Internet Engineering Task Force (IETF)                           L. Zhou
Internet-Draft
Request for Comments: 8544                                         CNNIC
Intended status:
Category: Standards Track                                        N. Kong
Expires: June 8, 2019
ISSN: 2070-1721                                               Consultant
                                                                  J. Wei
                                                                  J. Yao
                                                                   CNNIC
                                                                J. Gould
                                                          Verisign,
                                                          VeriSign, Inc.
                                                        December 5, 2018
                                                              April 2019

 Organization Extension for the Extensible Provisioning Protocol (EPP)
                      draft-ietf-regext-org-ext-11

Abstract

   This document describes an extension to Extensible Provisioning
   Protocol (EPP) object mappings, which mappings that is designed to support assigning
   an organization to any existing object (domain, host, contact) as
   well as any future objects.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list  It represents the consensus of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid the IETF community.  It has
   received public review and has been approved for a maximum publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of six months this document, any errata,
   and how to provide feedback on it may be updated, replaced, or obsoleted by other documents obtained at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on June 8, 2019.
   https://www.rfc-editor.org/info/rfc8544.

Copyright Notice

   Copyright (c) 2018 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2   3
   2.  Conventions Used in This Document . . . . . . . . . . . . . .   3
   3.  Object Attributes . . . . . . . . . . . . . . . . . . . . . .   4   3
     3.1.  Organization Identifier . . . . . . . . . . . . . . . . .   4
   4.  EPP Command Mapping . . . . . . . . . . . . . . . . . . . . .   4
     4.1.  EPP Query Commands  . . . . . . . . . . . . . . . . . . .   4
       4.1.1.  EPP <check> Command . . . . . . . . . . . . . . . . .   4
       4.1.2.  EPP <info> Command  . . . . . . . . . . . . . . . . .   4
       4.1.3.  EPP <transfer> Query Command  . . . . . . . . . . . .   7   8
     4.2.  EPP Transform Commands  . . . . . . . . . . . . . . . . .   8
       4.2.1.  EPP <create> Command  . . . . . . . . . . . . . . . .   8
       4.2.2.  EPP <delete> Command  . . . . . . . . . . . . . . . .  10
       4.2.3.  EPP <renew> Command . . . . . . . . . . . . . . . . .  10
       4.2.4.  EPP <transfer> Command  . . . . . . . . . . . . . . .  11
       4.2.5.  EPP <update> Command  . . . . . . . . . . . . . . . .  11
   5.  Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . .  15
   6.  Internationalization Considerations . . . . . . . . . . . . .  18
   7.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  18
     7.1.  XML Namespace . . . . . . . . . . . . . . . . . . . . . .  18
     7.2.  EPP Extension Registry  . . . . . . . . . . . . . . . . .  18
   8.  Implementation Status . . . . . . . . . . . . . . . . . . . .  19
     8.1.  Verisign EPP SDK  .
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .  19
     8.2.  CNNIC Implementation  . . . . . . . . . . . . . . . . . .  20
   9.  Security Considerations . . . . . . . . . . . . . . . . .  References  . .  20
   10. Acknowledgment . . . . . . . . . . . . . . . . . . . . . . .  20
   11.  19
     9.1.  Normative References  . . . . . . . . . . . . . . . . . . . . . . . . .  20
     11.1.  Normative  19
     9.2.  Informative References  . . . . . . . . . . . . . . . . . .  20
     11.2.  Informative References . .
   Acknowledgments . . . . . . . . . . . . . . .  22
   Appendix A.  Change Log . . . . . . . . . . . . . . . . . . . . .  22  21
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  25  22

1.  Introduction

   In the business model of domain registration, we usually have three
   roles of entities: a registrant, a registrar and a registry, as
   defined in section 9 of [ID.draft-ietf-dnsop-terminology-bis].

   There
   may be other roles of entities involved in the domain registration
   process, are many entities, such as registrars, resellers, DNS operators in section 9 of
   [ID.draft-ietf-dnsop-terminology-bis], service
   operators, and privacy proxies, etc.

   A domain reseller is an individual or a company that acts as an agent
   for accredited registrars.  DNS operator is defined involved in section 9 of
   [ID.draft-ietf-dnsop-terminology-bis].  A privacy proxy is an entity
   used for domain registrations to protect the private information of the individuals and organizations. domain registration
   business.  These kind kinds of entities are
   defined as "organizations" with different role types in this
   document.

   In order to facilitate provisioning and management of organization
   information supported in a shared central repository, this document proposes an
   organization extension mapping for any the Extensible
   Provisioning Protocol (EPP) by the "organization" entities in
   [RFC8543].  This document provides a way to associate any EPP object like
   such as domain names in [RFC5731], hosts in
   [RFC5732] [RFC5732], and contacts
   in [RFC5733]. [RFC5733] to "organization" entities in [RFC8543].  The examples
   provided in this document are used for the domain object for
   illustration purpose. purposes.  The host and contact object could be extended
   in the same way with as the domain object.

   Organization object identifiers identifiers, defined in [ID.draft-ietf-regext-org] [RFC8543], MUST be known
   to the server before the organization object can be associated with
   the EPP object.

   This document is specified using the XML 1.0 as described in
   [W3C.REC-xml-20040204]
   [W3C.REC-xml-20081126] and XML Schema notation as described in
   [W3C.REC-xmlschema-1-20041028] and [W3C.REC-xmlschema-2-20041028].

2.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14
   [RFC2119][RFC8174] [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   In examples, "C:" represents lines sent by a protocol client client, and
   "S:" represents lines returned by a protocol server.  Indentation and
   white space in examples are provided only to illustrate element
   relationships and are not a required feature of this specification.

   XML is case sensitive.  Unless stated otherwise, XML specifications
   and examples provided in this document MUST be interpreted in the
   character case. case presented.

   The XML namespace prefix "orgext" is used for the namespace
   "urn:ietf:params:xml:ns:epp:orgext-1.0", but implementations MUST NOT
   depend on it and instead it; instead, they should employ a proper namespace-aware
   XML parser and serializer to interpret and output the XML documents.

3.  Object Attributes

   This extension adds additional elements to EPP object mappings like such
   as the EPP domain name mapping [RFC5731].  Only the new elements are
   described here.

3.1.  Organization Identifier

   Organization

   The organization identifier provides the ID of an organization.  Its
   corresponding element is <orgext:id> <orgext:id>, which refers to the <org:id>
   element defined in [ID.draft-ietf-regext-org]. [RFC8543].  All organization objects are
   identified by a server-unique identifier.  A "role" attribute is used
   to represent the relationship that the organization has to the EPP
   object.  Any given object MUST have at most one associated
   organization ID for any given role value.

4.  EPP Command Mapping

   A detailed description of the EPP syntax and semantics can be found
   in the EPP core protocol specification [RFC5730].  The command
   mappings described here are specifically for assigning organizations
   to EPP objects.

4.1.  EPP Query Commands

   EPP provides three commands to retrieve EPP object information:
   <check> to determine if an object can be provisioned within a
   repository, <info> to retrieve detailed information associated with
   an object, and <transfer> to retrieve object transfer status
   information.

4.1.1.  EPP <check> Command

   This extension does not add any elements to the EPP <check> command
   or <check> response described in the EPP object mapping.

4.1.2.  EPP <info> Command

   This extension does not add any elements to the EPP <info> command
   described in the EPP object mapping.  However, additional elements
   are defined for the <info> response in the EPP object mapping.

   When an <info> command has been processed successfully, the EPP
   <resData> element MUST contain child elements as described in the EPP
   object extensions.  In addition, the EPP <extension> element SHOULD
   contain a child <orgext:infData> element.  This element or its
   ancestor element MUST identify the extension namespace
   "urn:ietf:params:xml:ns:epp:orgext-1.0" is returned
   if the object has data that is associated with this extension and
   that is based on server policy.  This element or its ancestor element
   MUST identify the extension namespace
   "urn:ietf:params:xml:ns:epp:orgext-1.0".  The <orgext:infData>
   element contains the following child elements:

   o  Zero or more <orgext:id> elements are allowed that contain the
      identifier of the organization, as defined in Section 3.1.  The
      "role" attribute is used to represent the relationship that the
      organization has to the object.  See Section 7.3 in
      [ID.draft-ietf-regext-org] of [RFC8543] for
      a list of values.

   Example <info> response for an authorized client with multiple
   organizations:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:   <result code="1000">
   S:      <msg lang="en-US">Command completed successfully</msg>
   S:    </result>
   S:    <resData>
   S:      <domain:infData
   S:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   S:        <domain:name>example.com</domain:name>
   S:        <domain:roid>EXAMPLE1-REP</domain:roid>
   S:        <domain:status s="ok"/>
   S:        <domain:registrant>jd1234</domain:registrant>
   S:        <domain:contact type="admin">sh8013</domain:contact>
   S:        <domain:contact type="billing">sh8013</domain:contact>
   S:        <domain:contact type="tech">sh8013</domain:contact>
   S:        <domain:ns>
   S:          <domain:hostObj>ns1.example.com</domain:hostObj>
   S:        </domain:ns>
   S:        <domain:clID>ClientX</domain:clID>
   S:        <domain:crID>ClientY</domain:crID>
   S:        <domain:crDate>2015-02-06T04:01:21.0Z</domain:crDate>
   S:        <domain:exDate>2018-02-06T04:01:21.0Z</domain:exDate>
   S:        <domain:authInfo>
   S:          <domain:pw>2fooBAR</domain:pw>
   S:        </domain:authInfo>
   S:      </domain:infData>
   S:    </resData>
   S:    <extension>
   S:      <orgext:infData
   S:        xmlns:orgext="urn:ietf:params:xml:ns:epp:orgext-1.0">
   S:        <orgext:id role="reseller">reseller1523</orgext:id>
   S:        <orgext:id role="privacyproxy">proxy2935</orgext:id>
   S:      </orgext:infData>
   S:    </extension>
   S:    <trID>
   S:      <clTRID>ngcl-IvJjzMZc</clTRID>
   S:      <svTRID>test142AWQONJZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>
   Example <info> response for an authorized client with no
   organization:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:   <result code="1000">
   S:      <msg lang="en-US">Command completed successfully</msg>
   S:    </result>
   S:    <resData>
   S:      <domain:infData
   S:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   S:        <domain:name>example.com</domain:name>
   S:        <domain:roid>EXAMPLE1-REP</domain:roid>
   S:        <domain:status s="ok"/>
   S:        <domain:registrant>jd1234</domain:registrant>
   S:        <domain:contact type="admin">sh8013</domain:contact>
   S:        <domain:contact type="billing">sh8013</domain:contact>
   S:        <domain:contact type="tech">sh8013</domain:contact>
   S:        <domain:ns>
   S:          <domain:hostObj>ns1.example.com</domain:hostObj>
   S:        </domain:ns>
   S:        <domain:clID>ClientX</domain:clID>
   S:        <domain:crID>ClientY</domain:crID>
   S:        <domain:crDate>2015-02-06T04:01:21.0Z</domain:crDate>
   S:        <domain:exDate>2018-02-06T04:01:21.0Z</domain:exDate>
   S:        <domain:authInfo>
   S:          <domain:pw>2fooBAR</domain:pw>
   S:        </domain:authInfo>
   S:      </domain:infData>
   S:    </resData>
   S:    <extension>
   S:      <orgext:infData
   S:        xmlns:orgext="urn:ietf:params:xml:ns:epp:orgext-1.0"/>
   S:    </extension>
   S:    <trID>
   S:      <clTRID>ngcl-IvJjzMZc</clTRID>
   S:      <svTRID>test142AWQONJZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

   An EPP error response MUST be returned if an <info> command cannot be
   processed for any reason.

4.1.3.  EPP <transfer> Query Command

   This extension does not add any elements to the EPP <transfer> query
   command or <transfer> query response described in the EPP object
   mapping.

4.2.  EPP Transform Commands

   EPP provides five commands to transform EPP objects: <create> to
   create an instance of an object, <delete> to delete an instance of an
   object, <renew> to extend the validity period of an object,
   <transfer> to manage the object sponsorship changes, and <update> to
   change information associated with an object.

4.2.1.  EPP <create> Command

   This extension defines additional elements for the EPP <create>
   command described in the EPP object extensions.  No additional
   elements are defined for the EPP <create> response.

   The EPP <create> command provides a transform operation that allows a
   client to create an object.  In addition to the EPP command elements
   described in the EPP object extensions, the command MUST contain an
   <extension> element, and the <extension> element MUST contain a child
   <orgext:create> element.  This element or its ancestor element MUST
   identify the extension namespace "urn:ietf:params:xml:ns:epp:orgext-
   1.0" is used if the client wants to
   associate data defined in this extension to the object.  This element
   or its ancestor element MUST identify the extension namespace
   "urn:ietf:params:xml:ns:epp:orgext-1.0".  The <orgext:create> element
   contains the following child elements:

   o  One or more <orgext:id> elements that contain the identifier of
      the organization, as defined in Section 3.1.  The "role" attribute
      is used to represent the relationship that the organization has to
      the object.  See Section 7.3 in [ID.draft-ietf-regext-org] of [RFC8543] for a list of values.

   Example <create> Command command with only one organization:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <create>
   C:      <domain:create
   C:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   C:        <domain:name>example.com</domain:name>
   C:        <domain:period unit="y">3</domain:period>
   C:        <domain:ns>
   C:          <domain:hostObj>ns1.example.com</domain:hostObj>
   C:        </domain:ns>
   C:        <domain:registrant>jd1234</domain:registrant>
   C:        <domain:contact type="tech">sh8013</domain:contact>
   C:        <domain:contact type="billing">sh8013</domain:contact>
   C:        <domain:contact type="admin">sh8013</domain:contact>
   C:        <domain:authInfo>
   C:          <domain:pw>fooBAR</domain:pw>
   C:        </domain:authInfo>
   C:      </domain:create>
   C:    </create>
   C:    <extension>
   C:      <orgext:create
   C:        xmlns:orgext="urn:ietf:params:xml:ns:epp:orgext-1.0">
   C:        <orgext:id role="reseller">reseller1523</orgext:id>
   C:      </orgext:create>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>
   Example <create> Command command with multiple organizations:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <create>
   C:      <domain:create
   C:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   C:        <domain:name>example.com</domain:name>
   C:        <domain:period unit="y">3</domain:period>
   C:        <domain:ns>
   C:          <domain:hostObj>ns1.example.com</domain:hostObj>
   C:        </domain:ns>
   C:        <domain:registrant>jd1234</domain:registrant>
   C:        <domain:contact type="tech">sh8013</domain:contact>
   C:        <domain:contact type="billing">sh8013</domain:contact>
   C:        <domain:contact type="admin">sh8013</domain:contact>
   C:        <domain:authInfo>
   C:          <domain:pw>fooBAR</domain:pw>
   C:        </domain:authInfo>
   C:      </domain:create>
   C:    </create>
   C:    <extension>
   C:      <orgext:create
   C:        xmlns:orgext="urn:ietf:params:xml:ns:epp:orgext-1.0">
   C:        <orgext:id role="reseller">reseller1523</orgext:id>
   C:        <orgext:id role="privacyproxy">proxy2935</orgext:id>
   C:      </orgext:create>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When a <create> command has been processed successfully, the EPP
   response is as described in the EPP object extension.

   An EPP error response MUST be returned if a <create> command cannot
   be processed for any reason.

4.2.2.  EPP <delete> Command

   This extension does not add any elements to the EPP <delete> command
   or <delete> response described in the EPP object mapping.

4.2.3.  EPP <renew> Command

   This extension does not add any elements to the EPP <renew> command
   or <renew> response described in the EPP object mapping.

4.2.4.  EPP <transfer> Command

   This extension does not add any elements to the EPP <transfer>
   command or <transfer> response described in the EPP object mapping,
   but after a successful transfer of an object with an assigned
   organization, the handling of the assigned organization is dependent
   on the organization roles and server policy.

4.2.5.  EPP <update> Command

   This extension defines additional elements for the EPP <update>
   command described in the EPP domain mapping [RFC5731], host mapping
   [RFC5732]
   [RFC5732], and contact mapping [RFC5733].  No additional elements are
   defined for the EPP <update> response.

   The EPP <update> command provides a transform operation that allows a
   client to modify the attributes of an object.  In addition to the EPP
   <update> command elements, the command MUST contain an <extension>
   element, and the <extension> element MUST contain a child
   <orgext:update> element.  This element or its ancestor element MUST
   identify the extension namespace "urn:ietf:params:xml:ns:epp:orgext-
   1.0" is used if the client wants to
   update the object with data defined in this extension.  This element
   or its ancestor element MUST identify the extension namespace
   "urn:ietf:params:xml:ns:epp:orgext-1.0".  The <orgext:update> element
   contains the following child elements:

   o  An OPTIONAL <orgext:add> element that contains one or more
      <orgext:id> elements, as defined in Section 3.1, that add non-
      existent
      nonexistent organization roles to the object.  The <orgext:id>
      element MUST have a non-empty organization identifier value.  The
      server SHOULD validate that the <orgext:id> element role does not
      exist.

   o  An OPTIONAL <orgext:rem> element that contains one or more
      <orgext:id> elements, as defined in Section 3.1, that remove
      organization roles from the object.  The <orgext:id> element MAY
      have an empty organization identifier value.  The server SHOULD
      validate the existence of the <orgext:id> element role and the
      organization identifier if provided.

   o  An OPTIONAL <orgext:chg> element that contains one or more
      <orgext:id> elements, as defined in Section 3.1, that change
      organization role identifiers for the object.  The existing
      organization identifier value will be replaced for the defined
      role.  The server SHOULD validate the existence of the <orgext:id>
      element role.

   At least one <orgext:add>, <orgext:rem> <orgext:rem>, or <orgext:chg> element MUST
   be provided.

   Example <update> command, adding a reseller:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <update>
   C:      <domain:update
   C:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   C:        <domain:name>example.com</domain:name>
   C:      </domain:update>
   C:    </update>
   C:    <extension>
   C:      <orgext:update
   C:        xmlns:orgext="urn:ietf:params:xml:ns:epp:orgext-1.0">
   C:        <orgext:add>
   C:          <orgext:id role="reseller">reseller1523</orgext:id>
   C:        </orgext:add>
   C:      </orgext:update>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   Example <update> command, adding multiple organizations:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <update>
   C:      <domain:update
   C:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   C:        <domain:name>example.com</domain:name>
   C:      </domain:update>
   C:    </update>
   C:    <extension>
   C:      <orgext:update
   C:        xmlns:orgext="urn:ietf:params:xml:ns:epp:orgext-1.0">
   C:        <orgext:add>
   C:          <orgext:id role="reseller">reseller1523</orgext:id>
   C:          <orgext:id role="privacyproxy">proxy2935</orgext:id>
   C:        </orgext:add>
   C:      </orgext:update>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>
   Example <update> command, removing a reseller:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <update>
   C:      <domain:update
   C:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   C:        <domain:name>example.com</domain:name>
   C:      </domain:update>
   C:    </update>
   C:    <extension>
   C:      <orgext:update
   C:        xmlns:orgext="urn:ietf:params:xml:ns:epp:orgext-1.0">
   C:        <orgext:rem>
   C:          <orgext:id role="reseller"/>
   C:        </orgext:rem>
   C:      </orgext:update>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   Example <update> command, removing multiple organizations:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <update>
   C:      <domain:update
   C:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   C:        <domain:name>example.com</domain:name>
   C:      </domain:update>
   C:    </update>
   C:    <extension>
   C:      <orgext:update
   C:        xmlns:orgext="urn:ietf:params:xml:ns:epp:orgext-1.0">
   C:        <orgext:rem>
   C:          <orgext:id role="reseller"/>
   C:          <orgext:id role="privacyproxy"/>
   C:        </orgext:rem>
   C:      </orgext:update>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>
   Example <update> command, updating reseller identifier:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <update>
   C:      <domain:update
   C:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   C:        <domain:name>example.com</domain:name>
   C:      </domain:update>
   C:    </update>
   C:    <extension>
   C:      <orgext:update
   C:        xmlns:orgext="urn:ietf:params:xml:ns:epp:orgext-1.0">
   C:        <orgext:chg>
   C:          <orgext:id role="reseller">reseller1523</orgext:id>
   C:        </orgext:chg>
   C:      </orgext:update>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   Example <update> command, updating multiple organization identifiers:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <update>
   C:      <domain:update
   C:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   C:        <domain:name>example.com</domain:name>
   C:      </domain:update>
   C:    </update>
   C:    <extension>
   C:      <orgext:update
   C:        xmlns:orgext="urn:ietf:params:xml:ns:epp:orgext-1.0">
   C:        <orgext:chg>
   C:          <orgext:id role="reseller">reseller1523</orgext:id>
   C:          <orgext:id role="privacyproxy">proxy2935</orgext:id>
   C:        </orgext:chg>
   C:     </orgext:update>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>
   When an extended <update> command has been processed successfully,
   the EPP response is as described in the EPP object extension.

   An EPP error response MUST be returned if an <update> command cannot
   be processed for any reason.  An attempt to add one organization ID
   or multiple organization IDs with a particular role value when at
   least one of them already exists does not change the object at all.
   A server SHOULD notify clients that object relationships exist by
   sending a 2305 error response code.  An attempt to remove an
   organization ID or multiple organization IDs with a particular role
   value when at least one of them does not exist does not change the
   object at all.  A server SHOULD notify clients that object
   relationships does do not exist by sending a 2305 error response code.  An
   attempt to change an organization ID or multiple organization IDs
   with a particular role value when at least one of them does not exist
   does not change the object at all.  A server SHOULD notify clients
   that object relationships does do not exist by sending a 2305 error
   response code.  Response format with error value elements is defined
   in Section 2.6 of [RFC5730].

5.  Formal Syntax

   An EPP object mapping is specified in XML Schema notation.  The
   formal syntax presented here is a complete schema representation of
   the object mapping suitable for automated validation of EPP XML
   instances.  The BEGIN and END tags are not part of the schema; they
   are used to note the beginning and ending of the schema for URI
   registration purposes.

   BEGIN
   <?xml version="1.0" encoding="UTF-8"?>

   <schema
     targetNamespace="urn:ietf:params:xml:ns:epp:orgext-1.0"
     xmlns:orgext="urn:ietf:params:xml:ns:epp:orgext-1.0"
     xmlns="http://www.w3.org/2001/XMLSchema"
     elementFormDefault="qualified"
   >

     <annotation>
       <documentation>
         Extensible Provisioning Protocol v1.0
         Organization Extension Schema v1.0
       </documentation>
     </annotation>
     <!-- Child elements found in EPP commands. commands -->
     <element
       name="create"
       type="orgext:createType"/>
     <element
       name="update"
       type="orgext:updateType"/>

     <!--
       Organization identifier with required role
     -->
     <complexType name="orgIdType">
       <simpleContent>
         <extension base="token">
           <attribute
             name="role"
             type="token"
             use="required"/>
         </extension>
       </simpleContent>
     </complexType>

     <!--
       Child elements of the <orgext:create> command command.
       All elements must be present at time of creation creation.
     -->
     <complexType name="createType">
       <sequence>
         <!-- agent Agent identifier or the organization,
           e.g.
           e.g., registrar, reseller, privacy proxy, etc. -->
         <element
           name="id"
           type="orgext:orgIdType"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>

     <!--
       Child elements of <orgext:update> command
     -->
     <complexType name="updateType">
       <sequence>
         <element
           name="add"
           type="orgext:addRemChgType"
           minOccurs="0"
         />
         <element
           name="rem"
           type="orgext:addRemChgType"
           minOccurs="0"
         />
         <element
           name="chg"
           type="orgext:addRemChgType"
           minOccurs="0"
         />
       </sequence>
     </complexType>

     <complexType name="addRemChgType">
       <sequence>
         <!-- agent Agent identifier of the organization,
           e.g.
           e.g., registrar, reseller, privacy proxy, etc. -->
         <element
           name="id"
           type="orgext:orgIdType"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>

     <!-- Child response element -->
     <element
       name="infData"
       type="orgext:infDataType"/>

     <!-- <orgext:infData> response elements -->
     <complexType name="infDataType">
       <sequence>
         <!-- agent Agent identifier the organization,
           e.g.
           e.g., registrar, reseller, privacy proxy, etc. -->
         <element
           name="id"
           type="orgext:orgIdType"
           minOccurs="0"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>

     <!-- End of schema. schema -->
   </schema>
   END

6.  Internationalization Considerations

   EPP is represented in XML, which provides native support for encoding
   information using the Unicode character set [UNICODE] and its more
   compact
   representations representations, including UTF-8.  Conformant XML processors
   recognize both UTF-8 [RFC3629] and UTF-16. UTF-16 [RFC2781].  Though XML
   includes provisions to identify and use other character encodings
   through use of an "encoding" attribute in an <?xml?> declaration, use
   of UTF-8 is RECOMMENDED.

   As an extension of the EPP object mapping, the elements, elements and element
   content described in this document MUST inherit the
   internationalization conventions used to represent higher-layer
   domain and core protocol structures present in an XML instance that
   includes this extension.

7.  IANA Considerations

7.1.  XML Namespace

   This document uses URNs to describe XML namespaces and XML schemas
   conforming to a registry mechanism described in [RFC3688].  IANA is
   requested to assignment has
   assigned the following URI.

   Registration request for the

   The organization extension namespace:

      URI: urn:ietf:params:xml:ns:epp:orgext-1.0

      Registrant Contact: IESG

      XML: None.  Namespace URIs do not represent an XML specification.

   Registration request for the

   The organization XML schema:

      URI: urn:ietf:params:xml:schema:epp:orgext-1.0

      Registrant Contact: IESG

      XML: See the "Formal Syntax" section of this document. RFC 8544 (this document).

7.2.  EPP Extension Registry

   The EPP extension described in this document should be has been registered by
   the
   IANA in the EPP Extension Registry "Extensions for the Extensible Provisioning Protocol
   (EPP)" registry described in [RFC7451].  The details of the
   registration are as follows:

   Name of Extension: Organization Extension for the Extensible
   Provisioning Protocol (EPP)

   Document status: Status: Standards Track

   Reference: RFCXXXX (please replace "XXXX" with the RFC number for
   this document after a number is assigned by the RFC Editor) 8544

   Registrant Name and Email Address: IESG, iesg@ietf.org

   TLDs: Any

   IPR Disclosure: None

   Status: Active

   Notes: None

8.  Implementation Status

   Note to RFC Editor: Please remove  Security Considerations

   The object mapping extension described in this section document does not
   provide any other security services or introduce any additional
   considerations beyond those described by [RFC5730], [RFC5731],
   [RFC5732], and the reference to
   [RFC7942] before publication.  This section records the status of
   known implementations of the protocol defined by this specification
   at the time of posting of this Internet-Draft, and is based on a
   proposal described in [RFC7942].  The description of implementations
   in this section is intended to assist the IETF in its decision
   processes in progressing drafts to RFCs.  Please note that the
   listing of any individual implementation here does not imply
   endorsement by the IETF.  Furthermore, no effort has been spent to
   verify the information presented here that was supplied by IETF
   contributors.  This is not intended as, and must not be construed to
   be, a catalog of available implementations or their features.
   Readers are advised to note that other implementations may exist.

   According to [RFC7942], "this will allow reviewers and working groups
   to assign due consideration to documents that have the benefit of
   running code, which may serve as evidence of valuable experimentation
   and feedback that have made the implemented protocols more mature.
   It is up to the individual working groups to use this information as
   they see fit".

8.1.  Verisign EPP SDK

   Organization: Verisign Inc.

   Name: Verisign EPP SDK

   Description: The Verisign EPP SDK includes both a full client
   implementation and a full server stub implementation of draft-ietf-
   regext-org-ext.

   Level of maturity: Development

   Coverage: All aspects of the protocol are implemented.

   Licensing: GNU Lesser General Public License

   Contact: jgould@verisign.com

   URL: https://www.verisign.com/en_US/channel-resources/domain-
   registry-products/epp-sdks

8.2.  CNNIC Implementation

   Organization: CNNIC

   Name: Organization Extension for EPP

   Description: CNNIC is trying to update organization extension from
   previous reseller extension according to this document.

   Level of maturity: Development

   Coverage: Organization extension for EPP

   Contact: zhouguiqing@cnnic.cn

9.  Security Considerations

   The object mapping extension described in this document does not
   provide any other security services or introduce any additional
   considerations beyond those described by [RFC5730], [RFC5731],
   [RFC5732] and [RFC5733] or those caused by [RFC5733] or those caused by the protocol layers used
   by EPP.

10.  Acknowledgment

   The authors would like to thank Rik Ribbers, Marc Groeneweg, Patrick
   Mevzek, Antoin Verschuren and Scott Hollenbeck for their careful
   review and valuable comments.

11.

9.  References

11.1.

9.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November
              2003, <https://www.rfc-editor.org/info/rfc3629>.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <https://www.rfc-editor.org/info/rfc3688>.

   [RFC5730]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
              STD 69, RFC 5730, DOI 10.17487/RFC5730, August 2009,
              <https://www.rfc-editor.org/info/rfc5730>.

   [RFC5731]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)
              Domain Name Mapping", STD 69, RFC 5731,
              DOI 10.17487/RFC5731, August 2009,
              <https://www.rfc-editor.org/info/rfc5731>.

   [RFC5732]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)
              Host Mapping", STD 69, RFC 5732, DOI 10.17487/RFC5732,
              August 2009, <https://www.rfc-editor.org/info/rfc5732>.

   [RFC5733]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)
              Contact Mapping", STD 69, RFC 5733, DOI 10.17487/RFC5733,
              August 2009, <https://www.rfc-editor.org/info/rfc5733>.

   [RFC7942]  Sheffer, Y. and A. Farrel, "Improving Awareness of Running
              Code: The Implementation Status Section", BCP 205,
              RFC 7942, DOI 10.17487/RFC7942, July 2016,
              <https://www.rfc-editor.org/info/rfc7942>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [W3C.REC-xml-20040204]

   [UNICODE]  The Unicode Consortium, "The Unicode Standard",
              <http://www.unicode.org/versions/latest/>.

   [W3C.REC-xml-20081126]
              Bray, T., Paoli, J., Sperberg-McQueen, C., Maler, E., and
              F. Yergeau, ""Extensible "Extensible Markup Language (XML) 1.0 (Third (Fifth
              Edition)", World Wide Web Consortium FirstEdition REC-xml-
              20040204", February 2004,
              <http://www.w3.org/TR/2004/REC-xml-20040204>. Recommendation REC-
              xml-20081126, November 2008, <https://www.w3.org/TR/xml/>.

   [W3C.REC-xmlschema-1-20041028]
              Thompson, H., Beech, D., Maloney, M., and N. Mendelsohn,
              ""XML
              "XML Schema Part 1: Structures Second Edition", World Wide
              Web Consortium Recommendation REC-xmlschema-
              1-20041028", REC-xmlschema-1-20041028,
              October 2004,
              <http://www.w3.org/TR/2004/REC-xmlschema-1-20041028>.

   [W3C.REC-xmlschema-2-20041028]
              Biron, P. and A. Malhotra, ""XML "XML Schema Part 2: Datatypes
              Second Edition", World Wide Web Consortium Recommendation
              REC-xmlschema-2-20041028",
              REC-xmlschema-2-20041028, October 2004,
              <http://www.w3.org/TR/2004/REC-xmlschema-2-20041028>.

11.2.

9.2.  Informative References

   [ID.draft-ietf-dnsop-terminology-bis]

   [RFC2781]  Hoffman, P., Sullivan, A., and K. Fujiwara, "DNS
              Terminology", September 2018, <http://tools.ietf.org/html/
              draft-ietf-dnsop-terminology-bis>.

   [ID.draft-ietf-regext-org]
              Zhou, L., Kong, N., Zhou, G., Yao, J., P. and J. Gould,
              "Extensible Provisioning Protocol (EPP) Reseller Mapping",
              November 2018,
              <http://tools.ietf.org/html/draft-ietf-regext-org>. F. Yergeau, "UTF-16, an encoding of ISO
              10646", RFC 2781, DOI 10.17487/RFC2781, February 2000,
              <https://www.rfc-editor.org/info/rfc2781>.

   [RFC7451]  Hollenbeck, S., "Extension Registry for the Extensible
              Provisioning Protocol", RFC 7451, DOI 10.17487/RFC7451,
              February 2015, <https://www.rfc-editor.org/info/rfc7451>.

Appendix A.  Change Log

   Initial -00:  Individual document submitted.

   -01:

      *  Updated abstract and introduction.

      *  Revised typos in info response.

      *  Added explanations on how to process reseller extension after
         successful transfer operation.

      *  Modified <update> explanation.

      *  Deleted reseller name element in <create> and <update>
         commands.

      *  Removed some inaccurate comments from xml schema.

      *  Modified the element name of reseller id and reseller name.

   -02:

      *  Changed author information.

      *  Updated xml typos <reseller:infData> to <resellerext:infData>
         in <info> response.

   -03:

      *  Changed author information.

      *  Updated section 3.1.

      *  Removed reseller name element in <info> response.

      *  Added acknowledgment.

      *  Revised the typo "resellerr" to "resellerext".

   WG document-00:  WG document submitted

   WG document-01:  Keep document alive for further discussion.  The
      requirement of reseller information is clear for both registrar
      and registry.  What we should reach a consensus is whether the
      extension should support only a name or ID

   [RFC8543]  Zhou, L., Kong, N., Yao, J., Gould, J., and name. G. Zhou,
              "Extensible Provisioning Protocol (EPP) Organization WG document-00:  Change
              Mapping", RFC 8543, DOI 10.17487/RFC8543, March 2019,
              <https://www.rfc-editor.org/info/rfc8543>.

Acknowledgments

   The authors would like to a generic organization object
      extension.

   Organization WG document-01:  Added "Implementation Status" section.

   Organization WG document-02:  Accepted some of the feedbacks on the
      mailing list.  Modified the examples in the document.

   Organization WG document-03:

      *  Updated typos.

      *  Changed some descriptions about <orgext:id> thank Rik Ribbers, Marc Groeneweg, Patrick
   Mevzek, Antoin Verschuren, and role attribute.

      *  Modified the example of "domain with no organization".

      *  Updated section 8, adding implementation status of Verisign.

   Organization WG document-04:

      *  Updated typos.

      *  Removed the example of <update> command, domain with no
         organization.

      *  Updated references.

      *  Updated section 8 of implementation status.

   Organization WG document-05:

      *  Removed the minOccurs="0" from the addRemChgType type of the
         XML schema

      *  Removed the third paragraph of "Implementation Status".

      *  Remove the Informative Reference to draft-ietf-regext-reseller-
         ext from the draft.

   Organization WG document-06:

      *  Updated "Abstraction".

      *  Added "Query" Scott Hollenbeck for "<Transfer> Query Command".

      *  Change "Registrant Contact" to IESG in section 7.1.

      *  Modified section 7.2.

   Organization WG document-07:

      *  Updated "Abstraction".

   Organization WG document-08:

      *  Updated error codes of <update> response.

      *  Modified XML namespace and schema.

   Organization WG document-09:

      *  Modified XML namespace and schema.

      *  Changed "Exactly one" to "At least one" in section 4.2.5.

   Organization WG document-10:

      *  Updated the reseller id and dns proxy id in the document.

      *  Updated the full xml namespace.

      *  Updated the text of EPP <orgext:add>, <orgext:rem> and
         <orgext:chg>.

      *  Added "Document satus" their careful
   review and "Reference" in section "EPP
         Extension Registry".

   Organization WG document-11:

      *  Added the reference of draft-ietf-dnsop-terminology-bis. valuable comments.

Authors' Addresses

   Linlin Zhou
   CNNIC
   4 South 4th Street, Zhongguancun, Haidian District
   Beijing, Beijing  100190
   China

   Email: zhoulinlin@cnnic.cn

   Ning Kong
   Consultant

   Email: ietfing@gmail.com

   Junkai Wei
   CNNIC
   4 South 4th Street, Zhongguancun, Haidian District
   Beijing, Beijing  100190
   China

   Email: weijunkai@cnnic.cn

   Jiankang Yao
   CNNIC
   4 South 4th Street, Zhongguancun, Haidian District
   Beijing, Beijing  100190
   China

   Email: yaojk@cnnic.cn

   James Gould
   Verisign,
   VeriSign, Inc.
   12061 Bluemont Way
   Reston, VA  20190
   US
   United States of America

   Email: jgould@verisign.com
   URI:   http://www.verisign.com