Internet Engineering Task Force (IETF)                   R. Ravindranath
Request for Comments: 7584                                      T. Reddy
Category: Standards Track                                   G. Salgueiro
ISSN: 2070-1721                                                    Cisco
                                                               June
                                                               July 2015

      Session Traversal Utilities for NAT (STUN) Message Handling
               for SIP Back-to-Back User Agents (B2BUAs)

Abstract

   Session Initiation Protocol (SIP) Back-to-Back User Agents (B2BUAs)
   are often designed to be on the media path rather than just
   intercepting signaling.  This means that B2BUAs often act on the
   media path leading to separate media legs that the B2BUA correlates
   and bridges together.  When acting on the media path, B2BUAs are
   likely to receive Session Traversal Utilities for NAT (STUN) packets
   as part of Interactive Connectivity Establishment (ICE) processing.

   This document defines behavior for a B2BUA performing ICE processing.
   The goal of this document is to ensure that B2BUAs properly handle
   SIP messages that carry ICE semantics in Session Description Protocol
   (SDP) and STUN messages received as part of the ICE procedures for
   NAT and Firewall traversal of multimedia sessions.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc7584.

Copyright Notice

   Copyright (c) 2015 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   4
   3.  SDP-Modifying Signaling-only B2BUA  . . . . . . . . . . . . .   5
   4.  Media Plane B2BUAs  . . . . . . . . . . . . . . . . . . . . .   5
     4.1.  Overview  . . . . . . . . . . . . . . . . . . . . . . . .   5
     4.2.  Mandatory ICE Termination with B2BUA  . . . . . . . . . .   5
     4.3.  Optional ICE Termination with B2BUA . . . . . . . . . . .   8   9
     4.4.  STUN Handling in B2BUA with Forked Signaling  . . . . . .  11
   5.  Security Considerations . . . . . . . . . . . . . . . . . . .  11  12
   6.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  12
     6.1.  Normative References  . . . . . . . . . . . . . . . . . .  12
     6.2.  Informative References  . . . . . . . . . . . . . . . . .  12  13
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .  13
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  13  14

1.  Introduction

   In many Session Initiation Protocol (SIP) SIP deployments, SIP entities exist in the SIP signaling and
   media path between the originating and final terminating endpoints,
   which go beyond the definition of a traditional SIP proxy.  These SIP
   entities, commonly known as Back-
   to-Back User Agents (B2BUAs), B2BUAs, are described in [RFC7092] and
   often perform functions not defined in Standards Track RFCs.

   SIP [RFC3261] and other session control protocols that try to use a
   direct path for media are typically difficult to use across Network
   Address Translators (NATs).  These protocols use IP addresses and
   transport port numbers encoded in the signaling, such as the Session
   Description Protocol (SDP) SDP
   [RFC4566] and, in the case of SIP, various header fields.  Such
   addresses and ports are unreachable if any peers are separated by
   NATs.

   Mechanisms such as Session Traversal Utilities for NAT (STUN) STUN [RFC5389], Traversal Using Relays around NAT
   (TURN) [RFC5766], and
   Interactive Connectivity Establishment (ICE) ICE [RFC5245] did not exist when protocols like
   SIP began to be deployed.  Some mechanisms, such as the early
   versions of STUN, started appearing, but they were unreliable and
   suffered a number of issues typical for UNilateral Self-Address
   Fixing (UNSAF) as described in [RFC3424].  For these reasons, B2BUAs
   are being used by SIP domains for SIP and media-
   related media-related purposes.
   These B2BUAs use proprietary mechanisms to enable SIP devices behind
   NATs to communicate across the NAT.

   [RFC7362] describes how B2BUAs can perform Hosted NAT Traversal (HNT)
   in certain deployments.  Section 5 of [RFC7362] describes some of the
   issues with Session Border Controllers (SBCs) implementing HNT and
   offers some mitigation strategies.  The most commonly used approach
   to solve these issues is "restricted-latching", defined in Section 5
   of [RFC7362], whereby the B2BUA will not latch to any packets from a
   source public IP address other than the one the SIP User Agent (UA)
   uses for SIP signaling.  However, this is susceptible to attacks
   where an attacker who is able to see the source IP address of the SIP
   UA may generate packets using the same IP address.  There are other
   threats described in Section 5 of [RFC7362] for which Secure Real-
   time Transport Protocol (SRTP) [RFC3711] can be used as a solution.
   However, this would require the B2BUAs to terminate and reoriginate
   SRTP, which is not always desirable.

   This document describes proper behavior of B2BUAs performing ICE
   processing.  This includes defining consistent handling of SIP
   messages carrying ICE semantics in SDP and STUN messages received as
   part of the ICE procedures performed on the media path for NAT and
   Firewall traversal of multimedia sessions.

   A B2BUA can use ICE [RFC5245], which provides authentication tokens
   (conveyed in the ice-ufrag and ice-pwd attributes) that allow the
   identity of a peer to be confirmed before engaging in media exchange.
   This can solve some of the security concerns with HNT solution.
   Further, ICE has other benefits like selecting an address when more
   than one address is available (e.g., a dual-stack environment where
   the host can have both IPv4 and IPv6 addresses), verifying that a
   path works before connecting the call, etc.  For these reasons,
   endpoints often use ICE to pick a candidate pair for media traffic
   between two agents.

   B2BUAs often operate on the media path and have the ability to modify
   SIP headers and SDP bodies as part of their normal operation.  Such
   entities, when present on the media path, are likely to take an
   active role in the session signaling depending on their level of
   activity on the media path.  For example, some B2BUAs modify portions
   of the SDP body (e.g., IP address, port) and subsequently modify the
   media packet headers as well.  Section 18.6 of ICE [RFC5245] explains
   two different behaviors when B2BUAs are present.  Some B2BUAs are
   likely to remove all the SDP ICE attributes before sending the SDP
   across to the other side.  Consequently, the call will appear to both
   endpoints as though the other side doesn't support ICE.  There are
   other types of B2BUAs that pass the ICE attributes without
   modification, yet modify the default destination for media contained
   in the "m=" and "c=" lines and the RTCP attribute (defined in
   [RFC3605]).  This will be detected as an ICE-mismatch, ice-mismatch, and ICE
   processing will be aborted for the session.  The session may continue
   if the endpoints are able to reach each other over the default
   candidate (sent in "m=" and "c=" lines).

   Section 3.1.3 of [RFC7092] defines a SDP-Modifying Signaling-only
   B2BUA that operates in the signaling plane only and is not in the
   media path, but it does modify SDP bodies and is thus aware of and
   understands SDP syntax and semantics.  Such B2BUA MUST follow the
   behavior mentioned in Section 3.

   Section 3.2 of [RFC7092] describes three different categories of
   B2BUAs that operate on both the signaling (SIP and SDP) and media
   planes according to the level of involvement and active participation
   in the media plane:

   o  A B2BUA that acts as a simple media relay.  It is effectively
      unaware of anything that is transported and only modifies the
      transport header (could be UDP/IP) of the media packets.

   o  A B2BUA that performs a media-aware role.  It inspects and
      potentially modifies RTP or RTP Control Protocol (RTCP) headers;
      but it does not modify the payload of RTP/RTCP.

   o  A B2BUA that performs a media-termination role and operates at the
      media payload layer, such as RTP/RTCP payload (e.g., a
      transcoder).

   When B2BUAs that operate on the media plane (media relay, media
   aware, or media termination) are involved in a session between two
   endpoints performing ICE, then it MUST follow the behavior described
   in Section 4.

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   All of the pertinent B2BUA terminology and taxonomy used in this
   document is defined in [RFC7092].

   Network Address Translators (NATs)

   NATs are widely used in the Internet by consumers and organizations.
   Although specific NAT behaviors vary, this document uses the term
   "NAT", which maps to NAT and Network Address Port Translation (NAPT)
   terms from [RFC3022], for devices that map any IPv4 or IPv6 address
   and transport port number to another IPv4 or IPv6 address and
   transport port number.  This includes consumer NATs, Firewall-NATs,
   IPv4-IPv6 NATs, Carrier-Grade NATs (CGNs) [RFC6888], etc.

3.  SDP-Modifying Signaling-only B2BUA

   An SDP-Modifying Signaling-only B2BUA is one that operates in the
   signaling plane only and is not in the media path, but it modifies
   SDP bodies as described in Section 3.1.3 of [RFC7092].  Such B2BUAs
   MUST NOT change the IP address in the "c=" line, the port in the "m="
   line, and the ICE semantics of SDP, as doing so can cause an ice-
   mismatch.

4.  Media Plane B2BUAs

4.1.  Overview

   When one or both of the endpoints are behind a NAT, and there is a
   B2BUA between the endpoints, the B2BUAs MUST support ICE or at a
   minimum support ICE lite functionality as described in [RFC5245].
   Such B2BUAs MUST use the mechanism described in Section 2.2 of
   [RFC5245] to demultiplex STUN packets that arrive on the RTP/RTCP
   port.

   The subsequent sections describe the behavior B2BUAs MUST follow for
   handling ICE messages.  A B2BUA can terminate ICE and thus have two
   ICE contexts with either endpoint.  The reason for ICE termination
   could be due to the need for B2BUA to be in the media path (e.g.,
   address hiding for privacy, interworking between ICE to no-ICE,
   etc.).  A B2BUA can also be in optional ICE termination mode and
   passes across the candidate list and STUN short-term credentials
   (ice-ufrag and ice-pwd attributes) from one endpoint to the other
   side after adding its own candidates.  A B2BUA can be in optional ICE
   termination mode when it does not have a need to be on the media
   path.  The below sections describe the behaviors for these two cases.

4.2.  Mandatory ICE Termination with B2BUA

   A B2BUA that wishes to always be in the media path follows these
   steps:

   o  When a B2BUA sends out the SDP, it MUST advertise support for ICE
      and MAY include B2BUA B2BUA's candidates of different types for each
      component of each media stream.

   o  If the B2BUA is in ICE lite mode as described in Section 2.7 of
      [RFC5245], then it MUST send an a=ice-lite attribute and MUST
      include B2BUA host candidates for each component of each media
      stream.

   o  If the B2BUA supports full ICE, then it MAY include B2BUA B2BUA's
      candidates of different types for each component of each media
      stream.

   o  The B2BUA MUST generate new username and password values for ice-
      ufrag and ice-pwd attributes when it sends out the SDP and MUST
      NOT propagate the ufrag password values it received in the
      incoming SDP.  This ensures that the short-term credentials used
      for both the legs are different.  The short-term credentials
      include authentication tokens (conveyed in the ice-ufrag and ice-
      pwd attributes), which the B2BUA can use to verify the identity of
      the peer.  The B2BUA terminates the ICE messages on each leg and
      does not propagate them.

   o  The B2BUA MUST NOT propagate the candidate list received in the
      incoming SDP to the outbound SDP and instead only advertise its
      candidate list.  The B2BUA MUST also add its default candidate in
      the "c=" line (IP address) and "m=" line (port).  In this way, the
      B2BUA will be always in the media path.

   o  Depending on whether the B2BUA supports ICE lite or full ICE, it
      implements the appropriate procedures mentioned in [RFC5245] for
      ICE connectivity checks.

       +-------+            +-------------------+             +-----+
       | Alice |            | Media Plane B2BUA |             | Bob |
       +-------+            +-------------------+             +-----+
           |(1) INVITE               |(3) INVITE                 |
           |    a=ice-ufrag1         |    a=ice-ufrag2           |
           |    a=ice-pwd1           |    a=ice-pwd2             |
           |   (Alice's IP, port)    |   (B2BUA   (B2BUA's IP, port)      |
           | (Alice's candidate list)|   (B2BUA   (B2BUA's candidate list)  | list)|
           |------------------------>|-------------------------->|
           |                         |                           |
           |(2) 100 trying           |                           |
           |<------------------------|                           |
           |                         |(4) 100 trying             |
           |                         |<--------------------------|
           |                         |                           |
           |                         |(5) 200 OK                 |
           |                         |    a=ice-ufrag3           |
           |                         |    a=ice-pwd3             |
           |                         |    (Bob's IP, port)       |
           |                         |    (Bob's candidate list) |
           |                         |<--------------------------|
           |(6) 200 OK               |                           |
           |    a=ice-ufrag4         |-----------ACK------------>|
           |    a=ice-pwd4           |           (7)             |
           |   (B2BUA (B2BUA's IP, port)      |                           |
           |(B2BUA
           |(B2BUA's candidate list1)  | list1)|                           |
           |<------------------------|                           |
           |                         |                           |
           |--------ACK------------->|                           |
           |        (8)              |                           |
           |                         |                           |
           |<----ICE Connectivity 1->|                           |
           |      checks+conclusion  |<-----ICE Connectivity 2-->|
           |           (9)           |      checks+conclusion    |
           |                         |           (10)            |
           |                         |                           |
           |<-------Media packets--->|<----Media packets-------->|
           |           (13)           (11)          |         (14)         (12)              |
           |                         |                           |
           |<---ICE keepalives 1---->|                           |
           |          (15)          (13)           |<----ICE keepalives 2----->|
                                                (16)
                                                (13)

              Figure 1: INVITE with SDP Having ICE and with a
                     Media Plane B2BUA Terminating ICE
   The above figure shows an example call flow with two endpoints, Alice
   and Bob, using ICE processing, and a B2BUA handing STUN messages from
   both the endpoints.  For the sake of brevity, the entire list of ICE
   SDP attributes are not shown.  Also, the STUN messages exchanged as
   part of ICE connectivity checks are not shown.  Key steps to note
   from the call flow are:

   o  Alice sends an INVITE with SDP having ICE candidates.

   o  The B2BUA modifies the received SDP from Alice by removing the
      received candidate list, gathering its own candidates, and
      generating new username and password values for ice-ufrag and ice-
      pwd attributes.  The B2BUA also changes the "c=" line and "m="
      line to have its default candidate and forwards the INVITE (Step
      3) to Bob.

   o  Bob responds (Step 5) to the INVITE with his own list of
      candidates.

   o  The B2BUA responds to the INVITE from Alice with SDP having a
      B2BUA candidate list.  The B2BUA generates new username and
      password values for ice-ufrag and ice-pwd attributes in the 200 OK
      response (Step 6).

   o  ICE Connectivity checks happen between Alice and the B2BUA in Step
      9.  Depending on whether the B2BUA supports ICE or ICE lite, it
      will follow the appropriate procedures mentioned in [RFC5245].
      ICE Connectivity checks also happen between Bob and the B2BUA in
      Step 10.  Steps 9 and 10 happen in parallel.  The B2BUA always
      terminates the ICE messages on each leg and has two independent
      ICE contexts running.

   o  Media flows between Alice and Bob via B2BUA (Steps 13 11 and 14). 12).

   o  STUN keepalives would be used between Alice and B2BUA (Step 15) 13)
      and between Bob and B2BUA (Step 16) 14) to keep NAT and Firewall
      bindings alive.

   Since there are two independent ICE contexts on either side of the
   B2BUA, it is possible that ICE checks will conclude on one side
   before concluding on the other side.  This could result in an ongoing
   media session for one end while the other is still being set up.  Any
   such media received by the B2BUA would continue to be sent to the
   other side on the default candidate address (that was sent in "c="
   line).

4.3.  Optional ICE Termination with B2BUA

   A B2BUA willing to be in the media path only for NAT traversal, but
   that does not otherwise require to be in the media path, can do the
   following steps mentioned in this section.

   o  When a B2BUA receives an incoming SDP with ICE semantics, it
      copies the received candidate list and appends its own candidate
      list in the outgoing SDP.  The B2BUA also copies the ufrag/
      password values it received in the incoming SDP to the outgoing
      SDP and then sends out the SDP.

   o  The B2BUA B2BUA's candidates MAY have lower priority than the candidates
      provided by the endpoint, this way the endpoint and remote peer
      candidate pairs are tested first before trying candidate pairs
      with B2BUA B2BUA's candidates.

   o  After offer/answer is complete, the endpoints will have both the
      B2BUAs and remote peer candidates.  It will then use ICE
      procedures described in Section 8 of [RFC5245] to nominate a
      candidate pair for sending and receiving media streams.

   o  With this approach, the B2BUA will be in the media path only if
      the ICE checks between all the candidate pairs formed from both
      the endpoints fail.

       +-------+            +-------------------+             +-----+
       | Alice |            | Media Plane B2BUA |             | Bob |
       +-------+            +-------------------+             +-----+
           |(1) INVITE               |(3)  INVITE                |
           |   a=ice-ufrag1          |     a=ice-ufrag1          |
           |   a=ice-pwd1            |     a=ice-pwd1            |
           |  (Alice's IP, port)     | (Alice's IP, port)        |
           |(Alice's candidate list) | (Alice's candidate list + |
           |                         |  B2BUA  B2BUA's candidate list1) |
           |------------------------>|-------------------------->|
           |                         |                           |
           |(2)  100 trying          |                           |
           |<------------------------|                           |
           |                         |(4) 100 trying             |
           |                         |<--------------------------|
           |                         |                           |
           |                         |(5) 200 OK                 |
           |                         |    a=ice-ufrag2           |
           |                         |    a=ice-pwd2             |
           |                         | (Bob's IP, port)          |
           |                         | (Bob's candidate list)    |
           |                         |<--------------------------|
           |(6) 200 OK               |                           |
           |    a=ice-ufrag2         |-----------ACK------------>|
           |    a=ice-pwd2           |           (7)             |
           |  (Bob's IP,port)        |                           |
           |(B2BUA
           |(B2BUA's candidate list2 |                           |
           | + Bob's candidate list) |                           |
           |<------------------------|                           |
           |                         |                           |
           |----------ACK----------->|                           |
           |          (8)            |                           |
           |                         |                           |
           |<----ICE Connectivity 1 (9)------------------------->|
           |                         |                           |
           |<----ICE Connectivity 2->|                           |
           |      checks+conclusion  |<-----ICE Connectivity 2-->|
           |           (10)          |      checks+conclusion    |
           |                         |           (11)            |
           |                         |                           |
           |<-------------------Media packets------------------->|
           |                       (12)                          |
           |                         |                           |
           |<------------------ICE keepalives------------------->|
                                   (13)

              Figure 2: INVITE with SDP Having ICE and with a
            Media Plane B2BUA in Optional ICE Termination Mode
   The above figure shows a sample call flow with two endpoints, Alice
   and Bob, doing ICE, and a B2BUA handing STUN messages from both the
   endpoints.  For the sake of brevity, the entire ICE SDP attributes
   are not shown.  Also, the STUN messages exchanged as part of the ICE
   connectivity checks are not shown.  Key steps to note from the call
   flow are:

   o  Alice sends an INVITE with an SDP having its own candidate list.

   o  The B2BUA propagates the received candidate list in incoming SDP
      from Alice after adding its own candidate list.  The B2BUA also
      propagates the received ice-ufrag and ice-password ice-pwd attributes from
      Alice in the INVITE (Step 3) to Bob.  In this example, the B2BUA
      does not modify the default candidate sent in the "c=" line and
      "m=" line and retains the values sent originally from Alice.  If
      B2BUA wants to be in the media path when ICE connectivity checks
      between endpoints fails or one of the endpoints does not support
      ICE, then it overwrites its candidate address and port as a
      default candidate in the "m=" and "c=" lines.

   o  Bob responds (Step 5) to the INVITE with his own list of
      candidates.

   o  The B2BUA responds to the INVITE from Alice with an SDP having a
      B2BUA
      B2BUA's candidate list and the candidate list received from Bob.
      The B2BUA would also propagate the received ice-ufrag and ice-
      password ice-pwd
      attributes from Bob in (Step 5) to Alice in the 200 OK response
      (Step 6).

   o  ICE Connectivity checks happen between Alice and Bob in (Step 9).
      ICE Connectivity checks also happen between Alice and the B2BUA
      and Bob and the B2BUA as shown in Steps 10 and 11.  Steps 9, 10,
      and 11 happen in parallel.  In this example, Alice and Bob
      conclude ICE with a candidate pair that enables them to send media
      directly.

   o  Media flows between Alice and Bob in Step 12.

4.4.  STUN Handling in B2BUA with Forked Signaling

   Because of forking, a B2BUA might receive multiple answers for a
   single outbound INVITE.  When this occurs, the B2BUA SHOULD follow
   Sections 3.2 or 3.3 for all of those received answers.

5.  Security Considerations

   As described in Section 2.5 of [RFC5245], ICE uses the STUN short-
   term credential mechanism for authentication and message integrity.
   STUN connectivity checks include the MESSAGE-INTEGRITY attribute that
   contains HMAC-SHA1 of the STUN message, and the Hashed Message
   Authentication Code (HMAC) is computed using the key exchanged in the
   signaling channel.  The signaling channel between the endpoints and
   B2BUA MUST be encrypted so that the key is not visible to
   eavesdroppers, otherwise the security benefits of short-term
   authentication would be lost.

6.  References

6.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/
              RFC2119, 10.17487/RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC3711]  Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K.
              Norrman, "The Secure Real-time Transport Protocol (SRTP)",
              RFC 3711, DOI 10.17487/RFC3711, March 2004,
              <http://www.rfc-editor.org/info/rfc3711>.

   [RFC5245]  Rosenberg, J., "Interactive Connectivity Establishment
              (ICE): A Protocol for Network Address Translator (NAT)
              Traversal for Offer/Answer Protocols", RFC 5245,
              DOI 10.17487/RFC5245, April 2010,
              <http://www.rfc-editor.org/info/rfc5245>.

   [RFC5389]  Rosenberg, J., Mahy, R., Matthews, P., and D. Wing,
              "Session Traversal Utilities for NAT (STUN)", RFC 5389,
              DOI 10.17487/RFC5389, October 2008,
              <http://www.rfc-editor.org/info/rfc5389>.

   [RFC5766]  Mahy, R., Matthews, P., and J. Rosenberg, "Traversal Using
              Relays around NAT (TURN): Relay Extensions to Session
              Traversal Utilities for NAT (STUN)", RFC 5766,
              DOI 10.17487/RFC5766, April 2010,
              <http://www.rfc-editor.org/info/rfc5766>.

   [RFC7092]  Kaplan, H. and V. Pascual, "A Taxonomy of Session
              Initiation Protocol (SIP) Back-to-Back User Agents", RFC
              7092, DOI 10.17487/RFC7092, December 2013,
              <http://www.rfc-editor.org/info/rfc7092>.

6.2.  Informative References

   [RFC3022]  Srisuresh, P. and K. Egevang, "Traditional IP Network
              Address Translator (Traditional NAT)", RFC 3022,
              DOI 10.17487/RFC3022, January 2001,
              <http://www.rfc-editor.org/info/rfc3022>.

   [RFC3261]  Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,
              A., Peterson, J., Sparks, R., Handley, M., and E.
              Schooler, "SIP: Session Initiation Protocol", RFC 3261,
              DOI 10.17487/RFC3261, June 2002,
              <http://www.rfc-editor.org/info/rfc3261>.

   [RFC3424]  Daigle, L., Ed. and IAB, "IAB Considerations for
              UNilateral Self-Address Fixing (UNSAF) Across Network
              Address Translation", RFC 3424, DOI 10.17487/RFC3424,
              November 2002, <http://www.rfc-editor.org/info/rfc3424>.

   [RFC3605]  Huitema, C., "Real Time Control Protocol (RTCP) attribute
              in Session Description Protocol (SDP)", RFC 3605,
              DOI 10.17487/RFC3605, October 2003,
              <http://www.rfc-editor.org/info/rfc3605>.

   [RFC4566]  Handley, M., Jacobson, V., and C. Perkins, "SDP: Session
              Description Protocol", RFC 4566, DOI 10.17487/RFC4566,
              July 2006, <http://www.rfc-editor.org/info/rfc4566>.

   [RFC6888]  Perreault, S., Ed., Yamagata, I., Miyakawa, S., Nakagawa,
              A., and H. Ashida, "Common Requirements for Carrier-Grade
              NATs (CGNs)", BCP 127, RFC 6888, DOI 10.17487/RFC6888,
              April 2013, <http://www.rfc-editor.org/info/rfc6888>.

   [RFC7362]  Ivov, E., Kaplan, H., and D. Wing, "Latching: Hosted NAT
              Traversal (HNT) for Media in Real-Time Communication", RFC
              7362, DOI 10.17487/RFC7362, September 2014,
              <http://www.rfc-editor.org/info/rfc7362>.

Acknowledgements

   Special thanks to Dan Wing, Pal Martinsen, Charles Eckel, Marc Petit-
   Huguenin, Simon Perreault, Lorenzo Miniero, Ari Keranen, and
   Parthasarathi R Ravindran for their constructive comments, suggestions,
   and early reviews that were critical to the formulation and
   refinement of this document.

   Thanks to Ben Campbell, Barry Leiba, Nevil Brownlee, Spencer Dawkins,
   Sam Hartman, Stephen Farrell, Kathleen Moriarty, and Francis Dupont
   for their thoughtful review comments.

Authors' Addresses

   Ram Mohan Ravindranath
   Cisco Systems, Inc.
   Cessna Business Park, Varthur Hobli
   Sarjapur Marathahalli Outer Ring Road
   Bangalore, Karnataka  560103
   India

   Email: rmohanr@cisco.com

   Tirumaleswar Reddy
   Cisco Systems, Inc.
   Cessna Business Park, Varthur Hobli
   Sarjapur Marathalli Outer Ring Road
   Bangalore, Karnataka  560103
   India

   Email: tireddy@cisco.com

   Gonzalo Salgueiro
   Cisco Systems, Inc.
   7200-12 Kit Creek Road
   Research Triangle Park, NC  27709
   United States

   Email: gsalguei@cisco.com