LWIG Working Group

Internet Engineering Task Force (IETF)                          C. Gomez
Internet-Draft
Request for Comments: 9006                                           UPC
Intended status:
Category: Informational                                     J. Crowcroft
Expires: May 3, 2021
ISSN: 2070-1721                                  University of Cambridge
                                                               M. Scharf
                                                    Hochschule Esslingen
                                                        October 30, 2020
                                                              March 2021

           TCP Usage Guidance in the Internet of Things (IoT)
            draft-ietf-lwig-tcp-constrained-node-networks-13

Abstract

   This document provides guidance on how to implement and use the
   Transmission Control Protocol (TCP) in Constrained-Node Networks
   (CNNs), which are a characteristic of the Internet of Things (IoT).
   Such environments require a lightweight TCP implementation and may
   not make use of optional functionality.  This document explains a
   number of known and deployed techniques to simplify a TCP stack as
   well as corresponding tradeoffs. trade-offs.  The objective is to help embedded
   developers with decisions on which TCP features to use.

Status of This Memo

   This Internet-Draft document is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents not an Internet Standards Track specification; it is
   published for informational purposes.

   This document is a product of the Internet Engineering Task Force
   (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list  It represents the consensus of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Not all documents valid
   approved by the IESG are candidates for a maximum any level of Internet
   Standard; see Section 2 of six months RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be updated, replaced, or obsoleted by other documents obtained at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on May 3, 2021.
   https://www.rfc-editor.org/info/rfc9006.

Copyright Notice

   Copyright (c) 2020 2021 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Characteristics of CNNs relevant Relevant for TCP  . . . . . . . . . .   4
     2.1.  Network and link properties . . . . . . . . . . . . . . .   4 Link Properties
     2.2.  Usage scenarios . . . . . . . . . . . . . . . . . . . . .   5 Scenarios
     2.3.  Communication and traffic patterns  . . . . . . . . . . .   6 Traffic Patterns
   3.  TCP implementation Implementation and configuration Configuration in CNNs  . . . . . . . .   6
     3.1.  Addressing path properties  . . . . . . . . . . . . . . .   7 Path Properties
       3.1.1.  Maximum Segment Size (MSS)  . . . . . . . . . . . . .   7
       3.1.2.  Explicit Congestion Notification (ECN)  . . . . . . .   8
       3.1.3.  Explicit loss notifications . . . . . . . . . . . . .   9 Loss Notifications
     3.2.  TCP guidance Guidance for single-MSS stacks  . . . . . . . . . . .   9 Single-MSS Stacks
       3.2.1.  Single-MSS stacks - benefits Stacks -- Benefits and issues . . . . . . .   9 Issues
       3.2.2.  TCP options Options for single-MSS stacks . . . . . . . . . .  10 Single-MSS Stacks
       3.2.3.  Delayed Acknowledgments for single-MSS stacks . . . .  10 Single-MSS Stacks
       3.2.4.  RTO calculation Calculation for single-MSS stacks . . . . . . . .  11 Single-MSS Stacks
     3.3.  General recommendations Recommendations for TCP in CNNs . . . . . . . . .  12
       3.3.1.  Loss recovery Recovery and congestion/flow control . . . . . .  12 Congestion/Flow Control
         3.3.1.1.  Selective Acknowledgments (SACK)  . . . . . . . .  13 (SACKs)
       3.3.2.  Delayed Acknowledgments . . . . . . . . . . . . . . .  13
       3.3.3.  Initial Window  . . . . . . . . . . . . . . . . . . .  14
   4.  TCP usage recommendations Usage Recommendations in CNNs . . . . . . . . . . . . . .  14
     4.1.  TCP connection initiation . . . . . . . . . . . . . . . .  14 Connection Initiation
     4.2.  Number of concurrent connections  . . . . . . . . . . . .  15 Concurrent Connections
     4.3.  TCP connection lifetime . . . . . . . . . . . . . . . . .  15 Connection Lifetime
   5.  Security Considerations . . . . . . . . . . . . . . . . . . .  17
   6.  Acknowledgments . . . . . . . . . . . . . . . . . . . . . . .  18  IANA Considerations
   7.  Annex.  References
     7.1.  Normative References
     7.2.  Informative References
   Appendix A.  TCP implementations Implementations for constrained devices  . . . . .  18
     7.1. Constrained Devices
     A.1.  uIP . . . . . . . . . . . . . . . . . . . . . . . . . . .  19
     7.2.
     A.2.  lwIP  . . . . . . . . . . . . . . . . . . . . . . . . . .  19
     7.3.
     A.3.  RIOT  . . . . . . . . . . . . . . . . . . . . . . . . . .  19
     7.4.
     A.4.  TinyOS  . . . . . . . . . . . . . . . . . . . . . . . . .  20
     7.5.
     A.5.  FreeRTOS  . . . . . . . . . . . . . . . . . . . . . . . .  20
     7.6.
     A.6.  uC/OS . . . . . . . . . . . . . . . . . . . . . . . . . .  20
     7.7.
     A.7.  Summary . . . . . . . . . . . . . . . . . . . . . . . . .  21
   8.  Annex. Changes compared to previous versions  . . . . . . . .  22
     8.1.  Changes between -00 and -01 . . . . . . . . . . . . . . .  22
     8.2.  Changes between -01 and -02 . . . . . . . . . . . . . . .  22
     8.3.  Changes between -02 and -03 . . . . . . . . . . . . . . .  22
     8.4.  Changes between -03 and -04 . . . . . . . . . . . . . . .  23
     8.5.  Changes between -04 and -05 . . . . . . . . . . . . . . .  23
     8.6.  Changes between -05 and -06 . . . . . . . . . . . . . . .  23
     8.7.  Changes between -06 and -07 . . . . . . . . . . . . . . .  23
     8.8.  Changes between -07 and -08 . . . . . . . . . . . . . . .  23
     8.9.  Changes between -08 and -09 . . . . . . . . . . . . . . .  23
     8.10. Changes between -09 and -10 . . . . . . . . . . . . . . .  24
     8.11. Changes between -10 and -11 . . . . . . . . . . . . . . .  24
     8.12. Changes between -11 and -12 . . . . . . . . . . . . . . .  24
     8.13. Changes between -12 and -13 . . . . . . . . . . . . . . .  24
   9.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  24
     9.1.  Normative References  . . . . . . . . . . . . . . . . . .  24
     9.2.  Informative References  . . . . . . . . . . . . . . . . .  25
   Acknowledgments
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  30

1.  Introduction

   The Internet Protocol suite is being used for connecting Constrained-
   Node Networks (CNNs) to the Internet, enabling the so-called Internet
   of Things (IoT) [RFC7228].  In order to meet the requirements that
   stem from CNNs, the IETF has produced a suite of new protocols
   specifically designed for such environments (see e.g. (see, e.g., [RFC8352]).
   New IETF protocol stack components include the IPv6 over Low-power Low-Power
   Wireless Personal Area Networks (6LoWPAN) (6LoWPANs) adaptation layer
   [RFC4944][RFC6282][RFC6775], the IPv6 Routing Protocol for Low-power Low-Power
   and lossy networks Lossy Networks (RPL) routing protocol [RFC6550], and the Constrained Application
   Protocol (CoAP) [RFC7252].

   As of the this writing, the main current transport layer transport-layer protocols in IP-
   based IP-based
   IoT scenarios are UDP and TCP.  TCP has been criticized, often
   unfairly, as a protocol that is unsuitable for the IoT.  It is true
   that some TCP features, such as relatively long header size,
   unsuitability for multicast, and always-confirmed data delivery, are
   not optimal for IoT scenarios.  However, many typical claims on TCP
   unsuitability for IoT (e.g. (e.g., a high complexity, connection-oriented
   approach incompatibility with radio duty-cycling, duty-cycling and spurious
   congestion control activation in wireless links) are not valid, can
   be solved, or are also found in well accepted well-accepted IoT end-to-end
   reliability mechanisms (see [IntComp] for a detailed analysis). analysis in [IntComp]).

   At the application layer, CoAP was developed over UDP [RFC7252].
   However, the integration of some CoAP deployments with existing
   infrastructure is being challenged by middleboxes such as firewalls,
   which may limit and even block UDP-based communications.  This is the
   main reason why a CoAP over TCP specification has been developed
   [RFC8323].

   Other application layer application-layer protocols not specifically designed for CNNs
   are also being considered for the IoT space.  Some examples include
   HTTP/2 and even HTTP/1.1, both of which run over TCP by default
   [RFC7230] [RFC7540], and the Extensible Messaging and Presence
   Protocol (XMPP) [RFC6120].  TCP is also used by non-IETF application-
   layer protocols in the IoT space such as the Message Queuing
   Telemetry Transport (MQTT) [MQTT] and its lightweight variants.

   TCP is a sophisticated transport protocol that includes optional
   functionality (e.g. (e.g., TCP options) that may improve performance in
   some environments.  However, many optional TCP extensions require
   complex logic inside the TCP stack and increase the code size and the
   memory requirements.  Many TCP extensions are not required for
   interoperability with other standard-compliant TCP endpoints.  Given
   the limited resources on constrained devices, careful selection of
   optional TCP features can make an implementation more lightweight.

   This document provides guidance on how to implement and configure
   TCP, as well as TCP
   and guidance on how applications should use TCP is advisable to be used by applications, in CNNs.  The
   overarching goal is to offer simple measures to allow for lightweight
   TCP implementation and suitable operation in such environments.  A
   TCP implementation following the guidance in this document is
   intended to be compatible with a TCP endpoint that is compliant to
   the TCP standards, albeit possibly with a lower performance.  This
   implies that such a TCP client would always be able to connect with a
   standard-compliant TCP server, and a corresponding TCP server would
   always be able to connect with a standard-compliant TCP client.

   This document assumes that the reader is familiar with TCP.  A
   comprehensive survey of the TCP standards can be found in RFC 7414
   [RFC7414].  Similar guidance regarding the use of TCP in special
   environments has been published before, e.g., for cellular wireless
   networks [RFC3481].

2.  Characteristics of CNNs relevant Relevant for TCP

2.1.  Network and link properties Link Properties

   CNNs are defined in [RFC7228] as networks whose characteristics are
   influenced by being composed of a significant portion of constrained
   nodes.  The latter are characterized by significant limitations on
   processing, memory, and energy resources, among others [RFC7228].
   The first two dimensions pose constraints on the complexity and on
   the
   memory footprint of the protocols that constrained nodes can support.
   The latter requires techniques to save energy, such as radio duty-cycling duty-
   cycling in wireless devices [RFC8352], as well as [RFC8352] and the minimization of the
   number of messages transmitted/received (and their size).

   [RFC7228] lists typical network constraints in CNN, CNNs, including low
   achievable bitrate/throughput, high packet loss and high variability
   of packet loss, highly asymmetric link characteristics, severe
   penalties for using larger packets, limits on reachability over time,
   etc.  CNN  CNNs may use wireless or wired technologies (e.g., Power Line
   Communication), and the transmission rates are typically low (e.g. (e.g.,
   below 1 Mbps).

   For use of TCP, one challenge is that not all technologies in a CNN
   may be aligned with typical Internet subnetwork design principles
   [RFC3819].  For instance, constrained nodes often use physical/link
   layer physical- /
   link-layer technologies that have been characterized as 'lossy',
   i.e., exhibit a relatively high bit error rate.  Dealing with
   corruption loss is one of the open issues in the Internet [RFC6077].

2.2.  Usage scenarios Scenarios

   There are different deployment and usage scenarios for CNNs.  Some
   CNNs follow the star topology, whereby one or several hosts are
   linked to a central device that acts as a router connecting the CNN
   to the Internet.  Alternatively, CNNs may also follow the multihop
   topology [RFC6606].

   In constrained environments, there can be different types of devices
   [RFC7228].  For example, there can be devices with a single combined
   send/receive buffer, devices with a separate send and receive buffer, or devices with a pool of
   multiple send/receive buffers.  In the latter case, it is possible
   that buffers are also shared for other protocols.

   One key use case for TCP in CNNs is a model where constrained devices
   connect to unconstrained servers in the Internet.  But it is also
   possible that both TCP endpoints run on constrained devices.  In the
   first case, communication will possibly has to traverse a middlebox (e.g. (e.g., a
   firewall, NAT, etc.).  Figure 1 illustrates such a scenario.  Note
   that the scenario is asymmetric, as the unconstrained device will
   typically not suffer the severe constraints of the constrained
   device.  The unconstrained device is expected to be mains-powered, to
   have a high amount of memory and processing power, and to be connected
   to a resource-rich network.

   Assuming that a majority of constrained devices will correspond to
   sensor nodes, the amount of data traffic sent by constrained devices
   (e.g.
   (e.g., sensor node measurements) is expected to be higher than the
   amount of data traffic in the opposite direction.  Nevertheless,
   constrained devices may receive requests (to which they may respond),
   commands (for configuration purposes and for constrained devices
   including actuators) actuators), and relatively infrequent firmware/software
   updates.

                                                      +---------------+
           o     o <-------- TCP communication -----> |               |
          o     o                                     |               |
             o     o                                  | Unconstrained |
       o        o              +-----------+          |    device     |
           o     o   o  ------ | Middlebox |  ------- |               |
            o   o              +-----------+          |  (e.g. (e.g., cloud) |
          o    o  o                                   |               |
                                                      +---------------+
      constrained
      Constrained devices

      Figure 1: TCP communication Communication between a constrained device Constrained Device and an
               unconstrained device, traversing
                Unconstrained Device, Traversing a middlebox. Middlebox

2.3.  Communication and traffic patterns Traffic Patterns

   IoT applications are characterized by a number of different
   communication patterns.  The following non-comprehensive list
   explains some typical examples:

   o

   Unidirectional transfers:  An IoT device (e.g. (e.g., a sensor) can send
      (repeatedly) send updates to the other endpoint.  There is not
      always a need for an application response back to the IoT device.

   o

   Request-response patterns:  An IoT device receiving a request from
      the other endpoint, which triggers a response from the IoT device.

   o

   Bulk data transfers:  A typical example for a long file transfer
      would be an IoT device firmware update.

   A typical communication pattern is that a constrained device
   communicates with an unconstrained device (cf. Figure 1).  But it is
   also possible that constrained devices communicate amongst
   themselves.

3.  TCP implementation Implementation and configuration Configuration in CNNs

   This section explains how a TCP stack can deal with typical
   constraints in CNN.  The guidance in this section relates to the TCP
   implementation and its configuration.

3.1.  Addressing path properties Path Properties

3.1.1.  Maximum Segment Size (MSS)

   Assuming that IPv6 is used, and for the sake of lightweight
   implementation and operation, unless applications require handling
   large data units (i.e. (i.e., leading to an IPv6 datagram size greater than
   1280 bytes), it may be desirable to limit the IP datagram size to
   1280 bytes in order to avoid the need to support Path MTU Discovery
   [RFC8201].  In addition, an IP datagram size of 1280 bytes avoids
   incurring IPv6-layer fragmentation [RFC8900].

   An IPv6 datagram size exceeding 1280 bytes can be avoided by setting
   the TCP MSS not larger than to 1220 bytes. bytes or less.  Note that it is already a
   requirement that for TCP implementations to consume payload space instead
   of increasing datagram size when including IP or TCP options in an IP
   packet to be sent [RFC6691].  Therefore, it is not required to
   advertise an MSS smaller than 1220 bytes in order to accommodate TCP
   options.

   Note that setting the MTU to 1280 bytes is possible for link layer link-layer
   technologies in the CNN space, even if some of them are characterized
   by a short data unit payload size, e.g. e.g., up to a few tens or hundreds
   of bytes.  For example, the maximum frame size in IEEE 802.15.4 is
   127 bytes.  6LoWPAN defined an adaptation layer to support IPv6 over
   IEEE 802.15.4 networks.  The adaptation layer includes a
   fragmentation mechanism, since IPv6 requires the layer below to
   support an MTU of 1280 bytes [RFC8200], while IEEE 802.15.4 lacked lacks
   fragmentation mechanisms.  6LoWPAN defines an IEEE 802.15.4 link MTU
   of 1280 bytes [RFC4944].  Other technologies, such as Bluetooth LE low
   energy [RFC7668], ITU-T G.9959 [RFC7428] [RFC7428], or DECT-ULE Digital Enhanced
   Cordless Telecommunications (DECT) Ultra Low Energy (ULE) [RFC8105],
   also use 6LoWPAN-based adaptation layers in order to enable IPv6
   support.  These technologies do support link layer link-layer fragmentation.  By
   exploiting this functionality, the adaptation layers that enable IPv6
   over such technologies also define an MTU of 1280 bytes.

   On the other hand, there exist technologies also used in the CNN
   space, such as Master Slave (MS) / Token Passing (TP) [RFC8163],
   Narrowband IoT (NB-IoT) [RFC8376] [RFC8376], or IEEE 802.11ah
   [I-D.delcarpio-6lo-wlanah], [6LO-WLANAH],
   that do not suffer the same degree of frame size limitations as the
   technologies mentioned above.  The MTU
   for MS/TP  It is recommended to that the MTU for MS/
   TP be 1500 bytes [RFC8163], [RFC8163]; the MTU in NB-
   IoT NB-IoT is 1600 bytes, and the
   maximum frame payload size for IEEE 802.11ah is 7991 bytes.

   Using a larger MSS (to a suitable extent) may be beneficial in some
   scenarios, especially when transferring large payloads, as it reduces
   the number of packets (and packet headers) required for a given
   payload.  However, the characteristics of the constrained network
   need to be considered.  In particular, in a lossy network where
   unreliable fragment delivery is used, the amount of data that TCP
   unnecessarily retransmits due to fragment loss increases (and
   throughput decreases) quickly with the MSS.  This happens because the
   loss of a fragment leads to the loss of the whole fragmented packet
   being transmitted.  Unnecessary data retransmission is particularly
   harmful in CNNs due to the resource constraints of such environments.
   Note that, while the original 6LoWPAN fragmentation mechanism
   [RFC4944] does not offer reliable fragment delivery, fragment
   recovery functionality for 6LoWPAN or 6Lo environments is being has been
   standardized as of the writing [I-D.ietf-6lo-fragment-recovery]. [RFC8931].

3.1.2.  Explicit Congestion Notification (ECN)

   Explicit Congestion Notification (ECN) [RFC3168]

   ECN [RFC3168] allows a router to signal in the IP header of a packet
   that congestion is arising, rising, for example example, when a queue size reaches a
   certain threshold.  An ECN-
   enabled ECN-enabled TCP receiver will echo back the
   congestion signal to the TCP sender by setting a flag in its next TCP ACK.
   Acknowledgment (ACK).  The sender triggers congestion control
   measures as if a packet loss had happened.

   The document

   RFC 8087 [RFC8087] outlines the principal gains in terms of increased
   throughput, reduced delay, and other benefits when ECN is used over a
   network path that includes equipment that supports Congestion
   Experienced (CE) marking.  In the context of CNNs, a remarkable
   feature of ECN is that congestion can be signalled signaled without incurring
   packet drops (which will lead to retransmissions and consumption of
   limited resources such as energy and bandwidth).

   ECN can further reduce packet losses since congestion control
   measures can be applied earlier [RFC2884].  Fewer lost packets
   implies that the number of retransmitted segments decreases, which is
   particularly beneficial in CNNs, where energy and bandwidth resources
   are typically limited.  Also, it makes sense to try to avoid packet
   drops for transactional workloads with small data sizes, which are
   typical for CNNs.  In such traffic patterns, it is more difficult and
   often impossible to detect packet loss without retransmission
   timeouts (e.g., as there may not be no three duplicate ACKs).  Any
   retransmission timeout slows down the data transfer significantly.
   In addition, if the constrained device uses power saving power-saving techniques,
   a retransmission timeout will incur a wake-up action, in contrast to
   ACK clock- triggered clock-triggered sending.  When the congestion window of a TCP
   sender has a size of one segment and a TCP ACK with an ECN signal
   (ECE
   (ECN-Echo (ECE) flag) arrives at the TCP sender, the TCP sender
   resets the retransmit timer, and the sender will only be able to send
   a new packet when the retransmit timer expires.  Effectively, at that
   moment, the TCP sender reduces at that moment its sending rate from 1 segment per
   Round Trip
   Round-Trip Time (RTT) to 1 segment per Retransmission Timeout (RTO)
   and reduces the sending rate further on each ECN signal received in
   subsequent TCP ACKs.  Otherwise, if an ECN signal is not present in a
   subsequent TCP ACK ACK, the TCP sender resumes the normal ACK-clocked
   transmission of segments [RFC3168].

   ECN can be incrementally deployed in the Internet.  Guidance on
   configuration and usage of ECN is provided in RFC 7567 [RFC7567].
   Given the benefits, more and more TCP stacks in the Internet support
   ECN, and it specifically makes sense to specifically leverage ECN in controlled
   environments such as CNNs.  As of the this writing, there is on-going ongoing work
   to extend the types of TCP packets that are ECN-capable, ECN capable, including
   pure ACKs [I-D.ietf-tcpm-generalized-ecn]. [TCPM-ECN].  Such a feature may further increase the
   benefits of ECN in CNN environments.  Note, however, that supporting
   ECN increases implementation complexity.

3.1.3.  Explicit loss notifications Loss Notifications

   There has been a significant body of research on solutions capable of
   explicitly indicating whether a TCP segment loss is due to
   corruption, in order to avoid activation of congestion control
   mechanisms [ETEN] [RFC2757].  While such solutions may provide
   significant improvement, they have not been widely deployed and
   remain as experimental work.  In fact, as of today, the IETF has not
   standardized any such solution.

3.2.  TCP guidance Guidance for single-MSS stacks Single-MSS Stacks

   This section discusses TCP stacks that allow transferring a single
   MSS.  More general guidance is provided in Section 3.3.

3.2.1.  Single-MSS stacks - benefits Stacks -- Benefits and issues Issues

   A TCP stack can reduce the memory requirements by advertising a TCP
   window size of one MSS, 1 MSS and also transmit transmit, at most one most, 1 MSS of
   unacknowledged data.  In that case, both congestion and flow control
   implementation are quite simple.  Such a small receive and send
   window may be sufficient for simple message exchanges in the CNN
   space.  However, only using a window of one 1 MSS can significantly
   affect performance.  A stop-and-wait operation results in low
   throughput for transfers that exceed the length of one 1 MSS, e.g., a
   firmware download.  Furthermore, a single-MSS solution relies solely
   on timer-based loss recovery, therefore missing the performance gain
   of Fast Retransmit and Fast Recovery (which require requires a larger window
   size,
   size; see Section 3.3.1).

   If CoAP is used over TCP with the default setting for NSTART in RFC
   7252 [RFC7252], a CoAP endpoint is not allowed to send a new message
   to a destination until a response for the previous message sent to
   that destination has been received.  This is equivalent to an application-
   layer
   application-layer window size of 1 data unit.  For this use of CoAP,
   a maximum TCP window of one 1 MSS may be sufficient, as long as the CoAP
   message size does not exceed one 1 MSS.  An exception in CoAP over TCP,
   though, is the Capabilities and Settings Message (CSM) that must be
   sent at the start of the TCP connection.  The first application
   message carrying user data is allowed to be sent immediately after
   the CSM message.  If the sum of the CSM size plus the application
   message size exceeds the MSS, a sender using a single-MSS stack will
   need to wait for the ACK confirming the CSM before sending the
   application message.

3.2.2.  TCP options Options for single-MSS stacks Single-MSS Stacks

   A TCP implementation needs to support, at a minimum, TCP options 2, 1
   1, and 0.  These are, respectively, the Maximum Segment Size (MSS) MSS option, the No-Operation
   option, and the End Of Option List marker [RFC0793].  None of these
   are a substantial burden to support.  These options are sufficient
   for interoperability with a standard-compliant TCP endpoint, albeit
   many TCP stacks support additional options and can negotiate their
   use.  A TCP implementation is permitted to silently ignore all other
   TCP options.

   A TCP implementation for a constrained device that uses a single-MSS
   TCP receive or transmit window size may not benefit from supporting
   the following TCP options: Window scale Scale [RFC7323], TCP Timestamps
   [RFC7323], Selective Acknowledgments Acknowledgment (SACK) [RFC2018], and SACK-Permitted SACK-
   Permitted [RFC2018].  Also  Also, other TCP options may not be required on
   a constrained device with a very lightweight implementation.  With
   regard to the Window scale Scale option, note that it is only useful if a
   window size greater than 64 kB is needed.

   Note that a TCP sender can benefit from the TCP Timestamps option
   [RFC7323] in detecting spurious RTOs.  The latter are quite likely to
   occur in CNN scenarios due to a number of reasons (e.g. (e.g., route
   changes in a multihop scenario, link layer link-layer retries, etc.).  The
   header overhead incurred by the Timestamps option (of up to 12 bytes)
   needs to be taken into account.

3.2.3.  Delayed Acknowledgments for single-MSS stacks Single-MSS Stacks

   TCP Delayed Acknowledgments are meant to reduce the number of ACKs
   sent within a TCP connection, thus reducing network overhead, but
   they may increase the time until a sender may receive an ACK.  In
   general, usefulness of Delayed ACKs depends heavily on the usage
   scenario (see Section 3.3.2).  There can be interactions with single-
   MSS stacks.

   When traffic is unidirectional, if the sender can send at most one 1 MSS
   of data or the receiver advertises a receive window not greater than
   the MSS, Delayed ACKs may unnecessarily contribute delay (up to 500
   ms) to the RTT [RFC5681], which limits the throughput and can
   increase data delivery time.  Note that, in some cases, it may not be
   possible to disable Delayed ACKs.  One known workaround is to split
   the data to be sent into two segments of smaller size.  A standard standard-
   compliant TCP receiver may immediately acknowledge the second MSS of
   data, which can improve throughput.  However, this 'split hack' "split hack" may
   not always work since a TCP receiver is required to acknowledge every
   second full-sized segment, but not two consecutive small segments.
   The overhead of sending two IP packets instead of one is another
   downside of the 'split hack'. "split hack".

   Similar issues may happen when the sender uses the Nagle algorithm,
   since the sender may need to wait for an unnecessarily delayed Delayed ACK to
   send a new segment.  Disabling the algorithm will not have impact if
   the sender can only handle stop-and-wait operation at the TCP level.

   For request-response traffic, when the receiver uses Delayed ACKs, a
   response to a data message can piggyback an ACK, as long as the
   latter is sent before the Delayed ACK timer expires, thus avoiding
   unnecessary ACKs without payload.  Disabling Delayed ACKs at the
   request sender allows an immediate ACK for the data segment carrying
   the response.

3.2.4.  RTO calculation Calculation for single-MSS stacks Single-MSS Stacks

   The RTO calculation is one of the fundamental TCP algorithms
   [RFC6298].  There is a fundamental trade-off: A a short, aggressive RTO
   behavior reduces wait time before retransmissions, but it also
   increases the probability of spurious timeouts.  The latter lead leads to
   unnecessary waste of potentially scarce resources in CNNs such as
   energy and bandwidth.  In contrast, a conservative timeout can result
   in long error recovery times and thus and, thus, needlessly delay data
   delivery.

   If a TCP sender uses a very small window size, and it cannot benefit
   from Fast Retransmit/Fast Retransmit and Fast Recovery or SACK, the RTO algorithm has
   a large impact on performance.  In that case, RTO algorithm tuning
   may be considered, although careful assessment of possible drawbacks
   is recommended [I-D.ietf-tcpm-rto-consider]. [RFC8961].

   As an example, adaptive RTO algorithms defined for CoAP over UDP have
   been found to perform well in CNN scenarios [Commag]
   [I-D.ietf-core-fasor]. [CORE-FASOR].

3.3.  General recommendations Recommendations for TCP in CNNs

   This section summarizes some widely used techniques to improve TCP,
   with a focus on their use in CNNs.  The TCP extensions discussed here
   are useful in a wide range of network scenarios, including CNNs.
   This section is not comprehensive.  A comprehensive survey of TCP
   extensions is published in RFC 7414 [RFC7414].

3.3.1.  Loss recovery Recovery and congestion/flow control Congestion/Flow Control

   Devices that have enough memory to allow a larger (i.e. (i.e., more than 3
   MSS of data) TCP window size can leverage a more efficient loss
   recovery than the timer-based approach used for a smaller TCP window
   size (see Section 3.2.1) by using Fast Retransmit and Fast Recovery
   [RFC5681], at the expense of slightly greater complexity and
   Transmission Control Block (TCB) size.  Assuming that Delayed ACKs
   are used by the receiver, a window size of up to 5 MSS is required
   for Fast Retransmit and Fast Recovery to work efficiently: If in a given
   TCP transmission of full-sized segments 1, 2, 3, 4, and 5, if segment
   2 gets lost, and the ACK for segment 1 is held by the Delayed ACK
   timer, then the sender should get an ACK for segment 1 when 3 arrives
   and duplicate ACKs when segments 4, 5, and 6 arrive.  It will
   retransmit segment 2 when the third duplicate ACK arrives.  In order
   to have segments 2, 3, 4, 5, and 6 sent, the window has to be of at
   least 5 MSS.  With an MSS of 1220 bytes, a buffer of a size of 5 MSS
   would require 6100 bytes.

   The example in the previous paragraph did not use a further TCP
   improvement such as Limited Transmit [RFC3042].  The latter may also
   be useful for any transfer that has more than one segment in flight.
   Small transfers tend to benefit more from Limited Transmit, because
   they are more likely to not receive enough duplicate ACKs.  Assuming
   the example in the previous paragraph, Limited Transmit allows
   sending 5 MSS with a congestion window (cwnd) of 3 three segments, plus
   two additional segments for the first two duplicate ACKs.  With
   Limited Transmit, even a cwnd of 2 two segments allows sending 5 MSS,
   at the expense of additional delay contributed by the Delayed ACK
   timer for the ACK that confirms segment 1.

   When a multiple-segment window is used, the receiver will need to
   manage the reception of possible out-of-order received segments,
   requiring sufficient buffer space.  Note that even when a 1-MSS window of 1
   MSS is used, out-of-order arrival should also be managed, as the
   sender may send multiple sub-MSS packets that fit in the window.  (On
   the other hand, the receiver is free to simply drop out-of-order
   segments, thus forcing retransmissions). retransmissions.)

3.3.1.1.  Selective Acknowledgments (SACK) (SACKs)

   If a device with less severe memory and processing constraints can
   afford advertising a TCP window size of several MSS, MSSs, it makes sense
   to support the SACK option to improve performance.  SACK allows a
   data receiver to inform the data sender of non-contiguous data blocks
   received, thus a sender (having previously sent the SACK-Permitted
   option) can avoid performing unnecessary retransmissions, saving
   energy and bandwidth, as well as reducing latency.  In addition, SACK
   often allows for faster loss recovery when there is more than one
   lost segment in a window of data, since SACK recovery may complete
   with less RTTs.  SACK is particularly useful for bulk data transfers.
   A receiver supporting SACK will need to keep track of the data blocks
   that need to be received.  The sender will also need to keep track of
   which data segments need to be resent after learning which data
   blocks are missing at the receiver.  SACK adds 8*n+2 bytes to the TCP
   header, where n denotes the number of data blocks received, up to 4
   four blocks.  For a low number of out-of-order segments, the header
   overhead penalty of SACK is compensated by avoiding unnecessary
   retransmissions.  When the sender discovers the data blocks that have
   already been received, it needs to also store the necessary state to
   avoid unnecessary retransmission of data segments that have already
   been received.

3.3.2.  Delayed Acknowledgments

   For certain traffic patterns, Delayed ACKs may have a detrimental
   effect, as already noted in Section 3.2.3.  Advanced TCP stacks may
   use heuristics to determine the maximum delay for an ACK.  For CNNs,
   the recommendation depends on the expected communication patterns.

   When traffic over a CNN is expected to mostly to be unidirectional
   messages with a size typically up to one 1 MSS, and the time between two
   consecutive message transmissions is greater than the Delayed ACK
   timeout, it may make sense to use a smaller timeout or disable
   Delayed ACKs at the receiver.  This avoids incurring additional
   delay, as well as the energy consumption of the sender (which might
   e.g. might,
   e.g., keep its radio interface in receive mode) during that time.
   Note that disabling Delayed ACKs may only be possible if the peer
   device is administered by the same entity managing the constrained
   device.  For request-response traffic, enabling Delayed ACKs is
   recommended at the server end, in order to allow combining a response
   with the ACK into a single segment, thus increasing efficiency.  In
   addition, if a client issues requests infrequently, disabling Delayed
   ACKs at the client allows an immediate ACK for the data segment
   carrying the response.

   In contrast, Delayed ACKs allow to reduce the for a reduced number of ACKs in bulk
   transfer type types of traffic, e.g. e.g., for firmware/software updates or for
   transferring larger data units containing a batch of sensor readings.

   Note that, in many scenarios, the peer that a constrained device
   communicates with will be a general purpose system that communicates
   with both constrained and unconstrained devices.  Since delayed Delayed ACKs
   are often configured through system-wide parameters, delayed ACKs the behavior of
   Delayed ACKs at the peer will be the same regardless of the nature of
   the endpoints it talks to.  Such a peer will typically have delayed Delayed
   ACKs enabled.

3.3.3.  Initial Window

   RFC 5681

   [RFC5681] specifies a TCP Initial Window (IW) of roughly 4 kB
   [RFC5681]. kB.
   Subsequently, RFC 6928 defined [RFC6928] defines an experimental new value
   for the IW, which in practice will result in an IW of 10 MSS
   [RFC6928].  The MSS.
   Nowadays, the latter is nowadays used in many TCP implementations.

   Note that a 10-MSS IW was recommended for resource-rich environments
   (e.g.
   (e.g., broadband environments), which are significantly different
   from CNNs.  In CNNs, many application layer application-layer data units are relatively
   small (e.g. (e.g., below one 1 MSS).  However, larger objects (e.g. (e.g., large
   files containing sensor readings, firmware updates, etc.) may also
   need to be transferred in CNNs.  If such a large object is
   transferred in CNNs, with an IW setting of 10 MSS, there is
   significant buffer overflow risk, since many CNN devices support
   network or radio buffers of a size smaller than 10 MSS.  In order to
   avoid such a problem, in CNNs the IW needs to be carefully set, set in CNNs, based
   on device and network resource constraints.  In many cases, a safe IW
   setting will be smaller than 10 MSS.

4.  TCP usage recommendations Usage Recommendations in CNNs

   This section discusses how TCP can be used by applications that are
   developed for CNN scenarios.  These remarks are by and large
   independent of how TCP is exactly implemented.

4.1.  TCP connection initiation Connection Initiation

   In the scenario of a constrained device to an unconstrained device scenario
   illustrated above, a TCP connection is typically initiated by the
   constrained device, in order for this the device to support possible sleep
   periods to save energy.

4.2.  Number of concurrent connections Concurrent Connections

   TCP endpoints with a small amount of memory may only support a small
   number of connections.  Each TCP connection requires storing a number
   of variables in the TCB.  Depending on the internal TCP
   implementation, each connection may result in further memory
   overhead, and connections may compete for scarce resources (e.g. (e.g.,
   further memory overhead for send and receive buffers, etc). etc.).

   A careful application design may try to keep the number of concurrent
   connections as small as possible.  A client can can, for instance instance, limit
   the number of simultaneous open connections that it maintains to a
   given server.  Multiple connections could could, for instance instance, be used to
   avoid the "head-of-line blocking" problem in an application transfer.
   However, in addition to consuming resources, using multiple
   connections can also cause undesirable side effects in congested
   networks.  For example, the HTTP/1.1 specification encourages clients
   to be conservative when opening multiple connections [RFC7230].
   Furthermore, each new connection will start with a 3-way three-way
   handshake, therefore increasing message overhead.

   Being conservative when opening multiple TCP connections is of
   particular importance in Constrained-Node Networks.

4.3.  TCP connection lifetime Connection Lifetime

   In order to minimize message overhead, it makes sense to keep a TCP
   connection open as long as the two TCP endpoints have more data to
   send.  If applications exchange data rather infrequently, i.e., if
   TCP connections would stay idle for a long time, the idle time can
   result in problems.  For instance, certain middleboxes such as
   firewalls or NAT devices are known to delete state records after an
   inactivity interval.  RFC 5382 [RFC5382] specifies a minimum value
   for such an interval of 124 minutes.  Measurement studies have
   reported that TCP NAT binding timeouts are highly variable across
   devices, with a the median being around 60 minutes, the shortest
   timeout being around 2 minutes, and more than 50% of the devices with
   a timeout shorter than the aforementioned minimum timeout of 124
   minutes [HomeGateway].  The timeout duration used by a middlebox
   implementation may not be known to the TCP endpoints.

   In CNNs, such middleboxes may e.g. may, e.g., be present at the boundary
   between the CNN and other networks.  If the middlebox can be
   optimized for CNN use cases, it makes sense to increase the initial
   value for filter state inactivity timers to avoid problems with idle
   connections.  Apart from that, this problem can be dealt with by
   different connection handling connection-handling strategies, each having pros and cons.

   One approach for infrequent data transfer is to use short-lived TCP
   connections.  Instead of trying to maintain a TCP connection for a
   long time, possibly it is possible that short-lived connections can be opened
   between two endpoints, which are closed if no more data needs to be
   exchanged.  For use cases that can cope with the additional messages
   and the latency resulting from starting new connections, it is
   recommended to use a sequence of short-lived connections, connections instead of
   maintaining a single long-lived connection.

   The message and latency overhead that stems from using a sequence of
   short-lived connections could be reduced by TCP Fast Open (TFO)
   [RFC7413], which is an experimental TCP extension, at the expense of
   increased implementation complexity and increased TCP Control Block
   (TCB) TCB size.  TFO
   allows data to be carried in SYN (and SYN-ACK)
   segments, segments and to be
   consumed immediately by the receiving endpoint.  This reduces the
   message and latency overhead compared to the traditional three-way
   handshake to establish a TCP connection.  For security reasons, the
   connection initiator has to request a TFO cookie from the other
   endpoint.  The cookie, with a size of 4 or 16 bytes, is then included
   in SYN packets of subsequent connections.  The cookie needs to be
   refreshed (and obtained by the client) after a certain amount of
   time.  While a given cookie is used for multiple connections between
   the same two endpoints, the latter may become vulnerable to privacy
   threats.  In addition, a valid cookie may be stolen from a
   compromised host and may be used to perform SYN flood attacks, as
   well as amplified reflection attacks to victim hosts (see Section 5
   of RFC 7413). [RFC7413]).  Nevertheless, TFO is more efficient than frequently
   opening new TCP connections with the traditional three-way handshake,
   as long as the cookie can be reused in subsequent connections.
   However, as stated in RFC 7413, [RFC7413], TFO deviates from the standard TCP
   semantics, since the data in the SYN could be replayed to an
   application in some rare circumstances.  Applications should not use
   TFO unless they can tolerate this issue, e.g., by using
   Transport Layer Security (TLS) TLS
   [RFC7413].  A comprehensive discussion on TFO can be found at in RFC 7413.
   7413 [RFC7413].

   Another approach is to use long-lived TCP connections with
   application-layer heartbeat messages.  Various application protocols
   support such heartbeat messages (e.g. (e.g., CoAP over TCP [RFC8323]).
   Periodic application-layer heartbeats can prevent early filter state
   record deletion in middleboxes.  If the TCP binding timeout for a
   middlebox to be traversed by a given connection is known, middlebox
   filter state deletion will be avoided if the heartbeat period is
   lower than the middlebox TCP binding timeout.  Otherwise, the
   implementer needs to take into account that middlebox TCP binding
   timeouts fall in a wide range of possible values [HomeGateway], and
   it may be hard to find a proper heartbeat period for application-
   layer heartbeat messages.

   One specific advantage of Heartbeat heartbeat messages is that they also allow
   aliveness
   liveness checks at the application level.  In general, it makes sense
   to realize aliveness liveness checks at the highest protocol layer possible
   that is meaningful to the application, in order to maximize the depth
   of the aliveness liveness check.  In addition, timely detection of a dead peer
   may allow savings in terms of TCB memory use.  However, the
   transmission of heartbeat messages consumes resources.  This aspect
   needs to be assessed carefully, considering the characteristics of
   each specific CNN.

   A TCP implementation may also be able to send "keep-alive" segments
   to test a TCP connection.  According to [RFC1122], "keep-alives" keep-alives are an
   optional TCP mechanism that is turned off by default, i.e., an
   application must explicitly enable it for a TCP connection.  The
   interval between "keep-alive" keep-alive messages must be configurable configurable, and it
   must default to no less than two hours.  With this large timeout, TCP
   keep-alive messages might not always be useful to avoid deletion of
   filter state records in some middleboxes.  However, sending TCP keep-
   alive probes more frequently risks draining power on energy-
   constrained devices.

5.  Security Considerations

   Best current practice practices for securing TCP and TCP-based communication
   also applies to CNN.  As an example, use of Transport Layer Security
   (TLS) TLS [RFC8446] is strongly
   recommended if it is applicable.  However, note that TLS protects
   only the contents of the data segments.

   There are TCP options which that can actually protect the transport layer.
   One example is the TCP Authentication Option (TCP-AO) [RFC5925].
   However, this option adds overhead and complexity.  TCP-AO typically
   has a size of 16-20 bytes.  An implementer needs to asses the trade-
   off between security and performance when using TCP-AO, considering
   the characteristics (in terms of energy, bandwidth bandwidth, and computational
   power) of the environment where TCP will be used.

   For the mechanisms discussed in this document, the corresponding
   considerations apply.  For instance, if TFO is used, the security
   considerations of RFC 7413 [RFC7413] apply.

   Constrained devices are expected to support smaller TCP window sizes
   than less limited less-limited devices.  In such conditions, segment
   retransmission triggered by RTO expiration is expected to be
   relatively frequent, due to lack of (enough) duplicate ACKs,
   especially when a constrained device uses a single-MSS
   implementation.  For this reason, constrained devices running TCP may
   appear as particularly appealing victims of the so-called "shrew"
   Denial of Service
   Denial-of-Service (DoS) attack [shrew], [SHREW], whereby one or more sources
   generate a packet spike targeted to coincide with consecutive RTO-
   expiration-triggered retry attempts of a victim node.  Note that the
   attack may be performed by Internet-connected devices, including
   constrained devices in the same CNN as the victim, as well as remote
   ones.  Mitigation techniques include RTO randomization and attack
   blocking by routers able to detect shrew attacks based on their
   traffic pattern.

9.

6.  IANA Considerations

   This document has no IANA actions.

7.  References

9.1.

7.1.  Normative References

   [RFC0793]  Postel, J., "Transmission Control Protocol", STD 7,
              RFC 793, DOI 10.17487/RFC0793, September 1981,
              <https://www.rfc-editor.org/info/rfc793>.

   [RFC1122]  Braden, R., Ed., "Requirements for Internet Hosts -
              Communication Layers", STD 3, RFC 1122,
              DOI 10.17487/RFC1122, October 1989,
              <https://www.rfc-editor.org/info/rfc1122>.

   [RFC2018]  Mathis, M., Mahdavi, J., Floyd, S., and A. Romanow, "TCP
              Selective Acknowledgment Options", RFC 2018,
              DOI 10.17487/RFC2018, October 1996,
              <https://www.rfc-editor.org/info/rfc2018>.

   [RFC3042]  Allman, M., Balakrishnan, H., and S. Floyd, "Enhancing
              TCP's Loss Recovery Using Limited Transmit", RFC 3042,
              DOI 10.17487/RFC3042, January 2001,
              <https://www.rfc-editor.org/info/rfc3042>.

   [RFC3168]  Ramakrishnan, K., Floyd, S., and D. Black, "The Addition
              of Explicit Congestion Notification (ECN) to IP",
              RFC 3168, DOI 10.17487/RFC3168, September 2001,
              <https://www.rfc-editor.org/info/rfc3168>.

   [RFC5681]  Allman, M., Paxson, V., and E. Blanton, "TCP Congestion
              Control", RFC 5681, DOI 10.17487/RFC5681, September 2009,
              <https://www.rfc-editor.org/info/rfc5681>.

   [RFC6298]  Paxson, V., Allman, M., Chu, J., and M. Sargent,
              "Computing TCP's Retransmission Timer", RFC 6298,
              DOI 10.17487/RFC6298, June 2011,
              <https://www.rfc-editor.org/info/rfc6298>.

   [RFC6691]  Borman, D., "TCP Options and Maximum Segment Size (MSS)",
              RFC 6691, DOI 10.17487/RFC6691, July 2012,
              <https://www.rfc-editor.org/info/rfc6691>.

   [RFC6928]  Chu, J., Dukkipati, N., Cheng, Y., and M. Mathis,
              "Increasing TCP's Initial Window", RFC 6928,
              DOI 10.17487/RFC6928, April 2013,
              <https://www.rfc-editor.org/info/rfc6928>.

   [RFC7228]  Bormann, C., Ersue, M., and A. Keranen, "Terminology for
              Constrained-Node Networks", RFC 7228,
              DOI 10.17487/RFC7228, May 2014,
              <https://www.rfc-editor.org/info/rfc7228>.

   [RFC7323]  Borman, D., Braden, B., Jacobson, V., and R.
              Scheffenegger, Ed., "TCP Extensions for High Performance",
              RFC 7323, DOI 10.17487/RFC7323, September 2014,
              <https://www.rfc-editor.org/info/rfc7323>.

   [RFC7413]  Cheng, Y., Chu, J., Radhakrishnan, S., and A. Jain, "TCP
              Fast Open", RFC 7413, DOI 10.17487/RFC7413, December 2014,
              <https://www.rfc-editor.org/info/rfc7413>.

   [RFC7567]  Baker, F., Ed. and G. Fairhurst, Ed., "IETF
              Recommendations Regarding Active Queue Management",
              BCP 197, RFC 7567, DOI 10.17487/RFC7567, July 2015,
              <https://www.rfc-editor.org/info/rfc7567>.

   [RFC8200]  Deering, S. and R. Hinden, "Internet Protocol, Version 6
              (IPv6) Specification", STD 86, RFC 8200,
              DOI 10.17487/RFC8200, July 2017,
              <https://www.rfc-editor.org/info/rfc8200>.

9.2.

7.2.  Informative References

   [6LO-WLANAH]
              Del Carpio Vega, L., Robles, M., and R. Morabito, "IPv6
              over 802.11ah", Work in Progress, Internet-Draft, draft-
              delcarpio-6lo-wlanah-01, 19 October 2015,
              <https://tools.ietf.org/html/draft-delcarpio-6lo-wlanah-
              01>.

   [Commag]   A.   Betzler, C. A., Gomez, I. C., Demirkol, I., and J. Paradells,
              "CoAP Congestion Control for the Internet of Things", IEEE
              Communications Magazine, June 2016. Vol. 54, Issue 7, pp. 154-160,
              DOI 10.1109/MCOM.2016.7509394, July 2016,
              <https://doi.org/10.1109/MCOM.2016.7509394>.

   [CORE-FASOR]
              Jarvinen, I., Kojo, M., Raitahila, I., and Z. Cao, "Fast-
              Slow Retransmission Timeout and Congestion Control
              Algorithm for CoAP", Work in Progress, Internet-Draft,
              draft-ietf-core-fasor-01, 19 October 2020,
              <https://tools.ietf.org/html/draft-ietf-core-fasor-01>.

   [Dunk]     A.     Dunkels, A., "Full TCP/IP for 8-Bit Architectures", 2003.
              MobiSys '03, pp. 85-98, DOI 10.1145/1066116.106611, May
              2003, <https://doi.org/10.1145/1066116.106611>.

   [ETEN]     R. Krishnan et al,     Krishnan, R., Sterbenz, J., Eddy, W., and C. Partridge,
              "Explicit transport error notification (ETEN) for error-prone error-
              prone wireless and satellite networks", Computer Networks 2004. Networks,
              DOI 10.1016/j.comnet.2004.06.012, June 2004,
              <https://doi.org/10.1016/j.comnet.2004.06.012>.

   [GNRC]     Lenders, M., Kietzmann, P., Hahm, O., Petersen, H.,
              Gündoğa, C., Baccelli, E., Schleiser, K., Schmidt, T., and
              M. Lenders et al., Wählisch, "Connecting the World of Embedded Mobiles:
              The RIOTApproach RIOT Approach to Ubiquitous Networking for the IoT",
              arXiv:1801.02833v1 [cs.NI], January 2018.

   [HomeGateway]
              Haetoenen, S., Nyrhinen, A., Eggert, L., Strowes, S.,
              Sarolahti, P., and M. Kojo, "An Experimental Study of Home
              Gateway Characteristics", Proceedings of the 10th ACM
              SIGCOMM conference on Internet measurement 2010.

   [I-D.delcarpio-6lo-wlanah]
              Vega, L., Robles, I., and R. Morabito, "IPv6 over
              802.11ah", draft-delcarpio-6lo-wlanah-01 (work in
              progress), October 2015.

   [I-D.ietf-6lo-fragment-recovery]
              Thubert, P., "6LoWPAN Selective Fragment Recovery", draft-
              ietf-6lo-fragment-recovery-21 (work in progress), March
              2020.

   [I-D.ietf-core-fasor]
              Jarvinen, I., Kojo, M., Raitahila, I., and Z. Cao, "Fast-
              Slow Retransmission Timeout and Congestion Control
              Algorithm for CoAP", draft-ietf-core-fasor-01 (work in
              progress), October 2020.

   [I-D.ietf-tcpm-generalized-ecn]
              Bagnulo, M. and B. Briscoe, "ECN++: Adding Explicit
              Congestion Notification (ECN) to TCP Control Packets",
              draft-ietf-tcpm-generalized-ecn-05 (work in progress), measurement, pp. 260-266,
              DOI 10.1145/1879141.1879174, November 2019.

   [I-D.ietf-tcpm-rto-consider]
              Allman, M., "Requirements for Time-Based Loss Detection",
              draft-ietf-tcpm-rto-consider-17 (work in progress), July
              2020. 2010,
              <https://doi.org/10.1145/1879141.1879174>.

   [IntComp]  C.  Gomez, A. C., Arcia-Moret, A., and J. Crowcroft, "TCP in the
              Internet of Things: from ostracism Ostracism to prominence", Prominence", IEEE
              Internet Computing, January-February 2018. Vol. 22, Issue 1, pp. 29-41,
              DOI 10.1109/MIC.2018.112102200, January 2018,
              <https://doi.org/10.1109/MIC.2018.112102200>.

   [MQTT]     ISO/IEC 20922:2016, "Message     ISO/IEC, "Information technology -- Message Queuing
              Telemetry Transport (MQTT) v3.1.1", ISO/IEC 20922:2016,
              June 2016.

   [RFC2757]  Montenegro, G., Dawkins, S., Kojo, M., Magret, V., and N.
              Vaidya, "Long Thin Networks", RFC 2757,
              DOI 10.17487/RFC2757, January 2000,
              <https://www.rfc-editor.org/info/rfc2757>.

   [RFC2884]  Hadi Salim, J. and U. Ahmed, "Performance Evaluation of
              Explicit Congestion Notification (ECN) in IP Networks",
              RFC 2884, DOI 10.17487/RFC2884, July 2000,
              <https://www.rfc-editor.org/info/rfc2884>.

   [RFC3481]  Inamura, H., Ed., Montenegro, G., Ed., Ludwig, R., Gurtov,
              A., and F. Khafizov, "TCP over Second (2.5G) and Third
              (3G) Generation Wireless Networks", BCP 71, RFC 3481,
              DOI 10.17487/RFC3481, February 2003,
              <https://www.rfc-editor.org/info/rfc3481>.

   [RFC3819]  Karn, P., Ed., Bormann, C., Fairhurst, G., Grossman, D.,
              Ludwig, R., Mahdavi, J., Montenegro, G., Touch, J., and L.
              Wood, "Advice for Internet Subnetwork Designers", BCP 89,
              RFC 3819, DOI 10.17487/RFC3819, July 2004,
              <https://www.rfc-editor.org/info/rfc3819>.

   [RFC4944]  Montenegro, G., Kushalnagar, N., Hui, J., and D. Culler,
              "Transmission of IPv6 Packets over IEEE 802.15.4
              Networks", RFC 4944, DOI 10.17487/RFC4944, September 2007,
              <https://www.rfc-editor.org/info/rfc4944>.

   [RFC5382]  Guha, S., Ed., Biswas, K., Ford, B., Sivakumar, S., and P.
              Srisuresh, "NAT Behavioral Requirements for TCP", BCP 142,
              RFC 5382, DOI 10.17487/RFC5382, October 2008,
              <https://www.rfc-editor.org/info/rfc5382>.

   [RFC5925]  Touch, J., Mankin, A., and R. Bonica, "The TCP
              Authentication Option", RFC 5925, DOI 10.17487/RFC5925,
              June 2010, <https://www.rfc-editor.org/info/rfc5925>.

   [RFC6077]  Papadimitriou, D., Ed., Welzl, M., Scharf, M., and B.
              Briscoe, "Open Research Issues in Internet Congestion
              Control", RFC 6077, DOI 10.17487/RFC6077, February 2011,
              <https://www.rfc-editor.org/info/rfc6077>.

   [RFC6120]  Saint-Andre, P., "Extensible Messaging and Presence
              Protocol (XMPP): Core", RFC 6120, DOI 10.17487/RFC6120,
              March 2011, <https://www.rfc-editor.org/info/rfc6120>.

   [RFC6282]  Hui, J., Ed. and P. Thubert, "Compression Format for IPv6
              Datagrams over IEEE 802.15.4-Based Networks", RFC 6282,
              DOI 10.17487/RFC6282, September 2011,
              <https://www.rfc-editor.org/info/rfc6282>.

   [RFC6550]  Winter, T., Ed., Thubert, P., Ed., Brandt, A., Hui, J.,
              Kelsey, R., Levis, P., Pister, K., Struik, R., Vasseur,
              JP., and R. Alexander, "RPL: IPv6 Routing Protocol for
              Low-Power and Lossy Networks", RFC 6550,
              DOI 10.17487/RFC6550, March 2012,
              <https://www.rfc-editor.org/info/rfc6550>.

   [RFC6606]  Kim, E., Kaspar, D., Gomez, C., and C. Bormann, "Problem
              Statement and Requirements for IPv6 over Low-Power
              Wireless Personal Area Network (6LoWPAN) Routing",
              RFC 6606, DOI 10.17487/RFC6606, May 2012,
              <https://www.rfc-editor.org/info/rfc6606>.

   [RFC6775]  Shelby, Z., Ed., Chakrabarti, S., Nordmark, E., and C.
              Bormann, "Neighbor Discovery Optimization for IPv6 over
              Low-Power Wireless Personal Area Networks (6LoWPANs)",
              RFC 6775, DOI 10.17487/RFC6775, November 2012,
              <https://www.rfc-editor.org/info/rfc6775>.

   [RFC7230]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Message Syntax and Routing",
              RFC 7230, DOI 10.17487/RFC7230, June 2014,
              <https://www.rfc-editor.org/info/rfc7230>.

   [RFC7252]  Shelby, Z., Hartke, K., and C. Bormann, "The Constrained
              Application Protocol (CoAP)", RFC 7252,
              DOI 10.17487/RFC7252, June 2014,
              <https://www.rfc-editor.org/info/rfc7252>.

   [RFC7414]  Duke, M., Braden, R., Eddy, W., Blanton, E., and A.
              Zimmermann, "A Roadmap for Transmission Control Protocol
              (TCP) Specification Documents", RFC 7414,
              DOI 10.17487/RFC7414, February 2015,
              <https://www.rfc-editor.org/info/rfc7414>.

   [RFC7428]  Brandt, A. and J. Buron, "Transmission of IPv6 Packets
              over ITU-T G.9959 Networks", RFC 7428,
              DOI 10.17487/RFC7428, February 2015,
              <https://www.rfc-editor.org/info/rfc7428>.

   [RFC7540]  Belshe, M., Peon, R., and M. Thomson, Ed., "Hypertext
              Transfer Protocol Version 2 (HTTP/2)", RFC 7540,
              DOI 10.17487/RFC7540, May 2015,
              <https://www.rfc-editor.org/info/rfc7540>.

   [RFC7668]  Nieminen, J., Savolainen, T., Isomaki, M., Patil, B.,
              Shelby, Z., and C. Gomez, "IPv6 over BLUETOOTH(R) Low
              Energy", RFC 7668, DOI 10.17487/RFC7668, October 2015,
              <https://www.rfc-editor.org/info/rfc7668>.

   [RFC8087]  Fairhurst, G. and M. Welzl, "The Benefits of Using
              Explicit Congestion Notification (ECN)", RFC 8087,
              DOI 10.17487/RFC8087, March 2017,
              <https://www.rfc-editor.org/info/rfc8087>.

   [RFC8105]  Mariager, P., Petersen, J., Ed., Shelby, Z., Van de Logt,
              M., and D. Barthel, "Transmission of IPv6 Packets over
              Digital Enhanced Cordless Telecommunications (DECT) Ultra
              Low Energy (ULE)", RFC 8105, DOI 10.17487/RFC8105, May
              2017, <https://www.rfc-editor.org/info/rfc8105>.

   [RFC8163]  Lynn, K., Ed., Martocci, J., Neilson, C., and S.
              Donaldson, "Transmission of IPv6 over Master-Slave/Token-
              Passing (MS/TP) Networks", RFC 8163, DOI 10.17487/RFC8163,
              May 2017, <https://www.rfc-editor.org/info/rfc8163>.

   [RFC8201]  McCann, J., Deering, S., Mogul, J., and R. Hinden, Ed.,
              "Path MTU Discovery for IP version 6", STD 87, RFC 8201,
              DOI 10.17487/RFC8201, July 2017,
              <https://www.rfc-editor.org/info/rfc8201>.

   [RFC8323]  Bormann, C., Lemay, S., Tschofenig, H., Hartke, K.,
              Silverajan, B., and B. Raymor, Ed., "CoAP (Constrained
              Application Protocol) over TCP, TLS, and WebSockets",
              RFC 8323, DOI 10.17487/RFC8323, February 2018,
              <https://www.rfc-editor.org/info/rfc8323>.

   [RFC8352]  Gomez, C., Kovatsch, M., Tian, H., and Z. Cao, Ed.,
              "Energy-Efficient Features of Internet of Things
              Protocols", RFC 8352, DOI 10.17487/RFC8352, April 2018,
              <https://www.rfc-editor.org/info/rfc8352>.

   [RFC8376]  Farrell, S., Ed., "Low-Power Wide Area Network (LPWAN)
              Overview", RFC 8376, DOI 10.17487/RFC8376, May 2018,
              <https://www.rfc-editor.org/info/rfc8376>.

   [RFC8446]  Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
              <https://www.rfc-editor.org/info/rfc8446>.

   [RFC8900]  Bonica, R., Baker, F., Huston, G., Hinden, R., Troan, O.,
              and F. Gont, "IP Fragmentation Considered Fragile",
              BCP 230, RFC 8900, DOI 10.17487/RFC8900, September 2020,
              <https://www.rfc-editor.org/info/rfc8900>.

   [RFC8931]  Thubert, P., Ed., "IPv6 over Low-Power Wireless Personal
              Area Network (6LoWPAN) Selective Fragment Recovery",
              RFC 8931, DOI 10.17487/RFC8931, November 2020,
              <https://www.rfc-editor.org/info/rfc8931>.

   [RFC8961]  Allman, M., "Requirements for Time-Based Loss Detection",
              BCP 233, RFC 8961, DOI 10.17487/RFC8961, November 2020,
              <https://www.rfc-editor.org/info/rfc8961>.

   [RIOT]     E. Baccelli et al.,     Baccelli, E., Gündoğa, C., Hahm, O., Kietzmann, P.,
              Lenders, M., Petersen, H., Schleiser, K., Schmidt, T., and
              M. Wählisch, "RIOT: an An Open Source Operating
              Systemfor Low-end System for
              Low-End Embedded Devices in the IoT", 2018.

   [shrew] IEEE Internet of
              Things Journal, Vol. 5, Issue 6,
              DOI 10.1109/JIOT.2018.2815038, March 2018,
              <https://doi.org/10.1109/JIOT.2018.2815038>.

   [SHREW]    Nyrhinen, A. Kuzmanovic, and E. Knightly, "Low-Rate TCP-Targeted
              Denial of Service Attacks", SIGCOMM'03 2003.

7.  Annex. Attacks (The Shrew vs. the Mice and
              Elephants)", SIGCOMM'03, DOI 10.1145/863955.863966, August
              2003, <https://doi.org/10.1145/863955.863966>.

   [TCPM-ECN] Bagnulo, M. and B. Briscoe, "ECN++: Adding Explicit
              Congestion Notification (ECN) to TCP implementations Control Packets",
              Work in Progress, Internet-Draft, draft-ietf-tcpm-
              generalized-ecn-07, 16 February 2021,
              <https://tools.ietf.org/html/draft-ietf-tcpm-generalized-
              ecn-07>.

Appendix A.  TCP Implementations for constrained devices Constrained Devices

   This section overviews the main features of TCP implementations for
   constrained devices.  The survey is limited to open source open-source stacks
   with a small footprint.  It is not meant to be all-encompassing.  For
   more powerful embedded systems (e.g., with 32-bit processors), there
   are further stacks that comprehensively implement TCP.  On the other
   hand, please be aware that this Annex is based on information
   available as of the writing.

7.1.

A.1.  uIP

   uIP is a TCP/IP stack, targetted targeted for 8 8- and 16-bit microcontrollers,
   which pioneered TCP/IP implementations for constrained devices.  uIP
   has been deployed with Contiki and the Arduino Ethernet shield.  A
   code size of ~5 kB (which comprises checksumming, IPv4, ICMP ICMP, and
   TCP) has been reported for uIP [Dunk].  Later versions of uIP
   implement IPv6 as well.

   uIP uses the same global buffer for both incoming and outgoing
   traffic, which has a size of a single packet.  In case of a
   retransmission, an application must be able to reproduce the same
   user data that had been transmitted.  Multiple connections are
   supported,
   supported but need to share the global buffer.

   The MSS is announced via the MSS option on connection establishment establishment,
   and the receive window size (of one 1 MSS) is not modified during a
   connection.  Stop-and-wait operation is used for sending data.  Among
   other optimizations, this allows to avoid for the avoidance of sliding window
   operations, which use 32-bit arithmetic extensively and are expensive
   on 8-bit CPUs.

   Contiki uses the "split hack" technique (see Section 3.2.3) to avoid
   Delayed ACKs for senders using a single segment.

   The code size of the TCP implementation in Contiki-NG has been
   measured to be of 3.2 kB on CC2538DK, cross-compiling on Linux.

7.2.

A.2.  lwIP

   lwIP is a TCP/IP stack, targetted targeted for 8- and 16-bit microcontrollers.
   lwIP has a total code size of ~14 kB to ~22 kB (which comprises
   memory management, checksumming, network interfaces, IPv4, ICMP ICMP, and
   TCP),
   TCP) and a TCP code size of ~9 kB to ~14 kB [Dunk].  Both IPv4 and
   IPv6 are supported in lwIP since v2.0.0.

   In contrast with uIP, lwIP decouples applications from the network
   stack. lwIP supports a TCP transmission window greater than a single
   segment, as well as the buffering of incoming and outcoming outgoing data.
   Other implemented mechanisms comprise slow start, congestion
   avoidance, fast retransmit retransmit, and fast recovery.  SACK and Window Scale
   support has been recently added to lwIP.

7.3.

A.3.  RIOT

   The RIOT TCP implementation (called GNRC TCP) "GNRC TCP") has been designed for
   Class 1 devices [RFC 7228]. [RFC7228].  The main target platforms are 8- and
   16-bit microcontrollers, with 32-bit platforms also supported.  GNRC
   TCP offers a similar function set as uIP, but it provides and
   maintains an independent receive buffer for each connection.  In
   contrast to uIP, retransmission is also handled by GNRC TCP.  For
   simplicity, GNRC TCP uses a single-MSS implementation.  The
   application programmer does not need to know anything about the TCP
   internals, therefore
   internals; therefore, GNRC TCP can be seen as a user-friendly uIP TCP
   implementation.

   The MSS is set on connections establishment and cannot be changed
   during connection lifetime.  GNRC TCP allows multiple connections in
   parallel, but each TCB must be allocated somewhere in the system.  By
   default
   default, there is only enough memory allocated for a single TCP
   connection, but it can be increased at compile time if the user needs
   multiple parallel connections.

   The RIOT TCP implementation offers an optional POSIX Portable Operating
   System Interface (POSIX) socket wrapper that enables POSIX
   compliance, if needed.

   Further details on RIOT and GNRC can be found in the literature
   [RIOT], [RIOT] and [GNRC].

7.4.

A.4.  TinyOS

   TinyOS was important as a platform for early constrained devices.
   TinyOS has an experimental TCP stack that uses a simple nonblocking non-blocking
   library-based implementation of TCP, which provides a subset of the
   socket interface primitives.  The application is responsible for
   buffering.  The TCP library does not do any receive-side buffering.
   Instead, it will immediately dispatch new, in-order data to the
   application and or otherwise drop the segment.  A send buffer is provided
   by the application.  Multiple TCP connections are possible.
   Recently
   Recently, there has been little further work on the stack.

7.5.

A.5.  FreeRTOS

   FreeRTOS is a real-time operating system kernel for embedded devices
   that is supported by 16- and 32-bit microprocessors.  Its TCP
   implementation is based on multiple-segment window size, although a
   'Tiny-TCP'
   "Tiny-TCP" option, which is a single-MSS variant, can be enabled.
   Delayed ACKs are supported, with a 20-ms 20 ms Delayed ACK timer as a
   technique intended 'to "to gain performance'.

7.6. performance".

A.6.  uC/OS

   uC/OS is a real-time operating system kernel for embedded devices,
   which is maintained by Micrium.  uC/OS is intended for 8-, 16- 16-, and
   32-bit microprocessors.  The uC/OS TCP implementation supports a
   multiple-segment window size.

7.7.

A.7.  Summary

                        +---+---------+--------+----+------+--------+-----+
                        |uIP|lwIP orig|lwIP 2.1|RIOT|TinyOS|FreeRTOS|uC/OS|
   +------+-------------+---+---------+--------+----+------+--------+-----+
   |Memory|Code size(kB)| <5|~9

   None of the implementations considered in this Annex support ECN or
   TFO.

   +==========+=====+======+==========+======+========+==========+=====+
   |          | uIP |lwIP  | lwIP 2.1 | RIOT | TinyOS | FreeRTOS |uC/OS|
   |          |     |orig  |          |      |        |          |     |
   +==========+=====+======+==========+======+========+==========+=====+
   | Code     |  <5 |~9 to ~14| |    38    |  <7  |  N/A   |   <9.2   | N/A |
   | Size     |     | ~14  |          |      |        |          |     |
   | (kB)     |     |      |          |      |        |          |     |
   +----------+-----+------+----------+------+--------+----------+-----+
   | Memory   | (a) |             |(a)| (T1) |   (T4)  |(T3)|   | (T3) |  N/A   |   (T2)   | N/A |
   +==========+=====+======+==========+======+========+==========+=====+
   | TCP                                                               |
   |
   +------+-------------+---+---------+--------+----+------+--------+-----+ Features                                                          |
   +==========+=====+======+==========+======+========+==========+=====+
   |  Single- | Yes | Single-Segm.|Yes|  No  |    No    | Yes| Yes  |   No   |    No    |  No |
   |      +-------------+---+---------+--------+----+------+--------+-----+    Segm. |     |      |          |      |        |          |     |
   +----------+-----+------+----------+------+--------+----------+-----+
   |     Slow start | No|  No | Yes  |   Yes    |  No  |  Yes   |    No    | Yes |
   |  T   +-------------+---+---------+--------+----+------+--------+-----+    start |     |      |          |      |        |          |     |
   +----------+-----+------+----------+------+--------+----------+-----+
   |     Fast |  No |  C   |Fast rec/retx| No| Yes  |   Yes    |  No  |  Yes   |    No    | Yes |
   |  P   +-------------+---+---------+--------+----+------+--------+-----+ rec/retx |     |      |          |      |  Keep-alive        | No|          |     |
   +----------+-----+------+----------+------+--------+----------+-----+
   |    Keep- |  No |  No  |   Yes    |  No  |   No   |   Yes    | Yes |
   |      +-------------+---+---------+--------+----+------+--------+-----+    alive |     |      |          |      |        |  f          |     |
   +----------+-----+------+----------+------+--------+----------+-----+
   |     Win. Scale | No|  No |  No  |   Yes    |  No  |   No   |   Yes    |  No |
   |  e   +-------------+---+---------+--------+----+------+--------+-----+    Scale |     |      |          |      |        |  a          |     |
   +----------+-----+------+----------+------+--------+----------+-----+
   |      TCP timest.| No| |  No |  No  |   Yes    |  No  |   No   |   Yes    |  No |
   |  t   +-------------+---+---------+--------+----+------+--------+-----+  timest. |     |      |          |  u      |        |          |     |
   +----------+-----+------+----------+------+--------+----------+-----+
   |     SACK | No|  No |  No  |   Yes    |  No  |   No   |   Yes    |  No |
   |  r   +-------------+---+---------+--------+----+------+--------+-----+
   |  e
   +----------+-----+------+----------+------+--------+----------+-----+
   |     Del. ACKs | No|  No | Yes  |   Yes    |  No  |   No   |   Yes    | Yes |
   |  s   +-------------+---+---------+--------+----+------+--------+-----+     ACKs |     |      |          |      |        |          |     |
   +----------+-----+------+----------+------+--------+----------+-----+
   |   Socket | No|  No   |Optional|(I) |Subset| |  No  | Optional | (I)  | Subset |   Yes    | Yes |
   +----------+-----+------+----------+------+--------+----------+-----+
   |  Concur. | Yes |      +-------------+---+---------+--------+----+------+--------+-----+ Yes  |      |Concur. Conn.|Yes|   Yes    | Yes  | Yes|  Yes   |   Yes    | Yes |
   +------+-------------+---+---------+--------+----+------+--------+-----+
   |    Conn. |     |      |          |      |        |          |     |
   +==========+=====+======+==========+======+========+==========+=====+
   | TLS supported supp |  No | No|  No  |   Yes    | Yes| Yes  |  Yes   |   Yes    |
   +--------------------+---+---------+--------+----+------+--------+-----+

     (T1)  = Yes |
   | orted    |     |      |          |      |        |          |     |
   +==========+=====+======+==========+======+========+==========+=====+

       Table 1: Summary of TCP Features for Different Lightweight TCP
                              Implementations

   Legend:

   (T1):   TCP-only, on x86 and AVR platforms
     (T2)  =

   (T2):   TCP-only, on ARM Cortex-M platform
     (T3)  =

   (T3):   TCP-only, on ARM Cortex-M0+ platform (NOTE: RAM usage for the
           same platform is ~2.5 kB for one TCP connection plus ~1.2 kB
           for each additional connection)
     (T4)  =

   (T4):   TCP-only, on CC2538DK, cross-compiling on Linux
     (a)   = includes

   (a):    Includes IP, ICMP ICMP, and TCP on x86 and AVR platforms.  The
           Contiki-NG TCP implementation has a code size of 3.2 kB on
           CC2538DK, cross-compiling on Linux
     (I)   = optional

   (I):    Optional POSIX socket wrapper which that enables POSIX compliance
           if needed
     Mult. =

   Mult.:  Multiple
     N/A   =

   N/A:    Not Available

      Figure 2: Summary of TCP features for different lightweight TCP
     implementations.  None of the implementations considered in this
                         Annex support ECN or TFO.

6.

Acknowledgments

   The work of Carles Gomez has been funded in part by the Spanish
   Government (Ministerio de Educacion, Cultura y Deporte) through the Jose
   Castillejo grants CAS15/00336 and and CAS18/00170, and by CAS18/00170; the European Regional
   Development Fund (ERDF) and (ERDF); the Spanish Government through projects
   TEC2016-79988-P, PID2019-106808RA-I00, AEI/FEDER, UE, and by UE; and the
   Generalitat de Catalunya Grant 2017 SGR 376.  Part of his
   contribution to this work has been carried out during his stays as a
   visiting scholar at the Computer Laboratory of the University of
   Cambridge.

   The authors appreciate the feedback received for this document.  The
   following folks provided comments that helped improve the document:
   Carsten Bormann, Zhen Cao, Wei Genyu, Ari Keranen, Abhijan
   Bhattacharyya, Andres Arcia-Moret, Yoshifumi Nishida, Joe Touch, Fred
   Baker, Nik Sultana, Kerry Lynn, Erik Nordmark, Markku Kojo, Hannes
   Tschofenig, David Black, Yoshifumi Nishida, Ilpo Jarvinen, Emmanuel Baccelli, Stuart
   Cheshire, Gorry Fairhurst, Ingemar Johansson, Ted Lemon, and Michael
   Tuexen.  Simon Brummer provided details, details and kindly performed RAM and ROM Random
   Access Memory (RAM) and Read-Only Memory (ROM) usage measurements, measurements on
   the RIOT TCP implementation.  Xavi Vilajosana provided details on the
   OpenWSN TCP implementation.  Rahul Jadhav kindly performed code size
   measurements on the Contiki-NG and lwIP 2.1.2 TCP implementations.
   He also provided details on the uIP TCP implementation.

Authors' Addresses

   Carles Gomez
   UPC
   C/Esteve Terradas, 7
   Castelldefels
   08860 Castelldefels
   Spain

   Email: carlesgo@entel.upc.edu

   Jon Crowcroft
   University of Cambridge
   JJ Thomson Avenue
   Cambridge,
   Cambridge
   CB3 0FD
   United Kingdom

   Email: jon.crowcroft@cl.cam.ac.uk

   Michael Scharf
   Hochschule Esslingen
   University of Applied Sciences
   Flandernstr. 101
   Esslingen
   73732 Esslingen am Neckar
   Germany

   Email: michael.scharf@hs-esslingen.de