Network Working Group
Internet Architecture Board (IAB)                     J. Hildebrand, Ed.
Internet-Draft                                       Cisco Systems, Inc.
Intended status:
Request for Comments: 7992                                       Mozilla
Category: Informational                                       P. Hoffman
Expires: January 1, 2017
ISSN: 2070-1721                                                    ICANN
                                                           June 30,
                                                           December 2016

         HyperText Markup Language Request For Comments

                          HTML Format
                         draft-iab-html-rfc-03 for RFCs

Abstract

   In order to meet the evolving needs of the Internet community, the
   canonical format for RFCs is changing from a plain-text, ASCII-only
   format to a
   canonical an XML format that will will, in turn turn, be rendered into several
   publication formats.  This document defines the HTML format that will
   be rendered for an RFC or Internet-Draft.

Status of This Memo

   This Internet-Draft document is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents not an Internet Standards Track specification; it is
   published for informational purposes.

   This document is a product of the Internet Engineering
   Task Force (IETF).  Note Architecture Board (IAB)
   and represents information that other groups may also distribute
   working documents as Internet-Drafts.  The list the IAB has deemed valuable to
   provide for permanent record.  It represents the consensus of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid the
   Internet Architecture Board (IAB).  Documents approved for
   publication by the IAB are not a maximum candidate for any level of Internet
   Standard; see Section 2 of RFC 7841.

   Information about the current status of six months this document, any errata,
   and how to provide feedback on it may be updated, replaced, or obsoleted by other documents obtained at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on January 1, 2017.
   http://www.rfc-editor.org/info/rfc7992.

Copyright Notice

   Copyright (c) 2016 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   4
   2.  Requirements for the HTML Format  . . . . . . . . . . . . . .   5
     2.1.  Requirements for Accessibility  . . . . . . . . . . . . .   6
   3.  HTML Version  . . . . . . . . . . . . . . . . . . . . . . . .   7
   4.  HTML Syntax . . . . . . . . . . . . . . . . . . . . . . . . .   7
   5.  Common Items  . . . . . . . . . . . . . . . . . . . . . . . .   8
     5.1.  IDs . . . . . . . . . . . . . . . . . . . . . . . . . . .   8
     5.2.  Pilcrows  . . . . . . . . . . . . . . . . . . . . . . . .   8
   6.  Front Matter  . . . . . . . . . . . . . . . . . . . . . . . .   9
     6.1.  DOCTYPE . . . . . . . . . . . . . . . . . . . . . . . . .   9
     6.2.  Root Element  . . . . . . . . . . . . . . . . . . . . . .   9
     6.3.  Head  <head> Element  . . . . . . . . . . . . . . . . . . . . . .   9
       6.3.1.  Charset Declaration . . . . . . . . . . . . . . . . .   9
       6.3.2.  Document Title  . . . . . . . . . . . . . . . . . . .  10
       6.3.3.  Document Metadata . . . . . . . . . . . . . . . . . .  10
       6.3.4.  Link to XML source Source  . . . . . . . . . . . . . . . . .  10
       6.3.5.  Link to License . . . . . . . . . . . . . . . . . . .  10
       6.3.6.  Style . . . . . . . . . . . . . . . . . . . . . . . .  11
       6.3.7.  Links . . . . . . . . . . . . . . . . . . . . . . . .  11
     6.4.  Page Headers and Footers  . . . . . . . . . . . . . . . .  11  12
     6.5.  Document Information  . . . . . . . . . . . . . . . . . .  12  13
     6.6.  Table of Contents . . . . . . . . . . . . . . . . . . . .  13  14
   7.  Main Body . . . . . . . . . . . . . . . . . . . . . . . . . .  14
   8.  Back Matter . . . . . . . . . . . . . . . . . . . . . . . . .  14
     8.1.  Index . . . . . . . . . . . . . . . . . . . . . . . . . .  14
       8.1.1.  Index Contents  . . . . . . . . . . . . . . . . . . .  14  15
       8.1.2.  Index Letters . . . . . . . . . . . . . . . . . . . .  15
       8.1.3.  Index Items . . . . . . . . . . . . . . . . . . . . .  15  16
       8.1.4.  Index Sub-items Subitems  . . . . . . . . . . . . . . . . . . .  16
     8.2.  Authors' Addresses Section  . . . . . . . . . . . . . . . . . . .  16  17
     8.3.  Document Information  . . . . . . . . . . . . . . . . . .  17  18
   9.  Elements  . . . . . . . . . . . . . . . . . . . . . . . . . .  17  18
     9.1.  <abstract>  . . . . . . . . . . . . . . . . . . . . . . .  17  18
     9.2.  <address> . . . . . . . . . . . . . . . . . . . . . . . .  17  19
     9.3.  <annotation>  . . . . . . . . . . . . . . . . . . . . . .  18  19
     9.4.  <area>  . . . . . . . . . . . . . . . . . . . . . . . . .  18  19
     9.5.  <artwork> . . . . . . . . . . . . . . . . . . . . . . . .  18  20
       9.5.1.  Text Artwork  . . . . . . . . . . . . . . . . . . . .  19  20
       9.5.2.  SVG Artwork . . . . . . . . . . . . . . . . . . . . .  19  20
       9.5.3.  Other Artwork . . . . . . . . . . . . . . . . . . . .  20  21
     9.6.  <aside> . . . . . . . . . . . . . . . . . . . . . . . . .  20  21
     9.7.  <author>  . . . . . . . . . . . . . . . . . . . . . . . .  20  21
       9.7.1.  Authors in Document Information . . . . . . . . . . .  20  22
       9.7.2.  Authors of this document This Document  . . . . . . . . . . . . . .  21  22
       9.7.3.  Authors of references References . . . . . . . . . . . . . . . .  22  24
     9.8.  <back>  . . . . . . . . . . . . . . . . . . . . . . . . .  23  24
     9.9.  <bcp14> . . . . . . . . . . . . . . . . . . . . . . . . .  23  25
     9.10. <blockquote>  . . . . . . . . . . . . . . . . . . . . . .  24  25
     9.11. <boilerplate> . . . . . . . . . . . . . . . . . . . . . .  24  26
     9.12. <br>  . . . . . . . . . . . . . . . . . . . . . . . . . .  24  26
     9.13. <city>  . . . . . . . . . . . . . . . . . . . . . . . . .  25  26
     9.14. <code>  . . . . . . . . . . . . . . . . . . . . . . . . .  25  26
     9.15. <country> . . . . . . . . . . . . . . . . . . . . . . . .  25  26
     9.16. <cref>  . . . . . . . . . . . . . . . . . . . . . . . . .  25  27
     9.17. <date>  . . . . . . . . . . . . . . . . . . . . . . . . .  25  27
     9.18. <dd>  . . . . . . . . . . . . . . . . . . . . . . . . . .  26  27
     9.19. <displayreference>  . . . . . . . . . . . . . . . . . . .  26  27
     9.20. <dl>  . . . . . . . . . . . . . . . . . . . . . . . . . .  26  27
     9.21. <dt>  . . . . . . . . . . . . . . . . . . . . . . . . . .  26  27
     9.22. <em>  . . . . . . . . . . . . . . . . . . . . . . . . . .  26  28
     9.23. <email> . . . . . . . . . . . . . . . . . . . . . . . . .  26  28
     9.24. <eref>  . . . . . . . . . . . . . . . . . . . . . . . . .  26  28
     9.25. <figure>  . . . . . . . . . . . . . . . . . . . . . . . .  27  28
     9.26. <front> . . . . . . . . . . . . . . . . . . . . . . . . .  27  28
     9.27. <iref>  . . . . . . . . . . . . . . . . . . . . . . . . .  27  29
     9.28. <keyword> . . . . . . . . . . . . . . . . . . . . . . . .  27  29
     9.29. <li>  . . . . . . . . . . . . . . . . . . . . . . . . . .  27  29
     9.30. <link>  . . . . . . . . . . . . . . . . . . . . . . . . .  28  29
     9.31. <middle>  . . . . . . . . . . . . . . . . . . . . . . . .  28  29
     9.32. <name>  . . . . . . . . . . . . . . . . . . . . . . . . .  28  29
     9.33. <note>  . . . . . . . . . . . . . . . . . . . . . . . . .  28  30
     9.34. <ol>  . . . . . . . . . . . . . . . . . . . . . . . . . .  28  30
       9.34.1.  Percent styles Styles . . . . . . . . . . . . . . . . . . .  28  30
       9.34.2.  Standard styles Styles  . . . . . . . . . . . . . . . . . .  29  30
     9.35. <organization>  . . . . . . . . . . . . . . . . . . . . .  29  31
     9.36. <phone> . . . . . . . . . . . . . . . . . . . . . . . . .  29  31
     9.37. <postal>  . . . . . . . . . . . . . . . . . . . . . . . .  29  31
     9.38. <postalLine>  . . . . . . . . . . . . . . . . . . . . . .  30  32
     9.39. <refcontent>  . . . . . . . . . . . . . . . . . . . . . .  31  32
     9.40. <reference> . . . . . . . . . . . . . . . . . . . . . . .  31  33
     9.41. <referencegroup>  . . . . . . . . . . . . . . . . . . . .  31  33
     9.42. <references>  . . . . . . . . . . . . . . . . . . . . . .  32  34
     9.43. <region>  . . . . . . . . . . . . . . . . . . . . . . . .  33  34
     9.44. <relref>  . . . . . . . . . . . . . . . . . . . . . . . .  33  35
       9.44.1.  displayFormat='of' . . . . . . . . . . . . . . . . .  33  35
       9.44.2.  displayFormat='comma'  . . . . . . . . . . . . . . .  34  35
       9.44.3.  displayFormat='parens' . . . . . . . . . . . . . . .  34  36
       9.44.4.  displayFormat='bare' . . . . . . . . . . . . . . . .  35  36
     9.45. <rfc> . . . . . . . . . . . . . . . . . . . . . . . . . .  35  37
     9.46. <section> . . . . . . . . . . . . . . . . . . . . . . . .  35  37
     9.47. <seriesInfo>  . . . . . . . . . . . . . . . . . . . . . .  36  37
     9.48. <sourcecode>  . . . . . . . . . . . . . . . . . . . . . .  36  38
     9.49. <street>  . . . . . . . . . . . . . . . . . . . . . . . .  36  38
     9.50. <strong>  . . . . . . . . . . . . . . . . . . . . . . . .  36  38
     9.51. <sub> . . . . . . . . . . . . . . . . . . . . . . . . . .  36  38
     9.52. <sup> . . . . . . . . . . . . . . . . . . . . . . . . . .  37  38
     9.53. <t> . . . . . . . . . . . . . . . . . . . . . . . . . . .  37  38
     9.54. <table> . . . . . . . . . . . . . . . . . . . . . . . . .  37  39
     9.55. <tbody> . . . . . . . . . . . . . . . . . . . . . . . . .  37  39
     9.56. <td>  . . . . . . . . . . . . . . . . . . . . . . . . . .  37  39
     9.57. <tfoot> . . . . . . . . . . . . . . . . . . . . . . . . .  37  39
     9.58. <th>  . . . . . . . . . . . . . . . . . . . . . . . . . .  37  39
     9.59. <thead> . . . . . . . . . . . . . . . . . . . . . . . . .  37  39
     9.60. <title> . . . . . . . . . . . . . . . . . . . . . . . . .  37  39
     9.61. <tr>  . . . . . . . . . . . . . . . . . . . . . . . . . .  38  39
     9.62. <tt>  . . . . . . . . . . . . . . . . . . . . . . . . . .  38  40
     9.63. <ul>  . . . . . . . . . . . . . . . . . . . . . . . . . .  38  40
     9.64. <uri> . . . . . . . . . . . . . . . . . . . . . . . . . .  38  40
     9.65. <workgroup> . . . . . . . . . . . . . . . . . . . . . . .  38  40
     9.66. <xref>  . . . . . . . . . . . . . . . . . . . . . . . . .  38  40
     9.67. <svg xmlns='http://www.w3.org/2000/svg'>  . . . . . . . .  39  41
   10. IANA Security Considerations . . . . . . . . . . . . . . . . . . . . .  39  41
   11. Security Considerations . . References  . . . . . . . . . . . . . . . . .  39
   12. Acknowledgments . . . . . . . .  41
     11.1.  Normative References . . . . . . . . . . . . . . .  39
   13. References . . .  41
     11.2.  Informative References . . . . . . . . . . . . . . . . .  42
   IAB Members at the Time of Approval . . . . .  39
     13.1.  Normative References . . . . . . . . . .  43
   Acknowledgments . . . . . . . .  39
     13.2.  Informative References . . . . . . . . . . . . . . . . .  40  43
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  41  43

1.  Introduction

   As described in [I-D.iab-rfc-framework], [RFC7990], the RFC Series is changing.  One of those
   changes includes the RFC Editor publishing a non-
   canonical non-canonical HTML
   version of RFCs.

   This document describes the HTML format that will be used as one of
   the publication formats for the RFC Series.  It defines a strict
   subset of HTML appropriate for RFC Series documents.  The visual
   layout of the document will be defined through a cascading style
   sheet (CSS) [W3C.REC-CSS2-20110607].  The CSS will be included in the
   HTML file but will be described in [I-D.iab-rfc-css]. [RFC7993].

   The details (particularly any vocabularies) described in this
   document are expected to change based on experience gained in
   implementing the RFC production center's toolset. new publication toolsets.  Revised documents will be
   published capturing those changes as the toolset is toolsets are completed.
   Other implementers must not expect those changes to remain backwards-compatible backwards
   compatible with the details described in this document.

2.  Requirements for the HTML Format

   This section lists the design requirements used to create the HTML
   format described in this document.  These requirements build on those
   found in [RFC6949].  Many of these requirements are naturally
   fulfilled by using the output of the preparation tool
   [I-D.iab-rfcv3-preptool]. [RFC7998].

   o  The HTML has to render correctly on a list of browser versions
      that the RFC Editor will keep up to date outside of this document.

   o  The format will consist of a subset of HTML deemed to be widely
      implemented by common browsers at the time the specification is
      created, likely to continue to be widely-implemented, widely implemented, and unlikely
      to cause security issues.  This will maximize the chances that
      future HTML renderers (such as new web browsers) will continue to
      produce readable text from the HTML format without the format
      needing to be changed frequently.

   o  These requirements are expected to change in the future to reflect
      the expectation that HTML rendering will be required for current
      versions of browsers and platforms, while ideally continuing to
      render correctly on recent versions of those browsers.

   o  The HTML documents from the RFC Editor or Internet-Drafts
      directory may be re-rendered from the canonical XML format in the
      future to ensure the ongoing readability of the documents.  The
      intent is that any re-rendering would be due to exceptional
      circumstances rather than for minor annoyances.

   o  The HTML must display adequately in at least one text-based
      browser.  Some consumers of the RFC series Series can only access the
      series
      documents on text-based terminals.

   o  The HTML document will be self-contained, without requiring
      external files for images, CSS, JavaScript, or the like.  This
      will allow the HTML file to be moved over various non-HTTP
      transports (such as e-mail, email, FTP, and rsync) without breakage.

   o  JavaScript will be supported on a limited basis.  It will not be
      permitted to overwrite or change any text present in the rendered
      html.
      HTML.  It may, on a limited basis, add additional text that
      provides post-publication metadata or pointers if warranted.  All
      such text will be clearly marked as additional.

   o  The HTML document will allow easy local override of the default
      CSS formatting.  This will allow users who have a different visual
      style that they prefer to make RFCs display with that style
      without having to alter the contents of the HTML document.  This
      might also be valuable for allowing people with specific
      accessibility needs to use a customized CSS.

   o  HTML tags in documents will rarely have attributes whose only
      purpose is to affect the rendered styling, and those will only be
      used if it would not be possible to specify that styling in a CSS.
      No such attributes are known at this time.

   o  Both user-defined and auto-generated anchors must be supported and
      linkable, with user-defined anchors appearing in an "id"
      attribute.  Auto-generated anchors will be generated for every
      heading, paragraph, and so on, not just those that do not have
      user-defined anchors.  User-defined anchors may, and auto-
      generated anchors will, appear next to paragraphs, figures,
      tables, blockquotes, and section titles.

   o  All section, sections, subsections, figures, and paragraphs should have
      stable numbered link anchors.  Additionally, anchors expressed in
      the source XML should be exposed as anchors in the HTML output as
      well.

   o  The HTML must make it easy to separate sections along with all of
      their subsections into separate files.  This will make creating
      EPUB documents easier in the future.

   o  The HTML produced for Internet-Drafts will differ from that
      produced by the RFC Editor due to differences in the output from
      the prep tool.

   o  The abstract must be marked up or tagged in a way that popular
      search engines will extract it as a summary.

2.1.  Requirements for Accessibility

   o  Normative information must be easily accessible to the following
      consumers:

      *  People with impaired vision, including those that use large
         fonts and those that use screen readers

      *  People with difficulty distinguishing between colors

      *  People who use devices with small screens, such as cell phones

   o  Specific instances where goals for accessibility are important in
      the design choices of the format have been called out in the text.

   o  NOTE:  Note: designing for these consumers does not preclude the use of
      features they cannot use, but it does require that key semantic
      data
      is not be lost when read using the tools and settings that are
      required by a given constituency.

3.  HTML Version

   The RFC Editor will periodically determine which version of the HTML
   specification will be referenced for tools generating the format
   defined in this document.  The starting version will be that defined
   in [W3C.REC-html5-20141028], commonly known as "HTML5".  Although the
   HTML specification mandates several of the syntax and structure rules
   described in this document, they are called out here for emphasis.

4.  HTML Syntax

   The processor emitting HTML from the XML source will follow these
   rules:

   o  The HTML output is encoded as UTF-8, as specified in [RFC3629].

   o  The document is valid HTML.

   o  Double quotes (U+0022 QUOTATION MARK: ") are used to quote
      attribute values unless the HTML specification forbids quoting a
      particular attribute.

   o  Each logical line is terminated solely with a \n (U+000A: LINE
      FEED), otherwise known as "Unix-style" line endings.

   o  Code points below (U+0020: SPACE) or character entity references
      that generate them (e.g. &#9;), other than (U+000A: LINE FEED) may
      not be used.  NOTE:  Note: this rule explicitly forbids \t (U+0009:
      CHARACTER TABULATION), \f (U+000C: FORM FEED), and \r (U+000D:
      CARRIAGE RETURN) from appearing in the HTML output.

   o  Comments in the source XML, if any, will not be copied into the
      HTML.

   o  The HTML output will be pretty-printed, using whatever consistent
      rules are deemed best by the developers of the HTML production
      tools.

   NOTE:

   Note: none of these rules affect the rendered output of the HTML, but
   they are intended to increase the chance that text comparison tools
   (e.g., "diff") that operate on the HTML output are easier to write.

5.  Common Items

   This section lists items that are common across multiple parts of the
   HTML document.

5.1.  IDs

   HTML elements that are generated from XML elements that include an
   "anchor" attribute will use the value of the "anchor" attribute as
   the value of the "id" attribute of the corresponding HTML element.
   The prep tool produces XML with "anchor" attributes in all elements
   that need them.  Some HTML constructs (such as <section>) will use
   multiple instances of these identifiers.

5.2.  Pilcrows

   Each paragraph, artwork, or sourcecode segment outside of a <figure>
   or <table> element will be appended with a space and a "pilcrow"
   (U+00B6: PILCROW SIGN), otherwise known as a "paragraph sign".  For
   the purposes of clarity in ASCII renderings of this document, in this
   document pilcrows are rendered as "&para;".  The pilcrow will be
   linked to the "id" attribute on the XML entity to which it is
   associated using an <a> element of class "pilcrow".  For example:

   <p id="s-1.1-1">
     Some paragraph text. <a class="pilcrow" href="#s-1.1-1">&para;</a>
   </p>

   The pilcrow will normally be invisible unless the element it is
   attached to is moused over.  The pilcrow will be surrounded by a link
   that points to the element it is attached to.

   Pilcrows are never included inside a <table> or <figure> element,
   since the figure number or table number serves as an adequate link
   target.

   Elements that might otherwise contain a pilcrow do not get marked
   with a pilcrow if they contain one or more child elements that are
   marked with a pilcrow.  For example:

   <blockquote id="s-1.2-1">
     <p id="s-1.2-2">Four score and seven years ago our fathers brought
       forth on this continent, a new nation, conceived in Liberty, and
       dedicated to the proposition that all men are created equal.
       <a href="#s-1.2-2" class="pilcrow">&para;</a></p>
     <!-- NO pilcrow here -->
   </blockquote>

6.  Front Matter

   The front matter of the HTML format contains processing information,
   metadata of various types, and styling information that applies to
   the document as a whole.  This section describes HTML that is not
   necessarily a direct transform from the XML format.  For more details
   on each of the tags that generate content in this section, see
   Section 9.

6.1.  DOCTYPE

   The DOCTYPE of the document is "html", which declares that the
   document is compliant with HTML5.  The document will start with
   exactly this string:

   <!DOCTYPE html>

6.2.  Root Element

   The root element of the document is <html>.  This element includes a
   lang
   "lang" attribute, whose value is a [RFC5646] language tag describing tag, as discussed in
   [RFC5646], that describes the natural language of the document.  The
   language tag to be included is "en".  The class of the <html> element
   will be copied verbatim from the XML <rfc> element's <front>
   element's <seriesInfo> element's "name" attributes (separated by spaces),
   spaces; see Section 2.47.3 of [RFC7991]), allowing CSS to style RFCs
   and Internet-Drafts differently from one another (if needed):

   <html lang="en" class="RFC">

6.3.  Head  <head> Element

   The root <html> will contain a <head> element that contains the
   following elements, as needed.

6.3.1.  Charset Declaration

   In order to be correctly processed by browsers that load the HTML
   using a mechanism that does not provide a valid content-type or
   charset (such as from a local file system using a "file:" URL), the
   HTML <head> element contains a <meta> element, with charset whose "charset"
   attribute
   with value is "utf-8":

   <meta charset="utf-8">

6.3.2.  Document Title

   The contents of the <title> element from the XML source will be
   placed inside an HTML <title> element in the header.

6.3.3.  Document Metadata

   The following <meta> elements will be included:

   o  author - one each for the each of the "fullname"s and
      "asciiFullname"s of all of the <author>s from the <front> of the
      XML source

   o  description - the <abstract> from the XML source

   o  generator - the name and version number of the software used to
      create the HTML

   o  keywords - comma-separated <keyword>s from the XML source

   For example:

   <meta name="author" content="Joe Hildebrand">
   <meta name="author" content="JOE HILDEBRAND">
   <meta name="author" content="Heather Flanagan">
   <meta name="description" content="This document defines...">
   <meta name="generator" content="xmljade v0.2.4">
   <meta name="keywords" content="html,css,rfc">

   Note: the HTML <meta> tag does not contain a closing slash.

6.3.4.  Link to XML source Source

   The <head> element contains a <link> tag, with "rel" attribute of
   "alternate", "type" attribute of "application/rfc+xml", and "href"
   attribute pointing to the prepared XML source that was used to
   generate this document.

   <link rel="alternate" type="application/rfc+xml" href="source.xml">

6.3.5.  Link to License

   The <head> element contains a <link> tag, with "rel" attribute of
   "license" and "href" attribute pointing to the an appropriate
   copyright license for the document.

   <link rel="license" href="https://www.rfc-editor.org/copyright/">
      href="https://trustee.ietf.org/trust-legal-provisions.html">

6.3.6.  Style

   The <head> element contains an embedded CSS style sheet in a <style> element.
   The styles in the style sheet are to be set consistently between
   documents by the RFC Editor, according to the best practices of the
   day.

   To ensure consistent formatting, individual style attributes should
   not be used in the main portion of the document.

   Different readers of a specification will desire different formatting
   when reading the HTML versions of RFCs.  To facilitate this, the
   <head> element also includes a <link> to a style sheet in the same
   directory as the HTML file, named "rfc-local.css".  Any formatting in
   the linked style sheet will override the formatting in the included
   style sheet.  For example:

   <style>
     body {}
     ...
   </style>
   <link rel="stylesheet" type="text/css" href="rfc-local.css">

6.3.7.  Links

   Each <link> element from the XML source is copied into the HTML
   header.  Note: the HTML <link> element does not include a closing
   slash.

6.4.  Page Headers and Footers

   In order to simplify printing by HTML renderers that implement
   [W3C.WD-css3-page-20130314], a hidden HTML <table> tag of class
   "ears" is added at the beginning of the HTML <body> tag, containing
   HTML <thead> and <tfoot> tags, each of which contains an HTML <tr>
   tag, which contains three HTML <td> tags with class "left", "center",
   and "right", respectively.

   The <thead> corresponds to the top of the page, the <tfoot> to the
   bottom.  The string "[Page]" can be used as a placeholder for the
   page number.  In practice, this must always be in the <tfoot>'s right
   <td>, and no control of the formatting of the page number formatting is implied.

   <table class="ears">
     <thead>
       <tr>
         <td class="left">Internet-Draft</td>
         <td class="center">HTML RFC</td>
         <td class="right">March 2016</td>
       </tr>
     </thead>
     <tfoot>
       <tr>
         <td class="left">Hildebrand</td>
         <td class="center">Expires September 2, 2016</td>
         <td class="right">[Page]</td>
       </tr>
     </tfoot>
   </table>

6.5.  Document Information

   Information about the document as a whole will appear as the first
   child of the HTML <body> element, embedded in an HTML <dl> element
   with id="identifiers".  The defined terms in the definition list are
   "Workgroup:", "Series:", "Status:", "Published:", and "Author:" or
   "Authors:" (as appropriate).  For example:

   <dl id="identifiers">
     <dt>Workgroup:</dt>
       <dd class="workgroup">rfc-interest</dd>
     <dt>Series:</dt>
       <dd class="series">Internet-Draft</dd>
     <dt>Status:</dt>
       <dd class="status">Informational</dd>
     <dt>Published:</dt>
       <dd><time datetime="2014-10-25"
                 class="published">2014-10-25</time></dd>
     <dt>Authors:</dt>
       <dd class="authors">
         <div class="author">
           <span class="initial">J.</span>
           <span class="surname">Hildebrand</span>
           (<span class="organization">Cisco Systems, Inc.</span>), Ed. Inc.</span>)
           <span class="editor">Ed.</span>
         </div>
         <div class="author">
           <span class="initial">H.</span>
           <span class="surname">Flanagan</span>
           (<span class="organization">RFC Editor</span>)
         </div>
       </dd>
   </dl>

6.6.  Table of Contents

   The table of contents will follow the boilerplate if the XML's <rfc>
   element's tocInclude "tocInclude" attribute has the value "true".  An HTML <h2>
   heading containing the text "Table of Contents" will be followed by a
   <nav> element that contains a <ul> element for each depth of the
   section hierarchy.  Each section will be represented by a <li>
   element containing links by the section number (from the "pn"
   attribute) and by the name (from the "slugifiedName" attribute of the
   <name> child element).  Each <nav>, <ul>, and <li> element will have
   the class "toc".

   For example:

   <h2 id="toc">Table of Contents</h2>
   <nav class="toc">
     <ul class="toc">
       <li class="toc">
         <a href="s-1">1</a>. <a href="n-introduction">Introduction</a>
       </li>
       <ul class="toc">
         <li class="toc">
           <a href="s-1.1">1.1</a>. <a href="n-sub-intro">Sub Intro</a>
         </li>
   ...

7.  Main Body

   The main body of the HTML document is processed according to the
   rules in Section 9.

8.  Back Matter

   The back matter of the HTML document includes an index (if
   generated), information about the authors, and further information
   about the document itself.

8.1.  Index

   The index will be produced at the end of the document (before as dictated by the
   author information) RFC Editor's Style
   Guide [RFC-STYLE] if and only if the XML document's <rfc> element has
   an indexInclude "indexInclude" attribute with the value "true", "true" and there is one or
   more <iref> elements in the document.

8.1.1.  Index Contents

   The index section will start with an <h2> heading containing the text
   "Index", followed by links to each of the lettered portions of the
   index.  Links are not generated for letters that do not occur as the
   first letter of an index item.

   For example:

   <h2>Index</h2>
   <div class="index">
     <div class="indexIndex">
       <a href="#rfc.index.C">C</a>
       <a href="#rfc.index.P">P</a>
     </div>
     ...

8.1.2.  Index Letters

   The index letter is followed by a <ul> tag that contains a an <li> tag
   for each first letter represented in the index.  This <li> tag has
   the class "indexChar", "indexChar" and contains an <a> tag with the id pointed to
   by the index letter, letter as well as an href "href" attribute to itself.  The
   <li> tag also includes a <ul> tag that will contain the index items.

   For example:

   <ul>
     <li class="indexChar">
       <a href="#rfc.index.C" id="rfc.index.C">C</a>
       <ul>
         <!-- items go here -->
       </ul>
     </li>
     ...

8.1.3.  Index Items

   Each index item can have multiple <iref> elements to point to, all
   with the same item attribute.  Each index item is represented by an
   <li> tag of class "indexItem" containing a <span> of class "irefItem"
   for the item text and one of class "irefRefs" for the generated
   references (if there is at least one reference to the item not having
   a subitem).  Each generated reference contains an <a> tag containing
   the section number where the <iref> was is found, with an "href"
   attribute pointing to the "irefid" attribute of the <iref> element
   from the XML document.  If the primary attribute of the <iref>
   element has the value "true", the <a> element in the HTML document
   will have the class "indexPrimary".  Commas may be used to separate
   the generated references.

   For example:

   <li class="indexItem">
     <span class="irefItem">Bullets</span>
     <span class="irefRefs">
       <a class="indexPrimary" href="#s-Bullets-1">2</a>,
       <a href="#s-Bullets-2">2</a>
     </span>
     <!-- subitems go here -->
   </li>
   ...

8.1.4.  Index Sub-items Subitems

   If an index item has at least one subitem, the <li> of that item will
   contain a <ul>, with one <li> for each subitem, of class
   "indexSubItem".  Each  The format for each subitem is formatted similarly similar to that used
   for items, except the class of the first <span> tag is "irefSubItem".

   For example:

   <ul>
     <li class="indexSubItem">
       <span class="irefSubItem">Ordered</span>
       <span class="irefRefs">
         <a href="#s-Bullets-Ordered-1">2</a>
       </span>
     </li>
   </ul>
   ...

8.2.  Authors' Addresses Section

   At the end of the document, author information will be included
   inside an HTML <section> element whose id "id" attribute is "author-
   addresses".  The class names of the constituent HTML tags have been
   chosen to match the class names in [HCARD].

   The information for each author will be separated by an HTML <hr>
   element with class "addr" "addr".

   <section id="author-addresses">
     <h2>
       <a class="selfRef" href="#author-addresses">
         Authors' Addresses
       </a>
     </h2>
     <address class="vcard">
       <div class="nameRole"><span class="fn">Joe Hildebrand</span>
         (<span class="role">editor</span>)</div>
       <div class="org">Cisco Systems, Inc.</div>
     </address>
     <hr class="addr">
     <address class="vcard">
       <div class="nameRole"><span class="fn">Heather Flanagan</span>
         (<span class="role">editor</span>)</div>
       <div class="org">RFC Series Editor</div>
     </address>
   </section>

8.3.  Document Information

   A few bits of metadata about the document that are less important to
   most readers are included after the author information.  These are
   gathered together into a <div> of class "docInfo".

   The finalized time is copied from the <rfc> element's prepTime "prepTime"
   attribute.  The rendered time is the time that this HTML was
   generated.

   For example:

   <div class="docInfo">
     <span class="finalized">
       Finalized: <time
       datetime="2015-04-29T18:59:08Z">2015-04-29T18:59:08Z</time>
     </span>
     <span class="rendered">
       Rendered: <time
       datetime="2015-04-29T18:59:10Z">2015-04-29T18:59:10Z</time>
     </span>
   </div>

9.  Elements

   This section describes how each of the XML elements from
   [I-D.iab-xml2rfc] [RFC7991] is
   rendered to HTML.  Many of the descriptions have examples to clarify
   how elements will be rendered.

9.1.  <abstract>

   The abstract is rendered similarly in a similar fashion to a <section> with
   anchor="abstract" and <name>Abstract</name>, but without a section
   number.

   <section id="abstract">
     <h2><a href="#abstract" class="selfRef">Abstract</a></h2>
     <p id="s-abstract-1">This document defines...
       <a href="#s-abstract-1" class="pilcrow">&para;</a>
     </p>
   </section>

9.2.  <address>

   This element is used in the Authors' Addresses. Addresses section.  It is
   rendered as an HTML <address> tag of class "vcard".  If none of the
   descendant XML elements has an "ascii" attribute, the <address> HTML
   tag includes the HTML rendering of each of the descendant XML
   elements.  Otherwise, the <address> HTML tag includes an HTML <div>
   tag of class "ascii" (containing the HTML rendering of the ASCII
   variants of each of the descendant XML elements), an HTML <div> tag
   of class "alternative-contact", (containing the text "Alternate
   contact information:"), and an HTML <div> tag of class "non-ascii"
   (containing the HTML rendering of the non-ASCII variants of each of
   the descendant XML elements).

   Note: The the following example shows some ASCII equivalents that are the
   same as their nominal equivalents for clarity; normally normally, the ASCII
   equivalents would not be included for these cases.

   <address class="vcard">
     <div class="ascii">
       <div class="nameRole"><span class="fn">Joe Hildebrand</span>
         (<span class="role">editor</span>)</div>
       <div class="org">Cisco Systems, Inc.</div>
     </div>
     <div class="alternative-contact">
       Alternate contact information:
     </div>
     <div class="non-ascii">
       <div class="nameRole"><span class="fn">Joe Hildebrand</span>
         (<span class="role">editor</span>)</div>
       <div class="org">Cisco Systems, Inc.</div>
     </div>
   </address>

9.3.  <annotation>

   This element is rendered as the text ", " (a comma and a space)
   followed by a span <span> of class "annotation" at the end of a
   <reference> element, the span <span> containing appropriately-transformed appropriately transformed
   elements from the children of the <annotation> tag.

   ,

    <span class="annotation">Some <em>thing</em>.</span>

9.4.  <area>

   Not currently rendered to HTML.

9.5.  <artwork>

   Artwork can either consist of either inline text or SVG.  If the artwork is
   not inside a <figure> element, a pilcrow (Section 5.2) is included.
   Inside a <figure> element, the figure title serves the purpose of the
   pilcrow.  If the "align" attribute has the value "right", the CSS
   class "alignRight" will be added.  If the "align" attribute has the
   value "center", the CSS class "alignCenter" will be added.

9.5.1.  Text Artwork

   Text artwork is rendered inside an HTML <pre> element, which is
   contained by a <div> element for consistency with SVG artwork.  Note
   that CDATA blocks are not a part of HTML, so all angle brackets and
   ampersands (i.e., <, >, and & &) must be escaped as &lt;, &gt;, and
   &amp;, respectively.

   The <div> element will have CSS classes of "artwork", "art-text", and
   "art-" prepended to the value of the <artwork> element's "type"
   attribute, if it exists.

   <div class="artwork art-text art-ascii-art"  id="s-1-2">
     <pre>
    ______________
   &lt; hello, world &gt;
    --------------
     \   ^__^
      \  (oo)\_______
         (__)\       )\/\
             ||----w |
             ||     ||
     </pre>
     <a class="pilcrow" href="#s-1-2">&para;</a>
   </div>

9.5.2.  SVG Artwork

   SVG artwork will be included inline.  The SVG is wrapped in a <div>
   element with CSS classes "artwork" and "art-svg".

   If the SVG artwork "artwork" element is a child of <figure> and the artwork
   is specified as align='right', align="right", an empty HTML <span> element is added
   directly after the <svg> element, in order to get right alignment to
   work correctly in HTML rendering engines that do not support the
   flex-box model.

   Note: the alt "alt" attribute of <artwork> is not currently used for SVG;
   instead, the <title> and <desc> tags are used in the SVG.

   <div class="artwork art-svg" id="s-2-17">
     <svg width="100" height="100" xmlns="http://www.w3.org/2000/svg">
       <desc>Alt text here</desc>
       <circle
         cx="50" cy="50" r="40"
         stroke="green" stroke-width="4" fill="yellow" />
     </svg>
     <a href="#s-2-17" class="pilcrow">&para;</a></pre> class="pilcrow">&para;</a>
   </div>

9.5.3.  Other Artwork

   Other artwork will have a src "src" attribute that uses the "data" URI
   scheme defined in [RFC2397].  Such artwork is rendered in an HTML
   <img> element.  Note: the HTML <img> element does not have a closing
   slash.

   Note: such images are not yet allowed by the RFC Series Editor, in RFCs even though the format
   supports them.  The RFC Series Editor may allow a  A limited set of "data:" mediatypes for artwork may
   be allowed in the future.

   <div class="artwork art-logo" id="s-2-58">
     <img alt="IETF logo"
          src="data:image/gif;charset=utf-8;base64,...">
     <a class="pilcrow" href="#s-2-58">&para;</a>
   </div>

9.6.  <aside>

   This element is rendered as an HTML <aside> element, with all child
   content appropriately transformed.

   <aside id="s-2.1-2">
     <p id="s-2.1-2.1">
       A little more than kin, and less than kind.
       <a class="pilcrow" href="#s-2.1-2.1">&para;</a>
     </p>
   </aside>

9.7.  <author>

   The <author> element is used in several places in the output.
   Different rendering is used for each.

9.7.1.  Authors in Document Information

   As seen in the Document Information at the beginning of the HTML,
   each document author is rendered as an HTML <div> tag of class
   "author".

   Inside the <div class="author"> HTML tag, the author's initials and
   surname (or the fullname, if it exists and the others do not) will be
   rendered in an HTML <div> tag of class "author-name".  If the
   <author> contains "asciiInitials" and "asciiSurname" attributes, or
   contains as "asciiFullname" attribute, the author's name is rendered
   twice, with the first being the non-ASCII version, wrapped in an HTML
   <span> tag of class "non-ascii", followed by the ASCII version
   wrapped in an HTML <span> tag of class "ascii", wrapped in
   parentheses.  If the <author> has a "role" attribute of "editor", the
   <div class="author-name"> will also contain the text ", " (comma,
   space), followed by an HTML <span> tag of class "editor", which
   contains the text "Ed.".

   If the <author> element contains an <organization> element, it is
   also rendered inside the <div class="author"> HTML tag.

   <div class="author">
     <div class="author-name">
       H. Flanagan,
       <span class="editor">Ed.</span></div>
     <div class="org">Test Org</div>
   </div>
   <div class="author">
     <div class="author-name">
       <span class="non-ascii">Hildebrand</span>
       (<span class="ascii">HILDEBRAND</span>)
     </div>
     <div class="org">
       <span class="non-ascii">Test Org</span>
       (<span class="ascii">TEST ORG</span>)
     </div>
   </div>

9.7.2.  Authors of this document This Document

   As seen in the Authors' Addresses, Addresses section, at the end of the HTML,
   each document author is rendered into an HTML <address> element with
   the CSS class "vcard".

   The HTML <address> element will contain an HTML <div> with CSS class
   "nameRole".  That div will contain an HTML <span> element with CSS
   class "fn" containing the value of the "fullname" attribute of the
   <author> XML element, element and an HTML <span> element with CSS class "role"
   containing the value of the "role" attribute of the <author> XML
   element (if there is a role).  Parentheses will surround the <span
   class="role">, if it exists.

   <address class="vcard">
     <div class="nameRole">
       <span class="fn">Joe Hildebrand</span>
       (<span class="role">editor</span>)
     </div>
     ...

   After the name, the <organization> and <address> child elements of
   the author are rendered inside the HTML <address> tag.

   When the <author> element element, or any of its descendant elements elements, has any
   attribute that start starts with "ascii", all of the author information is
   displayed twice.  The first version is wrapped in an HTML <div> tag
   with class "ascii"; this version prefers the ASCII version of
   information, such as "asciiFullname", but falls back on the non-ASCII
   version if the ASCII version doesn't exist.  The second version is
   wrapped in an HTML <div> tag with class "non-ascii"; this version
   prefers the non-ASCII version of information, such as "fullname", but
   falls back on the ASCII version if the non-ASCII version does not
   exist.  Between these two HTML <div>s, a third <div> is inserted,
   with class "alternative-contact", containing the text "Alternate
   contact information:".

   <address class="vcard">
     <div class="ascii">
       <div class="nameRole">
         <span class="fn">The ASCII name</span>
       </div>
     </div>
     <div class="alternative-contact">
       Alternate contact information:
     </div>
     <div class="non-ascii">
       <div class="nameRole">
         <span class="fn">The non-ASCII name</span>
         (<span class="role">editor</span>)</div> class="role">editor</span>)
       </div>
     </div>
   </address>

9.7.3.  Authors of references References

   In the output generated from a reference element, author tags are
   rendered inside an HTML <span> element with CSS class "refAuthor".
   See [RFC7322], section Section 4.8.6.2 for which sections of the [RFC7322] for guidance on how author name names are
   to use. appear.

   <span class="refAuthor">Flanagan, H.</span> and
   <span class="refAuthor">N. Brownlee</span>

9.8.  <back>

   If there is exactly one <references> child, renders render that child
   similarly in a
   similar way to a <section>.  If there are more than one <references>
   child, renders
   children, render as a <section> whose name is "References",
   containing a <section> for each <references>. <references> child.

   After any <references> sections, renders render each <section> child of
   <back> as
   appendices. an appendix.

   <section id="n-references">
     <h2 id="s-2">
       <a class="selfRef" href="#s-2">2.</a>
       <a class="selfRef" href="#n-references">References</a>
     </h2>
     <section id="n-normative">
       <h3 id="s-2.1">
         <a class="selfRef" href="#s-2.1">2.1.</a>
         <a class="selfRef" href="#n-normative">Normative</a>
       </h3>
       <dl class="reference"></dl>
     </section>
     <section id="n-informational">
       <h3 id="s-2.2">
         <a class="selfRef" href="#s-2.2">2.2.</a>
         <a class="selfRef" href="#n-informational">Informational</a>
       </h3>
       <dl class="reference"></dl>
     </section>
   </section>
   <section id="n-unimportant">
     <h2 id="s-A">
       <a class="selfRef" href="#s-A">Appendix A.</a>
       <a class="selfRef" href="#n-unimportant">Unimportant</a>
     </h2>
   </section>

9.9.  <bcp14>

   This element marks up words like MUST and SHOULD [BCP14] with an HTML
   <span> element with the CSS class "bcp14".

   You <span class="bcp14">MUST</span> be joking.

9.10.  <blockquote>

   This element renders as the in a way similar to the HTML <blockquote>
   element.  If there is a "cite" attribute, it is copied to the HTML cite
   "cite" attribute.  If there is a "quoteFrom" attribute, it is placed
   inside a <cite> element at the end of the quote, with an <a> element
   surrounding it (if there is a "cite" attribute), linking to the "cite" cited
   URL.

   If the blockquote <blockquote> does not contain another element that gets a
   pilcrow (Section 5.2), a pilcrow is added.

   Note that the "&mdash;" at the beginning of the <cite> element should
   be a proper emdash, which is difficult to show in the current format display of this the
   current format.

   <blockquote id="s-1.2-1"
     cite="http://...">
     <p id="s-1.2-2">Four score and seven years ago our fathers
       brought forth on this continent, a new nation, conceived
       in Liberty, and dedicated to the proposition that all men
       are created equal.
       <a href="#s-1.2-2" class="pilcrow">&para;</a>
     </p>
     <cite>&mdash; <a href="http://...">Abraham Lincoln</a></cite>
   </blockquote>

9.11.  <boilerplate>

   The IPR boilerplate for Status of This Memo and the Copyright statement, together
   commonly referred to as the document appears directly boilerplate, appear after the
   Abstract.  The children of the input <boilerplate> element are
   treated similarly in a similar fashion to unnumbered sections.

   <section id="status-of-this-memo">
     <h2 id="s-boilerplate-1">
       <a href="#status-of-this-memo" class="selfRef">
         Status of this Memo</a>
     </h2>
     <p id="s-boilerplate-1-1">This Internet-Draft is submitted in full
       conformance with the provisions of BCP 78 and BCP 79.
       <a href="#s-boilerplate-1-1" class="pilcrow">&para;</a>
     </p>
   ...

9.12.  <br>

   This element is directly rendered as its HTML counterpart.  Note: in
   HTML, <br> does not have a closing slash.

9.13.  <city>

   This element is rendered as a <span> element with CSS class
   "locality".

   <span class="locality">Guilford</span>

9.14.  <code>

   This element is rendered as a <span> element with CSS class "postal-
   code".

   <span class="postal-code">GU16 7HF<span>

9.15.  <country>

   This element is rendered as a <div> element with CSS class "country-
   name".

   <div class="country-name">England</div>

9.16.  <cref>

   This element is rendered as a <span> element with CSS class "cref".
   Any anchor is copied to the id "id" attribute.  If there is a source
   given, it is contained inside the cref span "cref" <span> element with another span
   <span> element of class "crefSource".

   <span class="cref" id="crefAnchor">Just a brief comment
   about something that we need to remember later.
   <span class="crefSource">--life</span></span>

9.17.  <date>

   This element is rendered as the HTML <time> element.  If the "year",
   "month", or "day" attribute is included on the XML element, an
   appropriate "datetime" element will be generated in HTML.

   If this date is a child of the document's <front> element, it gets
   the CSS class "published".

   If this date is inside a <reference> element, it gets the CSS class
   "refDate".

   <time datetime="2014-10" class="published">October 2014</time>

9.18.  <dd>

   This element is directly rendered as its HTML counterpart.

9.19.  <displayreference>

   Does

   This element does not affect the HTML output, but it is used in the
   generation of the <reference>, <referencegroup>, <relref>, and <xref>. <xref>
   elements.

9.20.  <dl>

   This element is directly rendered as its HTML counterpart.

   If the hanging attribute is "false", add the "dlParallel" class, else
   add the "dlHanging" class.

   If the spacing attribute is "compact", add the "dlCompact" class.

9.21.  <dt>

   This element is directly rendered as its HTML counterpart.

9.22.  <em>

   This element is directly rendered as its HTML counterpart.

9.23.  <email>

   As shown in Section 8.2 this

   This element is rendered as an HTML <div> containing the string
   "Email:" and an HTML <a> element, element with the "href" attribute set to the
   equivalent "mailto:" URI, a CSS class of "email", and the contents
   set to the email address.  If this is the version of the address with
   ASCII, the "ascii" attribute is preferred to the element text.

   <div>
     <span>Email:</span>
     <a class="email" href="mailto:joe@example.com">joe@example.com</a>
   </div>

9.24.  <eref>

   This element is rendered as an HTML <a> element, with the "href"
   attribute set to the value of the "target" attribute, attribute and the CSS
   class of "eref".

   <a href="https://..." class="eref">the text</a>

9.25.  <figure>

   This element renders as the HTML <figure> element, containing the
   artwork or sourcecode indicated and an HTML <figcaption> element.
   The <figcaption> element will contain an <a> element around the
   figure number.  It will also contain another <a> element with CSS
   class "selfRef" around the figure name, if a name was given.

   <figure id="f-1">
     ...
     <figcaption>
       <a href="#f-1">Figure 1.</a>
       <a href="#n-it-figures" id="n-it-figures" class="selfRef">
         It figures
       </a>
     </figcaption>
   </figure>

9.26.  <front>

   See Document Information. "Document Information" (Section 6.5) for information on this
   element.

9.27.  <iref>

   This element is rendered as an empty <> tag of class iref, "iref", with an id
   "id" attribute consisting of the <iref> element's irefid: "irefid" attribute:

   <span class="iref" id="s-Paragraphs-first-1"/>

9.28.  <keyword>

   Each of these elements <keyword> element renders its text into the <meta> keywords in
   the document's header, separated by commas.

   <meta name="keywords" content="html,css,rfc">

9.29.  <li>

   This element is rendered as its HTML counterpart.  However  However, if there
   is no contained element that had has a pilcrow (Section 5.2) attached, a
   pilcrow is added.

   <li id="s-2-7">Item <a href="#s-2-7" class="pilcrow">&para;</a></li>

9.30.  <link>

   This element is rendered as its HTML counterpart, in the HTML header.

9.31.  <middle>

   This element does not add any direct output to HTML.

9.32.  <name>

   This element is never rendered directly, but instead directly; it is only rendered when
   considering
   its a parent element, such as <figure>, <references>,
   <section>, or <table>.

9.33.  <note>

   This element is rendered similarly to like a <section>, <section> element, but without a
   section number, number and with the CSS class of "note".  If the
   "removeInRFC" attribute is set to "yes", the generated <div> element
   will also include the CSS class "rfcEditorRemove".

   <section id="s-note-1" class="note rfceditor-remove"> rfcEditorRemove">
     <h2>
       <a href="#n-editorial-note" class="selfRef">Editorial Note</a>
     </h2>
     <p id="s-note-1-1">
       Discussion of this draft takes place...
       <a href="#s-note-1-1" class="pilcrow">&para;</a>
     </p>
   </section>

9.34.  <ol>

   The output created from an <ol> element depends upon the style "style"
   attribute.

   If the spacing "spacing" attribute has the value "compact", a CSS class of
   "olCompact" will be added.

   The group attribute is not copied; the input XML should have start
   values added by a prep tool for all grouped <ol> elements.

9.34.1.  Percent styles Styles

   If the style attribute includes the character "%", the output is a
   <dl> tag with the class "olPercent".  Each contained li <li> element is
   emitted as a <dt>/<dd> pair, with the generated label in the <dt> and
   the contents of the li <li> in the <dd>.

   <dl class="olPercent">
     <dt>Requirement xviii:</dt>
     <dd>Wheels on a big rig</dd>
   </dl>

9.34.2.  Standard styles Styles

   For all other styles, an <ol> tag is emitted, with any style "style"
   attribute turned into the equivalent HTML type attribute.

   <ol class="compact" type="I" start="18">
     <li>Wheels on a big rig</li>
   </ol>

9.35.  <organization>

   As shown in Section 8.2 this

   This element is rendered as an HTML <div> tag with CSS class "org".

   If the element contains the "ascii" attribute, the organization name
   is rendered twice, twice: once with the non-ASCII version wrapped in an HTML
   <span> tag of class "non-ascii", "non-ascii" and then as the ASCII version wrapped
   in an HTML <span> tag of class "ascii" wrapped in parentheses.

   <div class="org">
     <span class="non-ascii">Test Org</span>
     (<span class="ascii">TEST ORG</span>)
   </div>

9.36.  <phone>

   As shown in Section 8.2 this

   This element is rendered as an HTML <div> tag containing the string
   "Phone:" (wrapped in a span), an HTML <a> tag with CSS class "tel"
   containing the phone number (and an href with a corresponding "tel:" URI)
   URI), and an HTML <span> with CSS class "type" containing the string
   "VOICE".

   <div>
     <span>Phone:</span>
     <a class="tel" href="tel:+1-720-555-1212">+1-720-555-1212</a>
     <span class="type">VOICE</span>
   </div>

9.37.  <postal>

   This element renders as an HTML <div> with CSS class "adr", unless it
   contains one or more <postalLine> child elements; in which case case, it
   renders as an HTML <pre> element with CSS class "label".

   When there is no <postalLine> child, the following child elements are
   rendered into the HTML:

   o  Each <street> is rendered

   o  A <div> that includes:

      *  The rendering of all <city> elements

      *  A comma and a space: ", "

      *  The rendering of all <region> elements
      *  Whitespace

      *  The rendering of all <code> elements

   o  The rendering of all <country> elements

   <div class="adr">
     <div class="street-address">1 Main Street</div>
     <div class="street-address">Suite 1</div>
     <div>
       <span class="city">Denver</span>,
       <span class="region">CO</span>
       <span class="postal-code">80212</span>
     </div>
     <div class="country-name">US</div> class="country-name">United States of America</div>
   </div>

9.38.  <postalLine>

   This element renders as the text contained by the element, followed
   by a newline.  However, the last <postalLine> in a given <postal>
   element should not be followed by a newline.  For example:

   <postal>
     <postalLine>In care of:</postalLine>
     <postalLine>Computer Sciences Division</postalLine>
   </postal>

   Would be rendered as:

   <pre class="label">In care of:
   Computer Sciences Division</pre>

9.39.  <refcontent>

   This element renders as an HTML <span> with CSS class "refcontent". "refContent".

   <span class="refContent">Self-published pamphlet</span>

9.40.  <reference>

   If the parent of this element is not a <referencegroup>, this element
   will render as a <dt> <dd> pair, pair with the defined term being the
   reference "anchor" attribute surrounded by square brackets, brackets and the
   definition including the correct set of bibliographic information as
   specified by [RFC7322].  The <dt> element will have an "id" attribute
   of the reference anchor.

   <dl class="reference">
     <dt id="RFC5646">[RFC5646]</dt>
     <dd>
       <span class="refAuthor">Phillips, A.</span>
       <span>and</span>
       <span class="refAuthor">M. Davis</span>
       <span class="refTitle">"Tags for Identifying Languages"</span>,
       ...
     </dd>
   </dl>

   If this element is the child of a <referencegroup>, this element renders as a <div>
   of class "refInstance", "refInstance" whose "id" attribute is the value of the source
   <source> element's "anchor" attribute.

   <div class="refInstance" id="RFC5730">
     ...
   </div>

9.41.  <referencegroup>

   A <referencegroup> is translated into a <dt> <dd> pair, with the
   defined term being the referencegroup "anchor" attribute surrounded
   by square brackets, and the definition containing the translated
   output of all of the child <reference> elements.

   <dt id="STD69">[STD69]</dt>
   <dd>
     <div class="refInstance" id="RFC5730">
       <span class="refAuthor">Hollenbeck, S.</span>
       ...
     </div>
     <div class="refInstance" id="RFC5731">
       <span class="refAuthor">Hollenbeck, S.</span>
       ...
     </div>
     ...
   </dd>

9.42.  <references>

   If there is at exactly one <references> element, a section is added
   to the document, continuing with the next section number after the
   last top-level <section> in <middle>.  The <name> element of the
   <references> element is used as the section name.

   <section id="n-my-references">
     <h2 id="s-3">
       <a href="#s-3" class="selfRef">3.</a>
       <a href="#n-my-references class="selfRef">My References</a>
     </h2>
     ...
   </section>

   If there is more than one <references> element, an HTML <section>
   element is created to contain a sub-section subsection for each of the
   <references>.  The section number will be the next section number
   after the last top-level <section> in <middle>.  The name of this
   section will be "References", and it's its "id" attribute will be
   "n-references".

   <section id="n-references">
     <h2 id="s-3">
       <a href="#s-3" class="selfRef">3.</a>
       <a href="#n-references" class="selfRef">References</a>
     </h2>
     <section id="n-informative-references">
       <h3 id="s-3.1">
         <a href="#s-3.1" class="selfRef">3.1.</a>
         <a href="#n-informative-references" class="selfRef">
           Informative References</a></h3>
       <dl class="reference">...
       </dl>
     </section>
     ...
   </section>

9.43.  <region>

   This element is rendered as a <span> tag with CSS class "region".

   <span class="region">Colorado<span> class="region">Colorado</span>

9.44.  <relref>

   This element is rendered as an HTML <a> tag with CSS class "relref"
   and "href" attribute of the "derivedLink" attribute of the element.
   Different values of the "displayFormat" attribute cause the text
   inside that HTML <a> tag to change, as well as change and cause extra text to be
   generated.  Some values of the "displayFormat" attribute also cause
   another HTML <a> tag to be rendered with CSS class "xref" and an
   "href" of "#" and the "target" attribute (modified by any applicable
   <displayreference> XML element) and text inside of the "target"
   attribute (modified by any applicable <displayreference> XML
   element).  When used, this <a class='xref'> HTML tag is always
   surrounded by square brackets, like for example, "[<a class='xref'
   href='#foo'>foo</a>]".

9.44.1.  displayFormat='of'

   The output is an <a class='relref'> HTML tag, with contents of
   "Section " and the value of the "section" attribute.  This is
   followed by the word "of" (surrounded by whitespace).  This is
   followed by the <a class='xref'> HTML tag (surrounded by square
   brackets).

   For example, with an input of:

   See <relref section="2.3" target="RFC7878" target="RFC9999" displayFormat="of"
   derivedLink="http://www.rfc-editor.org/info/rfc7878#s-2.3"/>
   derivedLink="http://www.rfc-editor.org/info/rfc9999#s-2.3"/>
   for an overview.

   The HTML generated will be:

   See <a class="relref"
   href="http://www.rfc-editor.org/info/rfc7878#s-2.3">Section
   href="http://www.rfc-editor.org/info/rfc9999#s-2.3">Section
   2.3</a> of [<a class="xref" href="#RFC7878">RFC7878</a>] href="#RFC9999">RFC9999</a>]
   for an overview.

9.44.2.  displayFormat='comma'

   The output is an <a class='xref'> HTML tag (wrapped by square
   brackets), followed by a comma (","), followed by whitespace,
   followed by an <a class='relref'> HTML tag, with contents of
   "Section " and the value of the "section" attribute.

   For example, with an input of:

   See <relref section="2.3" target="RFC7878" target="RFC9999" displayFormat="comma"
   derivedLink="http://www.rfc-editor.org/info/rfc7878#s-2.3"/>,
   derivedLink="http://www.rfc-editor.org/info/rfc9999#s-2.3"/>,
   for an overview.

   The HTML generated will be:

   See [<a class="xref" href="#RFC7878">RFC7878</a>], href="#RFC9999">RFC9999</a>], <a class="relref"
   href="http://www.rfc-editor.org/info/rfc7878#s-2.3">Section
   href="http://www.rfc-editor.org/info/rfc9999#s-2.3">Section 2.3</a>,
   for an overview.

9.44.3.  displayFormat='parens'

   The output is an <a> element with "href" attribute whose value is the
   value of the "target" attribute prepended by "#", and whose content
   is the value of the "target" attribute; the entire element is wrapped
   in square brackets.  This is followed by whitespace.  This is
   followed by an <a> element whose "href" attribute is the value of the
   "derivedLink" attribute and whose content is the value of the
   "derivedRemoteContent" attribute; the entire element is wrapped in
   parentheses.

   For example, if Section 2.3 of RFC 7878 9999 has the title "Protocol
   Overview", for an input of:

   See <relref section="2.3" target="RFC7878" target="RFC9999" displayFormat="parens"
   derivedLink="http://www.rfc-editor.org/info/rfc7878#s-2.3"
   derivedLink="http://www.rfc-editor.org/info/rfc9999#s-2.3"
   derivedRemoteContent="Section 2.3"/> for an overview.

   The HTML generated will be:

   See [<a class="relref" href="#RFC7878">RFC7878</a>] href="#RFC9999">RFC9999</a>]
   (<a class="relref"
   href="http://www.rfc-editor.org/info/rfc7878#s-2.3">Section
   href="http://www.rfc-editor.org/info/rfc9999#s-2.3">Section
   2.3</a>) for an overview.

9.44.4.  displayFormat='bare'

   The output is an <a> element whose "href" attribute is the value of
   the "derivedLink" attribute and whose content is the value of the
   "derivedRemoteContent" attribute.

   For this input:

   See <relref section="2.3" target="RFC7878" target="RFC9999" displayFormat="bare"
   derivedLink="http://www.rfc-editor.org/info/rfc7878#s-2.3"
   derivedLink="http://www.rfc-editor.org/info/rfc9999#s-2.3"
   derivedRemoteContent="Section 2.3"/> and ...

   The HTML generated will be:

   See <a class="relref"
   href="http://www.rfc-editor.org/info/rfc7878#s-2.3">Section
   href="http://www.rfc-editor.org/info/rfc9999#s-2.3">Section
   2.3</a> and ...

9.45.  <rfc>

   Various attributes of this element are represented in different parts
   of the HTML document.

9.46.  <section>

   This element is rendered as an HTML <section> element, containing an
   appropriate level HTML heading element (<h2>-<h6>).  That heading
   element contains an <a> element around the part number (pn), if
   applicable (for instance, <abstract> does not get a section number).
   Another <a> element is included with the section's name.

   <section id="intro">
     <h2 id="s-1">
       <a href="#s-1" class="selfRef">1.</a>
       <a href="#intro" class="selfRef">Introduction</a>
     </h2>
     <p id="s-1-1">Paragraph <a href="#s-1-1" class="pilcrow">&para;</a>
     </p>
   </section>

9.47.  <seriesInfo>

   This element is rendered in an HTML <span> element with CSS name
   "seriesInfo".

   <span class="seriesInfo">RFC 5646</span>

9.48.  <sourcecode>

   This element is rendered in an HTML <pre> element with a CSS class of
   "sourcecode".  Note that CDATA blocks do not work consistently in
   HTML, so all <, >, and & must be escaped as &lt;, &gt;, and &amp;,
   respectively.  If the input XML has a "type" attribute, another CSS
   class of "lang-" and the type is added.

   If the sourcecode is not inside a <figure> element, a pilcrow
   (Section 5.2) is included.  Inside a <figure> element, the figure
   title serves the purpose of the pilcrow.

   <pre class="sourcecode lang-c">
   #include &lt;stdio.h&gt;

   int main(void)
   {
       printf(&quot;hello, world\n&quot;);
       return 0;
   }
   </pre>

9.49.  <street>

   This element renders as an HTML <div> element with CSS class "street-
   address".

   <div class="street-address">1899 Wynkoop St, Suite 600</div>

9.50.  <strong>

   This element is directly rendered as its HTML counterpart.

9.51.  <sub>

   This element is directly rendered as its HTML counterpart.

9.52.  <sup>

   This element is directly rendered as its HTML counterpart.

9.53.  <t>

   This element is rendered as an HTML <p> element.  A pilcrow
   (Section 5.2) is included.

   <p id="s-1-1">A paragraph.
     <a href="#s-1-1" class="pilcrow">&para;</a></p>

9.54.  <table>

   This element is directly rendered as its HTML counterpart.

9.55.  <tbody>

   This element is directly rendered as its HTML counterpart.

9.56.  <td>

   This element is directly rendered as its HTML counterpart.

9.57.  <tfoot>

   This element is directly rendered as its HTML counterpart.

9.58.  <th>

   This element is directly rendered as its HTML counterpart.

9.59.  <thead>

   This element is directly rendered as its HTML counterpart.

9.60.  <title>

   The title of the document appears in an a <title> element in the <head>
   element, as shown described in Section 6.3.2.

   The title also appears in an <h1> element, element and follows directly after
   the Document Information.  The <h1> element has an id "id" attribute
   with value "title".

   <h1 id="title">HyperText Markup Language Request For
       Comments Format</h1>

   Inside a reference, the title is rendered as an HTML <span> tag with
   CSS class "refTitle".  The text is surrounded by quotes inside the
   <span>.

   <span class="refTitle">"Tags for Identifying Languages"</span>

9.61.  <tr>

   This element is directly rendered as its HTML counterpart.

9.62.  <tt>

   This element is rendered as an HTML <code> element.

9.63.  <ul>

   This element is directly rendered as its HTML counterpart.  If the
   "spacing" attribute has the value "compact", a CSS class of
   "ulCompact" will be added.  If the "empty" attribute has the value
   "true", a CSS class of "ulEmpty" will be added.

9.64.  <uri>

   As shown in Section 8.2 this

   This element is rendered as an HTML <div> containing the string
   "URI:" and an HTML <a> element, element with the "href" attribute set to the
   linked URI, CSS class of "url" [sic], (note that the value is "url", not
   "uri" as one might expect), and the contents set to the linked URI.

   <div>URI:
     <a href="http://www.example.com"
        class="url">http://www.example.com</a>
   </div>

9.65.  <workgroup>

   This element does not add any direct output to HTML.

9.66.  <xref>

   This element is rendered as an HTML <a> element containing an
   appropriate local link as the "href" attribute.  The value of the
   "href" attribute is taken from the "target" attribute, prepended by
   "#".  The <a> element generated will have class "xref".  The contents
   of the <a> element are the value of the "derivedContent" attribute.
   If the "format" attribute has the value "default", and the "target"
   attribute points to a <reference> or <referencegroup> element, then
   the generated <a> element is surrounded by square brackets in the
   output.

   <a class="xref" href="#target">Table 2</a>

   or

   [<a class="xref" href="#RFC1234">RFC1234</a>]

9.67.  <svg xmlns='http://www.w3.org/2000/svg'>

   This element is rendered as part of the <artwork> element.  The
   "xmlns='http://www.w3.org/2000/svg'" namespace declaration should be
   included, and the SVG should be serialized as well-formed XML, even
   for tags that would otherwise not need closing in HTML5.

10.  IANA Considerations

   This document contains no actions for IANA

11.  Security Considerations

   Since RFCs are sometimes exchanged outside the normal Web sandboxing
   mechanism (such as using the "rsync" program to a mirror site) then
   loaded from a local file, more care must be taken with the HTML than
   is ordinary on the web.

12.  Acknowledgments

   Heather Flanangan was an early co-author of this document and helped
   its formation.  The authors gratefully acknowledge the contributions
   of: Patrick Linskey, and the members of the RFC Format Design Team
   (Nevil Brownlee, Sandy Ginoza, Tony Hansen, Ted Lemon, Julian
   Reschke, Adam Roach, Alice Russo, Robert Sparks, Dave Thaler).

13.

11.  References

13.1.

11.1.  Normative References

   [BCP14]    Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997,
              <http://www.rfc-editor.org/info/bcp14>.

   [RFC2397]  Masinter, L., "The "data" URL scheme", RFC 2397,
              DOI 10.17487/RFC2397, August 1998,
              <http://www.rfc-editor.org/info/rfc2397>.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November
              2003, <http://www.rfc-editor.org/info/rfc3629>.

   [RFC5646]  Phillips, A., Ed. and M. Davis, Ed., "Tags for Identifying
              Languages", BCP 47, RFC 5646, DOI 10.17487/RFC5646,
              September 2009, <http://www.rfc-editor.org/info/rfc5646>.

   [RFC7322]  Flanagan, H. and S. Ginoza, "RFC Style Guide", RFC 7322,
              DOI 10.17487/RFC7322, September 2014,
              <http://www.rfc-editor.org/info/rfc7322>.

   [I-D.iab-rfc-css]
              Flanagan, H., "CSS Requirements for RFCs", draft-iab-rfc-
              css-00 (work in progress), January 2016.

   [I-D.iab-xml2rfc]

   [RFC7991]  Hoffman, P., "The "xml2rfc" version Version 3 Vocabulary", draft-
              iab-xml2rfc-04 (work in progress), June 2016.

   [W3C.REC-html5-20141028]
              Hickson, I., Berjon, R., Faulkner, S., Leithead, T.,
              Navara, E., O&#039;Connor, E., and S. Pfeiffer, "HTML5",
              World Wide Web Consortium Recommendation REC-
              html5-20141028, October 2014,
              <http://www.w3.org/TR/2014/REC-html5-20141028>.
              RFC 7991, DOI 10.17487/RFC7991, December 2016,
              <http://www.rfc-editor.org/info/rfc7991>.

   [RFC7993]  Flanagan, H., "Cascading Style Sheets (CSS) Requirements
              for RFCs", RFC 7993, DOI 10.17487/RFC7993, December 2016,
              <http://www.rfc-editor.org/info/rfc7993>.

   [W3C.REC-CSS2-20110607]
              Bos, B., Celik, T., Hickson, I., and H. Lie, "Cascading
              Style Sheets Level 2 Revision 1 (CSS 2.1) Specification",
              World Wide Web Consortium Recommendation REC-
              CSS2-20110607,
              REC-CSS2-20110607, June 2011,
              <http://www.w3.org/TR/2011/REC-CSS2-20110607>.

13.2.  Informative References

   [W3C.WD-css3-page-20130314]
              Grant, M., Etemad,

   [W3C.REC-html5-20141028]
              Hickson, I., Berjon, R., Faulkner, S., Leithead, T.,
              Navara, E., Lie, H., O'Connor, T., and S. Sapin, "CSS Paged
              Media Module Level 3", Pfeiffer, "HTML5", World
              Wide Web Consortium WD WD-
              css3-page-20130314, March 2013,
              <http://www.w3.org/TR/2013/WD-css3-page-20130314>. Recommendation
              REC-html5-20141028, October 2014,
              <http://www.w3.org/TR/2014/REC-html5-20141028>.

11.2.  Informative References

   [HCARD]    Celik, T., "hCard 1.0", 2015,
              <http://microformats.org/wiki/hcard>.

   [RFC-STYLE]
              RFC Editor, "Style Guide",
              <https://www.rfc-editor.org/styleguide/>.

   [RFC6949]  Flanagan, H. and N. Brownlee, "RFC Series Format
              Requirements and Future Development", RFC 6949,
              DOI 10.17487/RFC6949, May 2013,
              <http://www.rfc-editor.org/info/rfc6949>.

   [I-D.iab-rfcv3-preptool]

   [RFC7990]  Flanagan, H., "RFC Format Framework", RFC 7990,
              DOI 10.17487/RFC7990, December 2016,
              <http://www.rfc-editor.org/info/rfc7990>.

   [RFC7998]  Hoffman, P. and J. Hildebrand, "RFC v3 Prep ""xml2rfc" Version 3
              Preparation Tool Description", draft-iab-rfcv3-preptool-01 (work in
              progress), February 2016.

   [I-D.iab-rfc-framework]
              Flanagan, RFC 7998,
              DOI 10.17487/RFC7998, December 2016,
              <http://www.rfc-editor.org/info/rfc7998>.

   [W3C.WD-css3-page-20130314]
              Grant, M., Etemad, E., Lie, H., "RFC and S. Sapin, "CSS Paged
              Media Module Level 3", World Wide Web Consortium
              WD WD-css3-page-20130314, March 2013,
              <http://www.w3.org/TR/2013/WD-css3-page-20130314>.

IAB Members at the Time of Approval

   The IAB members at the time this memo was approved were (in
   alphabetical order):

      Jari Arkko
      Ralph Droms
      Ted Hardie
      Joe Hildebrand
      Russ Housley
      Lee Howard
      Erik Nordmark
      Robert Sparks
      Andrew Sullivan
      Dave Thaler
      Martin Thomson
      Brian Trammell
      Suzanne Woolf

Acknowledgments

   Heather Flanangan was an early coauthor of this document and helped
   its formation.  The authors gratefully acknowledge the contributions
   of: Patrick Linskey and the members of the RFC Format Framework", draft-iab-rfc-
              framework-06 (work in progress), June 2016. Design Team
   (Nevil Brownlee (ISE), Tony Hansen, Ted Lemon, Julian Reschke, Adam
   Roach, Alice Russo, Robert Sparks (Tools Team liaison), and Dave
   Thaler).

Authors' Addresses

   Joe Hildebrand (editor)
   Cisco Systems, Inc.
   Mozilla

   Email: jhildebr@cisco.com joe-ietf@cursive.net

   Paul Hoffman
   ICANN

   Email: paul.hoffman@icann.org