["lang", {
           "pref":"1"
         }, "language-tag", "fr"],
         ["lang", {
           "pref":"2"
         }, "language-tag", "en"],
         ["org", {
           "type":"work"
         }, "text", "Example"],
         ["title", {}, "text", "Research Scientist"],
         ["role", {}, "text", "Project Lead"],
         ["adr",
           { "type":"work" },
           "text",
           [
             "",
             "Suite 1234",
             "4321 Rue Somewhere",
             "Quebec",
             "QC",
             "G1V 2M2",
             "Canada"
           ]
         ],
         ["adr",
           {
             "type":"home",
             "label":"123 Maple Ave\nSuite 90001\nVancouver\nBC\n1239\n"
           },
           "text",
           [
             "", "", "", "", "", "", ""
           ]
         ],
         ["tel",
           { "type":["work", "voice"], "pref":"1" },
           "uri", "tel:+1-555-555-1234;ext=102"
         ],
         ["tel",
           {
             "type":["work", "cell", "voice", "video", "text"]
           },
           "uri",
           "tel:+1-555-555-1234"
         ],
         ["email",
           { "type":"work" },
           "text", "joe.user@example.com"
         ],
         ["geo", {
           "type":"work"
         }, "uri", "geo:46.772673,-71.282945"],
         ["key",
           { "type":"work" },
           "uri", "http://www.example.com/joe.user/joe.asc"
         ],
         ["tz", {},
           "utc-offset", "-05:00"],
         ["url", { "type":"home" },
           "uri", "http://example.org"]
       ]
     ]
   }

                                 Figure 38 40

   The arrays in Figure 38 40 with the first member of "adr" represent
   postal addresses.  In the first example, the postal address is given
   as a an array of strings and constitutes a structured address.  For
   components of the structured address that are not applicable, an
   empty string is given.  Each member of that array aligns with the
   positions of a vCard as given in [RFC6350].  In this example, the
   following data corresponds to the following positional meanings:

   1.  post office box - -- not applicable, applicable; empty string

   2.  extended address (e.g., apartment or suite number) - -- Suite 1234

   3.  street address - -- 4321 Rue Somewhere

   4.  locality (e.g., city) - -- Quebec

   5.  region (e.g., state or province) - -- QC

   6.  postal code - -- G1V 2M2

   7.  country name (full name) - -- Canada

   The second example is an unstructured address.  It uses the label
   attribute, which is a string containing a newline (\n) character to
   separate address components in an unordered, unspecified manner.
   Note that in this example example, the structured address array is still
   given but that each string is an empty string.

Appendix D.  Secure DNS

   Section 5.3 defines the "secureDNS" member to represent secure DNS
   information about domain names.

   DNSSEC provides data integrity for DNS through the digital signing of
   resource records.  To enable DNSSEC, the zone is signed by one or
   more private keys and the signatures are stored as RRSIG records.  To
   complete the chain of trust in the DNS zone hierarchy, a digest of
   each DNSKEY record (which contains the public key) must be loaded
   into the parent zone, stored as Delegation Signer (DS) records DS records, and signed by the
   parent's private key (RRSIG DS record), as indicated in "Resource
   Records for the DNS Security Extensions" [RFC4034].  Creating the DS
   records in the parent zone can be done by the registration authority, authority
   "Domain Name System (DNS) Security Extensions Mapping for the
   Extensible Provisioning Protocol (EPP)" [RFC5910].

   Only DS related DS-related information is provided by RDAP, since other
   information is not generally stored in the registration database.
   Other DNSSEC related DNSSEC-related information can be retrieved with other DNS
   tools such as dig.

   The domain object class (Section 5.3) can represent this information
   using either the 'dsData' "dsData" or 'keyData' "keyData" object arrays.  Client
   implementers should be aware that some registries do not collect or
   do not publish all of the secure DNS meta-information.

Appendix E.  Motivations for Using JSON

   This section addresses a common question regarding the use of JSON
   over other data formats, most notably XML.

   It is often pointed out that many DNRs and one RIR support the EPP
   [RFC5730] standard, which is an XML serialized protocol.  The logic
   is that since EPP is a common protocol in the industry industry, it follows
   that XML would be a more natural choice.  While EPP does influence
   this specification quite a bit, EPP serves a different purpose purpose, which
   is the provisioning of Internet resources between registries and
   accredited registrars and serves serving a much narrower audience than that
   envisioned for RDAP.

   By contrast, RDAP has a broader audience and is designed for public
   consumption of data.  Experience from RIRs with first generation
   RESTful web services for WHOIS indicate that a large percentage of
   clients operate within browsers and other platforms where full-blown
   XML stacks are not readily available and where JSON is a better fit.

   Additionally, while EPP is used in much of the DNR community it is
   not a universal constant in that industry.  And finally, EPP's use of
   XML predates the specification of JSON.  If EPP had been defined
   today, it may very well have used JSON instead of XML.

   Beyond the specific DNR and RIR communities, the trend in the broader
   Internet industry is also switching to JSON over XML, especially in
   the area of RESTful web services (see [JSON_acendancy]). [JSON_ascendancy]).  Studies
   have also found that JSON is generally less bulky and consequently
   faster to parse (see [JSON_performance_study]).

Appendix F.  Changelog

   [RFC Editor: Please delete this section prior to publication.]

   Initial -00  Adopted as working group  Acknowledgements

   This document 2012-September-18.

   -01

         Minor spelling corrections.  Changed "Registry Data" to
         "Registration Data" for the sake of consistency.

         Transitioned to RFC 5988 links and relationship types from our
         own custom "uris" structure.

         Some examples had 'status' as a string.  Those have been
         corrected as 'status' is always an array of strings.

         Domain variants can now have a multi-valued relationship with
         domain registrations.

         "names" derived from original work on RIR responses in the entity object class was changed to
         "entityNames".

         Some IP address examples change to IPv6.

         Change phone number examples JSON
   by Byron J.  Ellacott, Arturo L.  Servin, Kaveh Ranjbar, and added reference to E.164.

         Added section Andrew
   L.  Newton.  Additionally, this document incorporates work on motivations for using JSON.

         Added error response body section.

         Added DNR
   responses in JSON naming section.

         Added common data structures section.

         Added the IANA Considerations section by Ning Kong, Linlin Zhou, Jiagui Xie, and the media type
         registration.

         Added 'lang' name/value.

         Added internationalization considerations section.

   -02

         Removed level from media type registration.

         Textual changes as given by Ed Lewis.

         Fixed Sean
   Shen.

   The components of the DNR object class linking example noted by Francisco Obispo

         Fixed classes are derived from a lot
   categorization of other examples called out by Alex Sergeyev

         Added a note that JSON names are case sensitive

         Added 'status' to IP networks as suggested WHOIS response formats created by Alex Sergeyev

   -03

         Added jCard verbiage Ning Kong, Linlin
   Zhou, Guangqing Deng, Steve Sheng, Francisco Arias, Ray Bellis, and examples
   Frederico Neves.

   Tom Harrison, Murray Kucherawy, Ed Lewis, Audric Schiltknecht, Naoki
   Kambe, and deleted overlapping
         contact information Maarten Bosteels contributed significant review comments
   and provided clarifying text.  James Mitchell provided text regarding
   the appendix on postal addresses

         Removed the IANA considerations as they have been moved to
         another document

         Changed the remarks structure to be like notices

         Reordering and rewording some processing of the sections so they flow
         better

         Added note about object class "self" links

         Changed ipAddresses in nameserver object class to separate out
         v6 from v4

         Changed IP network version identifier from integer to string to
         be more consistent with ipAddresses identifier in nameserver
         object classes

         Changed DNS names to LDH names unknown JSON attributes and Unicode names

         Modified identified issues
   leading to the definition remodeling of 'conjoined' variant relationship so
         it was circular
         Added 'proxy', 'private', 'redacted', and 'obscured' status
         values (most useful for entities).

         Added a privacy considerations section

         Added a security considerations section

         Added 'reseller' events.  Ernie Dainow and 'sponsor' Francisco
   Obispo provided concrete suggestions that led to a better variant
   model for domain names.

   Ernie Dainow provided the list of entity roles

         Added the 'events' common data structure

         Added 'asEventActor' to entities

         Added appendix background information on event modeling

         Removed the subclasses/superclassing between RIRs/DNRs secure DNS
   attributes and objects for
         entity domains, informative text on DNSSEC, and domain
   many other attributes that appear throughout the object classes

         Change suggested status/relation/etc values to be case/spacing
         consistent

         Normalized some of the definitions
   this document.

   The switch to and incorporation of object class members

         Modifying the JSON signaling section to reference the guidance
         in draft-ietf-weirds-using-http

         Changed the text regarding the process of unknown JSON
         attributes

   -04

         'description' removed from IP network and autnum because it is
         redundant with the remarks structure.

         Added 'entities' array to nameservers.

         Added 'status' to autnum.

         Added 'publicIds' to entity and domain.

         Added embedded entities to the entity object class.

         Added 'idnTable' to variants objects in domain object class.

         Changed the numbers for startNum and endNum in autnum to
         numbers instead of strings.

         Added an example for error response with full rdapConformance
         and notices.

         Added a section discussing help.

         Changed entities to use vcardArray and changed the examples to
         be current with jCard.

         Added a section on structured vs unstructured addresses.

         Added associated to the list of status values.

         Added a secure DNS section changed the 'delegationKey' object
         into the 'secureDNS' object.

         Changed the suggested values to an IANA registry.

         Added 'proxy' to the list of entity roles.

   -05

         Added IANA registration for RDAP JSON Media Type

         Added 'associated' status type.  This was done earlier but got
         dropped during a reorganization of the document.

         Added the following status types:

            active

            inactive

            locked

            pending create

            pending renew

            pending update

            pending transfer

            pending delete

            renew prohibited

         Added the following event actions:

            locked

            unlocked

         Added the following roles:

            notifications

            noc

         Changed the 'tech' role to 'technical'

         Many document reference changes.

         Many examples have been fixed.

         Added links to dsData and keyData.

         Changed flags and protocols to integers in keyData.

         Added 'entities' to the specified list for autnum.

         Added SHOULD/SHOULD NOT language about using "type":
         "application/rdap+json" for self links.

         Added 'port43' to ip networks and autnum.

   -06

         Fix search response example.

         Change the returned search arrays to 'domainSearchResults',
         'entitySearchResults', and 'nameserverSearchResults'.

   -07

         'nameservers' in domain object class jCard was changed to
         'nameServers' as in the example (note the camel case)

         fixed some example per email from James Mitchell

         fixed an example per email from performed by Simon Perreault

         Added "network" to domain object class.

         Added networks and autnums to the entity object class.

         Created a section for "resultsTruncated".

   -08

         Added typed remarks
   Perreault.

   Olaf Kolkman and notices, removed "resultTruncated" in
         favor of them.

         Added "objectClassName".

         Changed JSON reference to RFC 7159.

         Removed unused references to RFC 0791, RFC 2616, RFC 4343, RFC
         5322.

   -09

         Fixed numerous examples.

         Reference to jCard updated.

         Text regarding JSON vCards has been changed to jCards.

         JSON naming rules do not apply to jCards.

         "nameserver" was made consistently all lower case.

         Links contained a "title" array, but it is now just a string
         per RFC 5988.

         Removed Murray Kucherawy chaired the term RESTful IETF's WEIRDS working
   group from the first section so it wouldn't
         have to be expanded.

         Added reference to RFC 2119 and noted that the uppercase form
         is what which this document uses.

         Added text explaining why SHOULDs and SHOULD NOTs are to be
         followed.

         "port43" can now be either an domain name or IP address.

         "objectClassName" is now required.

         Numerous changes in prose for better readability.

         Updated the security considerations section to point to using-
         http and rdap-sec.

   -10

         Addressing many AD comments.

         Changed IANA registrations to IESG.

         'href' is now the only MUST in the a link.

   -11

         Changes to address IETF Last Call comments.

   -12

         Changes to address IESG comments.

   -13

         Changes to address Alyssa's DISCUSS.

         'redacted' status changed to 'removed'

   -14

         Text changes regarding can contain vs has members of for object
         classes. been created.

Authors' Addresses

   Andrew Lee Newton
   American Registry for Internet Numbers
   3635 Concorde Parkway
   Chantilly, VA  20151
   US

   Email:
   United States

   EMail: andy@arin.net
   URI:   http://www.arin.net

   Scott Hollenbeck
   Verisign Labs
   12061 Bluemont Way
   Reston, VA  20190
   US

   Email:
   United States

   EMail: shollenbeck@verisign.com
   URI:   http://www.verisignlabs.com/