Internet Research Task Force (IRTF)                             A. Clemm
Request for Comments: 9315                                     Futurewei
Category: Informational                                     L. Ciavaglia
ISSN: 2070-1721                                           Rakuten Mobile                                                    Nokia
                                                         L. Z. Granville
                         Federal University of Rio Grande do Sul (UFRGS)
                                                             J. Tantsura
                                                               Microsoft
                                                          September
                                                            October 2022

           Intent-Based Networking - Concepts and Definitions

Abstract

   Intent and Intent-Based Networking (IBN) are taking the industry by storm.
   At the same time, IBN-related terms related to Intent-Based Networking are often
   used loosely and inconsistently, in many cases overlapping and
   confused with other concepts such as "Policy." "policy."  This document
   clarifies the concept of
   "Intent" "intent" and provides an overview of the
   functionality that is associated with it.  The goal is to contribute
   towards a common and shared understanding of terms, concepts, and
   functionality that can be used as the foundation to guide further
   definition of associated research and engineering problems and their
   solutions.

   This document is a product of the IRTF Network Management Research
   Group (NMRG).  It reflects the consensus of the research group,
   having received many detailed and positive reviews by research group
   participants.  It is published for informational purposes.

Status of This Memo

   This document is not an Internet Standards Track specification; it is
   published for informational purposes.

   This document is a product of the Internet Research Task Force
   (IRTF).  The IRTF publishes the results of Internet-related research
   and development activities.  These results might not be suitable for
   deployment.  This RFC represents the consensus of the Network
   Management Research Group of the Internet Research Task Force (IRTF).
   Documents approved for publication by the IRSG are not candidates for
   any level of Internet Standard; see Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc9315.

Copyright Notice

   Copyright (c) 2022 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.

Table of Contents

   1.  Introduction
   2.  Definitions and Acronyms
   3.  Introduction of Concepts
     3.1.  Intent and Intent-Based Management
     3.2.  Related Concepts
       3.2.1.  Service Models
       3.2.2.  Policy and Policy-Based Network Management
       3.2.3.  Distinguishing between Intent, Policy, and Service
               Models
   4.  Principles
   5.  Intent-Based Networking - Functionality
     5.1.  Intent Fulfillment
       5.1.1.  Intent Ingestion and Interaction with Users
       5.1.2.  Intent Translation
       5.1.3.  Intent Orchestration
     5.2.  Intent Assurance
       5.2.1.  Monitoring
       5.2.2.  Intent Compliance Assessment
       5.2.3.  Intent Compliance Actions
       5.2.4.  Abstraction, Aggregation, Reporting
   6.  Lifecycle  Life Cycle
   7.  Additional Considerations
   8.  IANA Considerations
   9.  Security Considerations
   10. Informative References
   Acknowledgments
   Authors' Addresses

1.  Introduction

   This document is a product of the IRTF Network Management Research
   Group (NMRG).  It reflects the consensus of the RG, receiving reviews
   and explicit support from many participants.  It is published for
   informational purposes.

   In the past, interest regarding management and operations in the IETF
   has focused on individual network and device features.
   Standardization emphasis has generally been put on management
   instrumentation that needed to be provided to a networking device.  A
   prime example of this is SNMP-based management [RFC3411] and the 200+
   MIBs that have been defined by the IETF over the years.  More recent
   examples include YANG data model definitions [RFC7950] for aspects
   such as interface configuration, Access Control List (ACL)
   configuration, and Syslog configuration.

   There is a clear sense and reality that managing networks by
   configuring myriads of "nerd knobs" on a device-by-device basis is no
   longer an option in modern network environments.  Significant
   challenges arise with keeping device configurations not only
   consistent across a network but also consistent with the needs of
   services and service features they are supposed to enable.
   Additional challenges arise with regard to being able to rapidly
   adapt the network as needed and to be able to do so at scale.  At the
   same time, operations need to be streamlined and automated wherever
   possible to not only lower operational expenses but also allow for
   rapid reconfiguration of networks at sub-second time scales and to
   ensure that networks are delivering their functionality as expected.
   Among other things, this requires the ability to consume operational
   data, perform analytics, and dynamically take actions in a way that
   is aware of context as well as intended outcomes at near real-time
   speeds.

   Accordingly, the IETF has begun to address end-to-end management
   aspects that go beyond the realm of individual devices in isolation.
   Examples include the definition of YANG models for network topology
   [RFC8345] or the introduction of service models used by service
   orchestration systems and controllers [RFC8309].  Much of the
   interest has been fueled by the discussion about how to manage
   autonomic networks as discussed in the ANIMA Working Group.
   Autonomic networks are driven by the desire to lower operational
   expenses and make the management of the network as a whole more
   straightforward, putting it at odds with the need to manage the
   network one device and one feature at a time.  However, while
   autonomic networks are intended to exhibit "self-management"
   properties, they still require input from an operator or outside
   system to provide operational guidance and information about the
   goals, purposes, and service instances that the network is to serve.

   This input and operational guidance are commonly referred to as
   "intent," and networks a network that allow allows network operators to provide
   their input using intent are commonly is referred to as an "Intent-Based
   Networks" (IBNs), Network"
   (IBN), while the systems a system that help helps implement intent are
   commonly is referred to as
   an "Intent-Based Systems" (IBSs). System" (IBS).  Those systems can manifest
   themselves in a number of ways -- for example, as a controller or
   management system that is implemented as an application that runs on
   a server or set of servers, or as a set of functions that are
   distributed across a network and that collectively perform their
   intent-based functionality.

   However, intent is about more than just enabling a form of operator
   interaction with the network that involves higher-layer abstractions.
   It is also about the ability to let operators focus on what they want
   their desired outcomes to be while leaving details to the IBN
   (respectively IBS) about how those outcomes would, in fact, would be achieved to achieved.
   Focusing on the IBN (respectively IBS).
   This, in turn, outcome enables much greater operational efficiency
   and flexibility at greater scale, in shorter timescales, time scales, and with
   less dependency on human activities (and therefore less possibility
   for mistakes), and mistakes).  This also makes Intent-Based Networking an ideal candidate,
   e.g.,
   candidate for artificial intelligence techniques that can bring about
   the next level of network automation [CLEMM20].

   This vision has since caught on with the industry, leading to a
   significant number of solutions that offer Intent-Based Management
   that promise network providers to manage networks holistically at a
   higher level of abstraction and as a system that happens to consist
   of interconnected components as opposed to a set of independent
   devices (that happen to be interconnected).  Those offerings include
   IBNs and IBSs (offering a full lifecycle life cycle of intent), Software-Defined Software-
   Defined Network (SDN) controllers (offering a single point of control
   and administration for a network), and network management and
   Operations Support Systems (OSSs).

   It has been recognized for a long time that comprehensive management
   solutions cannot operate only at the level of individual devices and
   low-level configurations.  In this sense, the vision of intent is not
   entirely new.  In the past, ITU-T's model of a Telecommunications
   Management Network (TMN) introduced a set of management layers that
   defined a management hierarchy consisting of network element,
   network, service, and business management [M3010].  High-level
   operational objectives would propagate in a top-down fashion from
   upper to lower layers.  The associated abstraction hierarchy was
   crucial to decompose management complexity into separate areas of
   concern.  This abstraction hierarchy was accompanied by an
   information hierarchy that concerned itself at the lowest level with
   device-specific information, but that would, at higher layers,
   include, for example, end-to-end service instances.  Similarly, the
   concept of Policy-Based Network Management (PBNM) has, for a long
   time, touted the ability to allow users to manage networks by
   specifying high-level management policies, with policy systems
   automatically "rendering" those policies, i.e., breaking them down
   into low-level configurations and control logic.

      |  As a note, in the context of this document, "users" generally
      |  refers to operators and administrators who are responsible for
      |  the management and operation of communication services and
      |  networking infrastructures, not to "end users" of communication
      |  services.

   What has been missing, however, is putting these concepts into a more
   current context and updating them to account for current technology
   trends.  This document clarifies the concepts behind intent.  It
   differentiates intent from related concepts.  It also provides an
   overview of first-order principles of IBN Intent-Based Networking as well
   as the associated functionality.  The goal is to contribute to a
   common and shared understanding that can be used as a foundation to
   articulate research and engineering problems in the area of IBN. Intent-
   Based Networking.

   It should be noted that the articulation of IBN-related research
   problems is beyond the scope of this document.  However, it should be
   recognized that IBN Intent-Based Networking has become an important topic
   in the research community.  Per IEEE Xplore [IEEEXPLORE], as of
   December 2021, in the past decade since 2012, there have been 1138
   papers with the index term "intent", of which 411 specifically
   mention networking.  The time period since 2020 alone accounts for
   316 papers on intent and 153 for intent networking, indicating
   accelerating interest.  In addition, workshops dedicated to this
   theme are beginning to appear, such as the IEEE International
   Workshop on Intent-Based Networking [WIN21], as well as various
   special journal issues [IEEE-TITS21] [MDPI22].  A survey of current
   intent-driven networking research has been published in [PANG20],
   listing among the most pressing current research challenges aspects
   such as intent translation and understanding, intent interfaces, and
   security.

2.  Definitions and Acronyms

   ACL:  Access Control List

   API:  Application Programming Interface

   IBA:  Intent-Based Analytics.  Analytics that are defined and derived
      from users' intent and used to validate the intended state.

   IBN:  Intent-Based Network.  A network that can be managed using
      intent.

   IBS:  Intent-Based System.  A system that supports management
      functions that can be guided using intent.

   Intent:  A set of operational goals (that a network should meet) and
      outcomes (that a network is supposed to deliver) defined in a
      declarative manner without specifying how to achieve or implement
      them.

   Intent-Based Management:  The concept of performing management based
      on the concept of intent.

   PBNM:  Policy-Based Network Management

   PDP:  Policy Decision Point

   PEP:  Policy Enforcement Point

   Policy:  A set of rules that governs the choices in behavior of a
      system.

   Service Model:  A model that represents a service that is provided by
      a network to a user.

   SSoT:  Single Source of Truth.  A functional block in an IBN system
      that normalizes users' intent and serves as the single source of
      data for the lower layers.

   Statement of Intent:  A specification of one particular aspect or
      component of intent, also referred to as an intent statement.

   SVoT:  Single Version of Truth

   User:  In the context of this document, an operator and/or
      administrator responsible for the management and operation of
      communication services and networking infrastructure (as opposed
      to an end user of a communication service).

3.  Introduction of Concepts

   The following section provides an overview of the concept of intent
   and Intent-Based Management.  It also provides an overview of the
   related concepts of service models and policies (and Policy-Based
   Network Management), and explains how they relate to intent and
   Intent-Based Management.

3.1.  Intent and Intent-Based Management

   In this document, intent is defined as a set of operational goals
   (that a network is supposed to meet) and outcomes (that a network is
   supposed to deliver) defined in a declarative manner without
   specifying how to achieve or implement them.

   The term "intent" was first introduced in the context of Autonomic
   Networks, where it is defined as "an abstract, high-level policy used
   to operate the network" [RFC7575].  According to this definition, an
   intent is a specific type of policy provided by a user to provide
   guidance to the Autonomic Network that would otherwise operate
   without human intervention.  However, to avoid using intent simply as
   a synonym for policy, a distinction that differentiates intent
   clearly from other types of policies needs to be introduced.

      |  One note regarding the use of the plural form of "intent": in
      |  the English language, the term "intent" is generally used only
      |  in singular form.  However, the specification of intent as a
      |  whole usually involves the specification of several individual
      |  statements of intent, or intent statements.  In some cases,
      |  intent statements are colloquially also referred to as
      |  "intents", although in general, the use of the term "intents"
      |  is discouraged.

   Intent-Based Management aims to lead towards networks that are
   fundamentally simpler to manage and operate, requiring only minimal
   outside intervention.  Networks, even when they are autonomic, are
   not clairvoyant and have no way of automatically knowing particular
   operational goals nor which instances of networking services to
   support.  In other words, they do not know what the intent of the
   network provider is that gives the network the purpose of its being.
   This still needs to be communicated to the network by what informally
   constitutes intent.  That being said, the concept of intent is not
   limited just to autonomic networks, such as networks that feature an
   Autonomic Control Plane [RFC8994], but applies to any network.

   Intent defines goals and outcomes in a manner that is purely
   declarative, specifying what to accomplish, not how to achieve it.
   Intent thus applies several important concepts simultaneously:

   *  It provides data abstraction: Users do not need to be concerned
      with low-level device configuration and nerd knobs.

   *  It provides functional abstraction from particular management and
      control logic: Users do not need to be concerned even with how to
      achieve a given intent.  What is specified is the desired outcome
      with the IBS automatically figuring out a course of action (e.g.,
      using an algorithm or applying a set of rules derived from the
      intent) for how to achieve the outcome.

   The following are some examples of intent, expressed in natural
   language for the sake of clarity (actual interfaces used to convey
   intent may differ):

   *  "Steer networking traffic originating from endpoints in one
      geography away from a second geography, unless the destination
      lies in that second geography." (states what to achieve, not how.)

   *  "Avoid routing networking traffic originating from a given set of
      endpoints (or associated with a given customer) through a
      particular vendor's equipment, even if this occurs at the expense
      of reduced service levels." (states what to achieve, not how,
      providing additional guidance for how to trade off between
      different goals when necessary.)

   *  "Maximize network utilization even if it means trading off service
      levels (such as latency, loss) unless service levels have
      deteriorated 20% or more from their historical mean." (a desired
      outcome, with a set of constraints for additional guidance, that
      does not specify how to achieve this.)

   *  "Ensure VPN services have path protection at all times for all
      paths." (a desired outcome that of which it may not be clear as to how it can
      be precisely accommodated.)

   *  "Generate in situ Operations, Administration, and Maintenance
      (OAM) data and network telemetry for later offline analysis
      whenever significant fluctuations in latency across a path are
      observed." (goes beyond traditional event-condition-action by not being
      specific about what constitutes "significant" and what specific
      data to collect.)

   *  "Route traffic in a Space Information Network in a way that
      minimizes dependency on stratospheric balloons unless the intended
      destination is an aircraft." (does not specify how to precisely
      achieve this; extrapolates on scenarios mentioned in [PANG20].)

   *  "For a smart city service, ensure traffic signal control traffic
      uses dedicated and redundant slices that avoid fate sharing." (a
      desired outcome with a set of constraints and additional guidance
      without specifying how to precisely achieve this; extrapolates on
      scenarios from [GHARBAOUI21].)

   In contrast, the following are examples of what would not constitute
   intent (again, expressed in natural language for the sake of
   clarity):

   *  "Configure a given interface with an IP address."  (This would be
      considered device configuration and fiddling with configuration
      knobs, not intent.)

   *  "When interface utilization exceeds a specific threshold, emit an
      alert."  (This would be a rule that can help support network
      automation, but a simple rule is not an intent.)

   *  "Configure a VPN with a tunnel from A to B over path P."  (This
      would be considered as a configuration of a service.)

   *  "Deny traffic to prefix P1 unless it is traffic from prefix P2."
      (This would be an example of an access policy or a firewall rule,
      not intent.)

   In networks, in particular in networks that are deemed autonomic,
   intent should ideally be rendered by the network itself, i.e.,
   translated into device-specific rules and courses of action.
   Ideally, intent would not need to be orchestrated or broken down by a
   higher-level, centralized system but by the network devices
   themselves using a combination of distributed algorithms and local
   device abstractions.  In this idealized vision, because intent holds
   for the network as a whole, intent should ideally be automatically
   disseminated across all devices in the network, which can themselves
   decide whether they need to act on it.

   However, such decentralization will not be practical in all cases.
   Certain functions will need to be at least conceptually centralized.
   For example, users may require a single conceptual point of
   interaction with the network.  The system providing this point acts
   as the operational front end for the network through which users can
   direct requests at the network and from which they can receive
   updates about the network.  It may appear to users as a single
   system, even if it is implemented in a distributed manner.  In turn,
   it interacts with and manages other systems in the network as needed
   in order to realize (i.e., to fulfill and to assure) the desired
   intent.  Likewise, the vast majority of network devices may be
   intent-agnostic and focus only (for example) on the actual forwarding
   of packets.  Many devices may also be constrained in terms of their
   processing resources.  This means that not every device may be able
   to act on intent on its own.  Again, intent in those cases can be
   achieved by a separate system that performs the required actions.

   Another reason to provide intent functionality from a conceptually
   centralized point is in cases where the realization of a certain type
   of intent benefits from global knowledge of a network and its state.
   In many cases, such a global view may be impractical to maintain by
   individual devices, for example due to the volume of data and time
   lags that are involved.  It may even be impractical for devices to
   simply access such a view from another remote system if such were
   available.

   All of this implies that in many cases, certain intent functionality
   needs to be provided by functions that are specialized for that
   purpose and that may be provided by dedicated systems (which in some
   cases could also co-host other networking functions).  For example,
   the translation of specific types of intent into corresponding
   courses of action and algorithms to achieve the desired outcomes may
   need to be provided by such specialized functions.  Of course, to
   avoid single points of failure, the implementation and hosting of
   such functions may still be distributed even if conceptually
   centralized.

   Regardless of its particular implementation in a centralized or
   decentralized manner, an IBN is a network that can be managed using
   intent.  This means that it is able to recognize and ingest intent of
   an operator or user and configure and adapt itself according to the
   user intent, achieving an intended outcome (i.e., a desired state or
   behavior) without requiring the user to specify the detailed
   technical steps for how to achieve the outcome.  Instead, the IBN
   will be able to figure out on its own how to achieve the outcome.
   Similarly, an IBS is a system that allows users to manage a network
   using intent.  Such a system will serve as a point of interaction
   with users and implement the functionality that is necessary to
   achieve the intended outcomes, interacting for that purpose with the
   network as required.

   Other definitions of intent exist, such as [TR523].  Intent there is
   simply defined as a declarative interface that is typically provided
   by a controller.  It implies the presence of a centralized function
   that renders the intent into lower-level policies or instructions and
   orchestrates them across the network.  While this is certainly one
   way of implementation, the definition that is presented here is more
   encompassing and ambitious, as it emphasizes the importance of
   managing the network by specifying desired outcomes without the
   specific steps to be taken in order to achieve the outcome.  A
   controller API that simply provides a network-level of abstraction at the network level
   is more limited and would not necessarily qualify as intent.
   Likewise, ingestion and recognition of intent may not necessarily
   occur via a
   traditional an API based on function invocations and simple request-
   response interactions but may involve other types of human-machine
   interactions.
   interactions such as dialogs to provide clarifications and
   refinements to requests.

3.2.  Related Concepts

3.2.1.  Service Models

   A service model is a model that represents a service that is provided
   by a network to a user.  Per [RFC8309], a service model describes a
   service and its parameters in a portable and implementation-agnostic
   way that can be used independently of the equipment and operating
   environment on which the service is realized.  Two subcategories are
   distinguished: a "Customer Service Model" describes an instance of a
   service as provided to a customer, possibly associated with a service
   order, and a "Service Delivery Model" describes how a service is
   instantiated over existing networking infrastructure.

   An example of a service could be a Layer 3 VPN service [RFC8299], a
   Network Slice [NETWORK-SLICE], or residential Internet access.
   Service models represent service instances as entities in their own
   right.  Services have their own parameters, actions, and lifecycles. life cycles.
   Typically, service instances can be bound to end users of
   communication services who might be billed for the services provided.

   Instantiating a service typically involves multiple aspects:

   *  A user (or northbound system) needs to define and/or request a
      service to be instantiated.

   *  Resources, such as IP addresses, AS numbers, VLAN or VxLAN pools,
      interfaces, bandwidth, or memory need to be allocated.

   *  How to map services to the resources needs to be defined.
      Multiple mappings are often possible, which to select may depend
      on context (such as which type of access is available to connect
      the end user of a communication service with the service).

   *  Bindings between upper- and lower-level objects need to be
      maintained.

   *  Once instantiated, the service operational state needs to be
      validated and assured to ensure that the network indeed delivers
      the service as requested.

   The realization of service models involves a system, such as a
   controller, that provides provisioning logic.  This includes breaking
   down high-level service abstractions into lower-level device
   abstractions, identifying and allocating system resources, and
   orchestrating individual provisioning steps.  Orchestration
   operations are generally conducted using a "push" model in which the
   controller/manager initiates the operations as required, then pushes
   down the specific configurations to the device and validates whether
   the new changes have been accepted and the new operational/derived
   states are achieved and in sync with the intent/desired state.  In
   addition to instantiating and creating new instances of a service,
   updating, modifying, and decommissioning services also need to be
   supported.  The device itself typically remains agnostic to the
   service or the fact that its resources or configurations are part of
   a service/concept at a higher layer.

   Instantiated service models map to instantiated lower-layer network
   and device models.  Examples include instances of paths or instances
   of specific port configurations.  The service model typically also
   models dependencies and layering of services over lower-layer
   networking resources that are used to provide services.  This
   facilitates management by allowing to follow dependencies for
   troubleshooting activities, activities and to perform impact analysis in which
   events in the network are assessed regarding their impact on services
   and customers.  Services are typically orchestrated and provisioned
   top to bottom, which also facilitates keeping track of the assignment
   of network resources (composition), while troubleshooted bottom up
   (decomposition).  Service models might also be associated with other
   data that does not concern the network but provides business context.
   This includes things such as customer data (such as billing
   information), service orders and service catalogs, tariffs, service
   contracts, and Service Level Agreements (SLAs), including contractual
   agreements regarding remediation actions.

   [SERVICE-MAPPING-YANG] is an example of a data model that provides a
   mapping for customer service models (e.g., the L3VPN Service Model)
   to Traffic Engineering (TE) models (e.g., the TE Tunnel or the
   Abstraction and Control of Traffic Engineered Networks Virtual
   Network model).

   Like intent, service models provide higher layers of abstraction.
   Service models are often also complemented with mappings that capture
   dependencies between service and device or network configurations.
   Unlike intent, service models do not allow to define a desired
   "outcome" that would be automatically maintained by an IBS.  Instead,
   the management of service models requires the development of
   sophisticated algorithms and control logic by network providers or
   system integrators.

3.2.2.  Policy and Policy-Based Network Management

   Policy-Based Network Management (PBNM) is a management paradigm that
   separates the rules that govern the behavior of a system from the
   functionality of the system.  It promises to reduce maintenance costs
   of information and communication systems while improving flexibility
   and runtime adaptability.  It is present today at the heart of a
   multitude of management architectures and paradigms, including SLA-
   driven, business-driven, autonomous, adaptive, and self-* management
   [BOUTABA07].  The interested reader is asked to refer to the rich set
   of existing literature, which includes this and many other
   references.  In the following, we will only provide a much-abridged
   and distilled overview.

   At the heart of policy-based management is the concept of a policy.
   Multiple definitions of policy exist: "Policies are rules governing
   the choices in the behavior of a system" [SLOMAN94].  "Policy is a
   set of rules that are used to manage and control the changing and/or
   maintaining of the state of one or more managed objects"
   [STRASSNER03].  Common to most definitions is the definition of a
   policy as a "rule."  Typically, the definition of a rule consists of
   an event (whose occurrence triggers a rule), a set of conditions
   (which get assessed and which must be true before any actions are
   actually "fired"), and finally, a set of one or more actions that are
   carried out when the condition holds.

   Policy-based management can be considered an imperative management
   paradigm: Policies precisely specify what needs to be done when and
   in which circumstance.  By using policies, management can, in effect,
   be defined as a set of simple control loops.  This makes policy-based
   management a suitable technology to implement autonomic behavior that
   can exhibit self-* management properties, including self-
   configuration, self-healing, self-optimization, and self-protection.
   This is notwithstanding the fact that policy-based management may
   make use of the concept of abstractions (such as, "Bob gets gold
   service") that hide from the user the specifics of how that
   abstraction is rendered in a particular deployment.

   Policies typically involve a certain degree of abstraction in order
   to cope with the heterogeneity of networking devices.  Rather than
   having a device-specific policy that defines events, conditions, and
   actions in terms of device-specific commands, parameters, and data
   models, a policy is defined at a higher level of abstraction
   involving a canonical model of systems and devices to which the
   policy is to be applied.  A policy agent on a controller or the
   device subsequently "renders" the policy, i.e., translates the
   canonical model into a device-specific representation.  This concept
   allows applying the same policy across a wide range of devices
   without needing to define multiple variants.  In other words, policy
   definition is decoupled from policy instantiation and policy
   enforcement.  This enables operational scale and allows network
   operators and authors of policies to think in higher terms of
   abstraction than device specifics and be able to reuse the same,
   high-level definition across different networking domains, WAN, data
   center (DC), or public cloud.

   PBNM is typically "push-based": Policies are pushed onto devices
   where they are rendered and enforced.  The push operations are
   conducted by a manager or controller that is responsible for
   deploying policies across the network and monitoring their proper
   operation.  That being said, other policy architectures are possible.
   For example, policy-based management can also include a pull
   component in which the decision regarding which action to take is
   delegated to a so-called Policy Decision Point (PDP).  This PDP can
   reside outside the managed device itself and has typically global
   visibility and context with which to make policy decisions.  Whenever
   a network device observes an event that is associated with a policy
   but lacks the full definition of the policy or the ability to reach a
   conclusion regarding the expected action, it reaches out to the PDP
   for a decision (reached, for example, by deciding on an action based
   on various conditions).  Subsequently, the device carries out the
   decision as returned by the PDP; the device "enforces" the policy and
   hence acts as a PEP (Policy Enforcement Point).  Either way, PBNM
   architectures typically involve a central component from which
   policies are deployed across the network and/or policy decisions
   served.

   Like Intent, intent, policies provide a higher layer of abstraction.  Policy
   systems are also able to capture dynamic aspects of the system under
   management through the specification of rules that allow defining
   various triggers for specific courses of action.  Unlike intent, the
   definition of those rules (and courses of action) still needs to be
   articulated by users.  Since the intent is unknown, conflict
   resolution within or between policies requires interactions with a
   user or some kind of logic that resides outside of PBNM.  In that
   sense, policy constitutes a lower level of abstraction than intent,
   and it is conceivable for Intent-Based Systems IBSs to generate policies that are
   subsequently deployed by a PBNM system, allowing PBNM to support
   Intent-Based Networking.

3.2.3.  Distinguishing between Intent, Policy, and Service Models

   What Intent, Policy, intent, policy, and Service Models service models all have in common is the
   fact that they involve a higher layer of abstraction of a network
   that does not involve device specifics, generally transcends
   individual devices, and makes the network easier to manage for
   applications and human users compared to having to manage the network
   one device at a time.  Beyond that, differences emerge.

   Summarized differences:

   *  A service model is a data model that is used to describe instances
      of services that are provided to customers.  A service model has
      dependencies on lower-level models (device and network models)
      when describing how the service is mapped onto the underlying
      network and IT infrastructure.  Instantiating a service model
      requires orchestration by a system; the logic for how to
      orchestrate/manage/provide the service model and how to map it
      onto underlying resources is not included as part of the model
      itself.

   *  Policy is a set of rules, typically modeled around a variation of
      events/conditions/actions, used to express simple control loops
      that can be rendered by devices without requiring intervention by
      the outside system.  Policies let users define what to do under
      what circumstances, but they do not specify the desired outcome.

   *  Intent is a high-level, declarative goal that operates at the
      level of a network and services it provides, not individual
      devices.  It is used to define outcomes and high-level operational
      goals, without specifying how those outcomes should be achieved or
      how goals should specifically be satisfied, and without the need
      to enumerate specific events, conditions, and actions.  Which
      algorithm or rules to apply can be automatically "learned/derived
      from intent" by the IBS.  In the context of autonomic networking,
      intent is ideally rendered by the network itself; also, the
      dissemination of intent across the network and any required
      coordination between nodes is resolved by the network without the
      need for external systems.

   One analogy to capture the difference between policy policy-based systems
   and Intent-Based
   Systems IBSs is that of Expert Systems and Learning Systems in the field
   of Artificial Intelligence.  Expert Systems operate on knowledge
   bases with rules that are supplied by users, analogous to policy
   systems whose policies are supplied by users.  They are able to make
   automatic inferences based on those rules but are not able to "learn"
   new rules on their own.  Learning Systems (popularized by deep
   learning and neural networks), on the other hand, are able to learn
   without depending on user programming or articulation of rules.
   However, they do require a learning or training phase requiring large
   data sets; explanations of actions that the system actually takes
   provide a different set of challenges.  Analogous to intent-based
   systems, IBSs, users
   focus on what they would like the learning system to accomplish but
   not how to do it.

4.  Principles

   The following main operating principles allow characterizing the
   intent-based/-driven/-defined nature of a system.

   1.  Single Source of Truth (SSoT) and Single Version/View Version of Truth (SVoT).
       The SSoT is an essential component of an intent-based
       system IBS as it enables
       several important operations.  The set of validated intent
       expressions is the system's SSoT.  SSoT and the records of the
       operational states enable comparing the intended/
       desired intended/desired state
       and actual/operational states of the system and determining drift
       between them.  SSoT and the drift information provide the basis
       for corrective actions.  If the IBS is equipped with the means to
       predict states, it can further develop strategies to anticipate,
       plan, and pro-actively act on any diverging trends with the aim
       to minimize their impact.  Beyond providing a means for
       consistent system operation, SSoT also allows for better
       traceability to validate if/how the initial intent and associated
       business goals have been properly met in order to evaluate the
       impacts of changes in the intent parameters and impacts and
       effects of the events occurring in the system.

       Single Version (or View) of Truth derives from the SSoT and can
       be used to perform other operations such as querying, polling, or
       filtering measured and correlated information in order to create
       so-called "views."  These views can serve the users of the
       intent-based system. IBS.
       In order to create intents intent statements as single sources of truth,
       the IBS must follow well-specified and well-
       documented well-documented processes
       and models.  In other contexts, SSoT is also referred to as the
       invariance of the intent [LENROW15].

   2.  One touch but not one shot.  In an ideal intent-based system, IBS, the user expresses
       intent in one form or another, and then the system takes over all
       subsequent operations (one touch).  A zero-touch approach could
       also be imagined in the case where the intent-
       based system IBS has the capabilities
       or means to recognize intentions in any form of data.  However,
       the zero- or one-touch approach should not distract from the fact
       that reaching the state of a well-formed and valid intent
       expression is not a one-
       shot one-shot process.  On the contrary, the
       interfacing between the user and the intent-based system IBS could be designed as an
       interactive and iterative process.  Depending on the level of
       abstraction, the intent expressions may initially contain more or
       less implicit parts and imprecise or unknown parameters and
       constraints.  The role of the intent-based system IBS is to parse, understand, and
       refine the intent expression to reach a well-
       formed well-formed and valid
       intent expression that can be further used by the system for the
       fulfillment and assurance operations.  An intent refinement
       process could use a combination of iterative steps involving the
       user to validate the proposed refined intent and to ask the user
       for clarifications in case some parameters or variables could not
       be deduced or learned by means of the system itself.  In
       addition, the Intent-Based System IBS will need to moderate between conflicting
       intent, helping users to properly choose between intent
       alternatives that may have different ramifications.

   3.  Autonomy and Supervision.  A desirable goal for an intent-based
       system IBS is to
       offer a high degree of flexibility and freedom on both the user
       side and system side, e.g., by giving the user the ability to
       express intents intent using the user's own terms, by supporting
       different forms of expression for individual statements of intents intent
       and being capable of refining the intent expressions to well-formed well-
       formed and exploitable expressions.  The dual principle of
       autonomy and supervision allows operating a system that will have
       the necessary levels of autonomy to conduct its tasks and
       operations without requiring the intervention of the user and
       taking its own decisions (within its areas of concern and span of
       control) as how to perform and meet the user expectations in
       terms of performance and quality, while at the same time
       providing the proper level of supervision to satisfy the user
       requirements for reporting and escalation of relevant
       information.

   4.  Learning.  An intent-based system IBS is a learning system.  In contrast to an
       imperative type of system, such as Event-
       Condition-Action Event-Condition-Action policy
       rules, where the user defines beforehand the expected behavior of
       the system to various events and conditions, in an intent-based system, IBS, the user
       only declares what the system is supposed to achieve and not how
       to achieve these goals.  There is thus a transfer of reasoning/rationality reasoning/
       rationality from the human (domain knowledge) to the system.
       This transfer of cognitive capability also implies the
       availability in the
       intent-based system IBS of capabilities or means for learning,
       reasoning, and knowledge representation and management.  The
       learning abilities of an IBS can apply to different tasks such as
       optimization of the intent rendering or intent refinement
       processes.  The fact that an intent-based system IBS is a continuously evolving
       system creates the condition for continuous learning and
       optimization.  Other cognitive capabilities such as planning can
       also be leveraged in an intent-based system IBS to anticipate or forecast future
       system state and response to changes in intents intent or network
       conditions and thus elaboration of plans to accommodate the
       changes while preserving system stability and efficiency in a
       trade-off with cost and robustness of operations.

   5.  Capability exposure.  Capability exposure consists in the need
       for expressive network capabilities, requirements, and
       constraints to be able to compose/decompose intents intent and map the
       user's expectations to the system capabilities.

   6.  Abstract and outcome-driven.  Users do not need to be concerned
       with how intent is achieved and are empowered to think in terms
       of outcomes.  In addition, they can refer to concepts at a higher
       level of abstractions, independent, e.g., of vendor-specific
       renderings.

   The described principles are perhaps the most prominent, but they are
   not an exhaustive list.  There are additional aspects to consider,
   such as:

   *  Intent targets are not individual devices but typically
      aggregations (such as groups of devices adhering to a common
      criteria, such as devices of a particular role) or abstractions
      (such as service types, service instances, or topologies).

   *  Abstraction and inherent virtualization: agnostic to
      implementation details.

   *  Human-tailored network interaction: IBN should speak the language
      of the user as opposed to requiring the user to speak the language
      of the device/network.

   *  Explainability as an important IBN function, detection and IBN-
      aided resolution of conflicting intent, and reconciliation of what
      the user wants and what the network can actually do.

   *  Inherent support, verification, and assurance of trust.

   All of these principles and considerations have implications on the
   design of intent-based systems IBSs and their supporting architecture.  Accordingly, they
   need to be considered when deriving functional and operational
   requirements.

5.  Intent-Based Networking - Functionality

   Intent-Based Networking involves a wide variety of functions that can
   be roughly divided into two categories:

   *  Intent Fulfillment provides functions and interfaces that allow
      users to communicate intent to the network and that perform the
      necessary actions to ensure that intent is achieved.  This
      includes algorithms to determine proper courses of action and
      functions that learn to optimize outcomes over time.  In addition,
      it also includes more traditional functions such as any required orchestration of
      coordinated configuration operations across the network and
      rendering of higher-level abstractions into lower-
      level lower-level parameters
      and control knobs.

   *  Intent Assurance provides functions and interfaces that allow
      users to validate and monitor that the network is indeed adhering
      to and complying with intent.  This is necessary to assess the
      effectiveness of actions taken as part of fulfillment, providing
      important feedback that allows those functions to be trained or
      tuned over time to optimize outcomes.  In addition, Intent
      Assurance is necessary to address "intent drift."  Intent is not
      meant to be transactional, i.e., "set and forget", but is expected
      to remain in effect over time (unless explicitly stated
      otherwise).  Intent drift occurs when a system originally meets
      the intent, but over time gradually allows its behavior to change
      or be affected until it no longer does or does so in a less
      effective manner.

   The following sections provide a more comprehensive overview of those
   functions.

5.1.  Intent Fulfillment

   Intent fulfillment is concerned with the functions that take intent
   from its origination by a user (generally, an administrator of the
   responsible organization) to its realization in the network.

5.1.1.  Intent Ingestion and Interaction with Users

   The first set of functions is concerned with "ingesting" intent,
   i.e., obtaining intent through interactions with users.  They provide
   functions that recognize intent from interaction with the user as
   well as functions that allow users to refine their intent and
   articulate it in such ways so that it becomes actionable by an
   Intent-Based System. IBS.
   Typically, those functions go beyond those provided by a traditional non-intent-
   based API, although non-intent-based APIs may also still be provided
   (and needed for interactions beyond human users, i.e., with other
   machines).  Many cases would also involve a set of intuitive and
   easy-to-navigate workflows that guide users through the intent
   ingestion phase, making sure that all inputs that are necessary for
   intent modeling and consecutive translation have been gathered.  They
   may support unconventional human-machine interactions, in which a
   human will not simply give simple commands but which may involve instead a human-machine
   dialog is used to provide clarifications, to explain ramifications
   and trade-offs, and to facilitate refinements.

   The goal is ultimately to make IBSs as easy and natural to use and
   interact with as possible, in particular allowing human users to
   interact with the IBS in ways that do not involve a steep learning
   curve that forces the user to learn the "language" of the system.
   Ideally, it will be the Intent-Based Systems IBSs that are increasingly able to learn how
   to understand the user, as opposed to the other way around.  Of
   course, further research will be required to make this a reality.

5.1.2.  Intent Translation

   A second set of functions needs to translate user intent into courses
   of action and requests to take against the network, which will be
   meaningful to network configuration and provisioning systems.  These
   functions lie at the core of IBS, bridging the gap between
   interaction with users on the one hand and the traditional management and
   operations side that will need to orchestrate provisioning and
   configuration across the network.

   Beyond merely breaking down a higher layer of abstraction (intent)
   into a lower layer of abstraction (policies and device
   configuration), Intent Translation functions can be complemented with
   functions and algorithms that perform optimizations and that are able
   to learn and improve over time in order to result in the best
   outcomes, specifically in cases where multiple ways of achieving
   those outcomes are conceivable.  For example, satisfying an intent
   may involve computation of paths and other parameters that will need
   to be configured across the network.  Heuristics and algorithms to do
   so may evolve over time to optimize outcomes that may depend on a
   myriad of dynamic network conditions and context.

5.1.3.  Intent Orchestration

   A third set of functions deals with the actual configuration and
   provisioning steps that need to be orchestrated across the network
   and that were determined by the previous intent translation step.

5.2.  Intent Assurance

   Intent assurance Assurance is concerned with the functions that are necessary
   to ensure that the network indeed complies with the desired intent
   once it has been fulfilled.

5.2.1.  Monitoring

   A first set of assurance functions monitors and observes the network
   and its exhibited behavior.  This includes all the usual assurance
   functions such as monitoring the network for events and performance
   outliers, performing measurements to assess service levels that are
   being delivered, and generating and collecting telemetry data.
   Monitoring and observation are required as the basis for the next set
   of functions that assess whether the observed behavior is in fact in
   compliance with the behavior that is expected based on the intent.

5.2.2.  Intent Compliance Assessment

   At the core of Intent Assurance are functions that compare the actual
   network behavior that is being monitored and observed with the
   intended behavior that is expected per the intent and is held by
   SSoT.  These functions continuously assess and validate whether the
   observation indicates compliance with intent.  This includes
   assessing the effectiveness of intent fulfillment actions, including
   verifying that the actions had the desired effect and assessing the
   magnitude of the effect as applicable.  It can also include functions
   that perform analysis and aggregation of raw observation data.  The
   results of the assessment can be fed back to facilitate learning
   functions that optimize outcomes.

   Intent compliance assessment also includes assessing whether intent
   drift occurs over time.  Intent drift can be caused by a control
   plane or lower-level management operations that inadvertently cause
   behavior changes that conflict with intent that was orchestrated
   earlier.  Intent-Based Systems  IBSs and Networks need to be able to detect when such drift
   occurs or is about to occur as well as assess the severity of the
   drift.

5.2.3.  Intent Compliance Actions

   When intent drift occurs or network behavior is inconsistent with
   desired intent, functions that are able to trigger corrective actions
   are needed.  This includes actions needed to resolve intent drift and
   bring the network back into compliance.  Alternatively, and where
   necessary, reporting functions need to be triggered that alert
   operators and provide them with the necessary information and tools
   to react appropriately, e.g., by helping them articulate
   modifications to the original intent to moderate between conflicting
   concerns.

5.2.4.  Abstraction, Aggregation, Reporting

   The outcome of Intent Assurance needs to be reported back to the user
   in ways that allow the user to relate the outcomes to their intent.
   This requires a set of functions that are able to analyze, aggregate,
   and abstract the results of the observations accordingly.  In many
   cases, lower-level concepts such as detailed performance statistics
   and observations related to low-level settings need to be "up-
   leveled" to concepts the user can relate to and take action on.

   The required aggregation and analysis functionality needs to be
   complemented with functions that report intent compliance status and
   provide adequate summarization and visualization to human users.

6.  Lifecycle  Life Cycle

   Intent is subject to a lifecycle: life cycle: it comes into being, may undergo
   changes over the course of time, and may at some point be retracted.
   This lifecycle life cycle is closely tied to various interconnection functions
   that are associated with the intent concept.

   Figure 1 depicts an intent lifecycle life cycle and its main functions.  The
   functions were introduced in Section 5 and are divided into two
   functional (horizontal) planes reflecting the distinction between
   fulfillment and assurance.  In addition, they are divided into three
   (vertical) spaces.

   The spaces indicate the different perspectives and interactions with
   different roles that are involved in addressing the functions:

   *  The User Space involves the functions that interface the network
      and intent-based system IBS with the human user.  It involves the functions that allow
      users to articulate and the intent-based
      system IBS to recognize that intent.  It also
      involves the functions that report back the status of the network
      relative to the intent and that allow users to assess outcomes and
      whether their intent has the desired effect.

   *  The Translation, or Intent-Based System (IBS) Space involves the
      functions that bridge the gap between intent users and the network
      operations infrastructure.  This includes the functions used to
      translate an intent into a course of action as well as the
      algorithms that are used to plan and optimize those courses of
      action also in consideration of feedback and observations from the
      network.  It also includes the functions to analyze and aggregate
      observations from the network in order to validate compliance with
      the intent and to take corrective actions as necessary.  In
      addition, it includes functions that abstract observations from
      the network in ways that relate them to the intent as communicated
      by users.  This facilitates the reporting functions in the user
      space.

   *  The Network Operations Space, finally, involves the traditional orchestration,
      configuration, monitoring, and measurement functions, which are
      used to effectuate the rendered intent and observe its effects on
      the network.

            User Space   :       Translation / IBS       :  Network Ops
                         :            Space              :     Space
                         :                               :
           +----------+  :  +----------+   +-----------+ : +-----------+
   Fulfill |recognize/|---> |translate/|-->|  learn/   |-->| configure/|
           |generate  |     |          |   |  plan/    |   | provision |
           |intent    |<--- |  refine  |   |  render   | : |           |
           +----^-----+  :  +----------+   +-----^-----+ : +-----------+
                |        :                       |       :        |
   .............|................................|................|.....
                |        :                  +----+---+   :        v
                |        :                  |validate|   :  +----------+
                |        :                  +----^---+ <----| monitor/ |
   Assure   +---+---+    :  +---------+    +-----+---+   :  | observe/ |
            |report | <---- |abstract |<---| analyze | <----|          |
            +-------+    :  +---------+    |aggregate|   :  +----------+
                         :                 +---------+   :

                        Figure 1: Intent Lifecycle Life Cycle

   When carefully inspecting the diagram, it becomes apparent that the
   intent lifecycle, life cycle, in fact, involves two cycles, or loops:

   *  The "inner" intent control loop between IBS and Network Operations
      space is completely autonomic and does not involve any human in
      the loop.  It represents closed-loop automation that involves
      automatic analysis and validation of intent based on observations
      from the network operations space.  Those observations are fed
      into the function that plans the rendering of networking intent in
      order to make adjustments as needed in the configuration of the
      network.  The loop addresses and counteracts any intent drift that
      may be occurring, using observations to assess the degree of the
      network's intent compliance and automatically prompting actions to
      address any discrepancies.  Likewise, the loop allows to assess
      the effectiveness of any actions that are taken in order to
      continuously learn and improve how intent needs to be rendered in
      order to achieve the desired outcomes.

   *  The "outer" intent control loop extends to the user space.  It
      includes the user taking action and adjusting their intent based
      on observations and feedback from the IBS.  Intent is thus
      subjected to a lifecycle: life cycle: It comes into being, may undergo
      refinements, modifications, and changes of time, and may at some
      point in time even get retracted.

7.  Additional Considerations

   Given the popularity of the term "intent," it is tempting to broaden
   its use to encompass also other related concepts, resulting in
   "intent-washing" "intent-
   washing" that paints those concepts in a new light by simply applying
   new intent terminology to them.  A common example concerns referring
   to the northbound interface of SDN controllers as "intent interface."
   However, in some cases, this actually makes sense not just as a
   marketing ploy but as a way to better relate previously existing and
   new concepts.

   In that sense and with regards to intent, it makes sense to
   distinguish various subcategories of intent as follows:

   *

   Operational Intent:  defines intent related to operational goals of
      an operator; it corresponds to the original "intent" term and the
      concepts defined in this document.

   *

   Rule Intent:  a synonym for policy rules regarding what to do when
      certain events occur.

   *

   Service Intent:  a synonym for customer service model [RFC8309].

   *

   Flow Intent:  a synonym for a Service Level Objective for a given
      flow.

   A comprehensive set of classifications of different concepts and
   categories of intent will be described in a separate document.

8.  IANA Considerations

   This document has no actions for IANA. IANA actions.

9.  Security Considerations

   This document describes concepts and definitions of Intent-Based
   Networking.  As such, the below security considerations remain high
   level, i.e., in the form of principles, guidelines, or requirements.
   More detailed security considerations will be described in the
   documents that specify the architecture and functionality.

   Security in Intent-Based Networking can apply to different facets:

   *  Securing the intent-based system IBS itself.

   *  Mitigating the effects of erroneous, harmful, or compromised
      intents.
      intent statements.

   *  Expressing security policies or security-related parameters with
      intents.
      intent statements.

   Securing the intent-based system IBS aims at making the intent-based
   system IBS operationally secure by
   implementing security mechanisms and applying security best
   practices.  In the context of Intent-Based Networking, such
   mechanisms and practices may consist of intent verification and
   validation, operations on intents intent by authenticated and authorized
   users only, and protection against or detection of tampered intents.
   statements of intent.  Such mechanisms may also include the
   introduction of multiple levels of intent.  For example, intent
   related to securing the network should occur at a "deeper" level that
   overrides other levels of intent if necessary, and that is not
   subject to modification through regular operations but through ones
   that are specifically secured.  Use of additional mechanisms such as
   explanation components that describe the security ramifications and
   trade-offs should be considered as well.

   Mitigating the effects of erroneous or compromised intents statements of
   intent aims at making the intent-based system IBS operationally safe by providing
   checkpoint and safeguard mechanisms and operating principles.  In the
   context of Intent-Based Networking, such mechanisms and principles
   may consist of the ability to automatically detect unintended,
   detrimental, or abnormal behavior; the ability to automatically (and
   gracefully) roll back or fall back to a previous "safe" state; the
   ability to prevent or contain error amplification (due to the
   combination of a higher degree of automation and the intrinsic higher
   degree of freedom, ambiguity, and implicitly implicit information conveyed by intents);
   intent statements); and dynamic levels of supervision and reporting
   to make the user aware of the right information at the right time
   with the right level of context.  Erroneous or harmful intents intent
   statements may inadvertently propagate and compromise security.  In
   addition, compromised intents intent statements (for example, intent forged by an
   inside attacker) may sabotage or harm the network resources and make
   them vulnerable to further, larger attacks, e.g., by defeating
   certain security mechanisms.

   Expressing security policies or security-related parameters with
   intents as intent
   consists of using the intent formalism (a high-level, declarative
   abstraction) or part(s) of an intent statement to define
   security-related security-
   related aspects such as as:

   *  data governance, governance;

   *  level(s) of confidentiality in data exchange, exchange;

   *  level(s) of availability of system resources, of protection in
      forwarding paths, and of isolation in processing functions, functions;

   *  level(s) of encryption, encryption; and

   *  authorized entities for given operations, etc. operations.

   The development and introduction of Intent-Based Networking in
   operational environments will certainly create new security concerns.
   Such security concerns have to be anticipated at the design and
   specification time.  However, Intent-Based Networking may also be
   used as an enabler for better security.  For instance, security and
   privacy rules could be expressed in a more human-friendly and generic
   way and be less technology specific and less complex, leading to
   fewer low-level configuration mistakes.  The detection of threats or
   attacks could also be made more simple and comprehensive thanks to
   conflict detection at higher level or at coarser granularity.

   More thorough security analyses should be conducted as our
   understanding of Intent-Based Networking technology matures.

10.  Informative References

   [BOUTABA07]
              Boutaba, R. and I. Aib, "Policy-Based Management: A
              Historical Perspective", Journal of Network and Systems
              Management (JNSM), Vol. 15, Issue 4,
              DOI 10.1007/s10922-007-9083-8, November 2007,
              <https://doi.org/10.1007/s10922-007-9083-8>.

   [CLEMM20]  Clemm, A., Faten Zhani, M., and R. Boutaba, "Network
              Management 2030: Operations and Control of Network 2030
              Services", Journal of Network and Systems Management
              (JNSM), Vol. 28, Issue 4, DOI 10.1007/s10922-020-09517-0,
              October 2020,
              <https://doi.org/10.1007/s10922-020-09517-0>.

   [GHARBAOUI21]
              Gharbaoui, M., Martini, B., and P. Castoldi,
              "Implementation of an Intent Layer for SDN-enabled and
              QoS-Aware Network Slicing", 2021 IEEE 7th International
              Conference on Network Softwarization (NetSoft), pp. 17-23,
              DOI 10.1109/NetSoft51509.2021.9492643, June 2021,
              <https://doi.org/10.1109/NetSoft51509.2021.9492643>.

   [IEEE-TITS21]
              Garg, S., Guizani, M., Liang, Y-C., Granelli, F., Prasad,
              N., and R. R. V. Prasad, "Guest Editorial Special Issue on
              Intent-Based Networking for 5G-Envisioned Internet of
              Connected Vehicles", IEEE Transactions on Intelligent
              Transportation Systems, Vol. 22, Issue 8, pp. 5009-5017,
              DOI 10.1109/TITS.2021.3101259, August 2021,
              <https://doi.org/10.1109/TITS.2021.3101259>.

   [IEEEXPLORE]
              IEEE, "IEEE Xplore", <https://ieeexplore.ieee.org/>.

   [LENROW15] Lenrow, D., "Intent As The Common Interface to Network
              Resources", Intent Based Network Summit 2015 ONF Boulder:
              IntentNBI, February 2015.

   [M3010]    ITU-T, "Principles for a telecommunications management
              network", ITU-T Recommendation M.3010, February 2000.

   [MDPI22]   Gharbaoui, M., Ed., "Special Issue "Intent-Based Software-
              Defined Networks"", Computers (MDPI), 2022.

   [NETWORK-SLICE]
              Farrel, A., Ed., Drake, J., Ed., Rokui, R., Homma, S.,
              Makhijani, K., Contreras, L. M., and J. Tantsura,
              "Framework for IETF Network Slices", Work in Progress,
              August 2022, <https://datatracker.ietf.org/doc/html/draft-
              ietf-teas-ietf-network-slices-14>.

   [PANG20]   Pang, L., Yang, C., Chen, D., Song, Y., and M. Guizan, "A
              Survey on Intent-Driven Networks", IEEE Access, Vol. 8,
              pp.22862-22873, DOI 10.1109/ACCESS.2020.2969208, January
              2020, <https://doi.org/10.1109/ACCESS.2020.2969208>.

   [RFC3411]  Harrington, D., Presuhn, R., and B. Wijnen, "An
              Architecture for Describing Simple Network Management
              Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
              DOI 10.17487/RFC3411, December 2002,
              <https://www.rfc-editor.org/info/rfc3411>.

   [RFC7575]  Behringer, M., Pritikin, M., Bjarnason, S., Clemm, A.,
              Carpenter, B., Jiang, S., and L. Ciavaglia, "Autonomic
              Networking: Definitions and Design Goals", RFC 7575,
              DOI 10.17487/RFC7575, June 2015,
              <https://www.rfc-editor.org/info/rfc7575>.

   [RFC7950]  Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
              RFC 7950, DOI 10.17487/RFC7950, August 2016,
              <https://www.rfc-editor.org/info/rfc7950>.

   [RFC8299]  Wu, Q., Ed., Litkowski, S., Tomotaki, L., and K. Ogaki,
              "YANG Data Model for L3VPN Service Delivery", RFC 8299,
              DOI 10.17487/RFC8299, January 2018,
              <https://www.rfc-editor.org/info/rfc8299>.

   [RFC8309]  Wu, Q., Liu, W., and A. Farrel, "Service Models
              Explained", RFC 8309, DOI 10.17487/RFC8309, January 2018,
              <https://www.rfc-editor.org/info/rfc8309>.

   [RFC8345]  Clemm, A., Medved, J., Varga, R., Bahadur, N.,
              Ananthakrishnan, H., and X. Liu, "A YANG Data Model for
              Network Topologies", RFC 8345, DOI 10.17487/RFC8345, March
              2018, <https://www.rfc-editor.org/info/rfc8345>.

   [RFC8994]  Eckert, T., Ed., Behringer, M., Ed., and S. Bjarnason, "An
              Autonomic Control Plane (ACP)", RFC 8994,
              DOI 10.17487/RFC8994, May 2021,
              <https://www.rfc-editor.org/info/rfc8994>.

   [SERVICE-MAPPING-YANG]
              Lee, Y., Ed., Dhody, Dhruv., Ed., Fioccola, G., Wu, Q.,
              Ed., Ceccarelli, D., and J. Tantsura, "Traffic Engineering
              (TE) and Service Mapping YANG Data Model", Work in
              Progress, Internet-Draft, draft-ietf-teas-te-service-
              mapping-yang-11, 11 July 2022,
              <https://datatracker.ietf.org/doc/html/draft-ietf-teas-te-
              service-mapping-yang-11>.

   [SLOMAN94] Sloman, M., "Policy Driven Management for Distributed
              Systems", Journal of Network and Systems Management
              (JNSM), Vol. 2, Issue 4, pp. 333-360, December 1994.

   [STRASSNER03]
              Strassner, J., "Policy-Based Network Management", August
              2003.

   [TR523]    Open Networking Foundation, "Intent NBI - Definition and
              Principles", ONF TR-523, October 2016.

   [WIN21]    Ciavaglia, L. and E. Renault, "1st International Workshop
              on Intent-Based Networking", IEEE International Conference
              on Network Softwarization, June 2021,
              <https://netsoft2021.ieee-netsoft.org/program/workshops/
              win-2021/>.

Acknowledgments

   We would like to thank the members of the IRTF Network Management
   Research Group (NMRG) for many valuable discussions and feedback.  In
   particular, we would like to acknowledge the feedback and support
   from Remi Badonnel, Walter Cerroni, Marinos Charalambides, Luis
   Contreras, Jerome Francois, Molka Gharbaoui, Olga Havel, Chen Li,
   William Liu, Barbara Martini, Stephen Mwanje, Jeferson Nobre, Haoyu
   Song, Peter Szilagyi, and Csaba Vulkan.  Of those, we would like to
   thank the following persons who went one step further and also
   provided reviews of the document: Remi Badonnel, Walter Cerroni,
   Jerome Francois, Molka Gharbaoui, Barbara Martini, Stephen Mwanje,
   Peter Szilagyi, and Csaba Vulkan.

Authors' Addresses

   Alexander Clemm
   Futurewei
   2330 Central Expressway
   Santa Clara, CA 95050
   United States of America
   Email: ludwig@clemm.org

   Laurent Ciavaglia
   Rakuten Mobile
   Nokia
   Route de Villejust
   91620 Nozay
   France
   Email: laurent.ciavaglia@rakuten.com laurent.ciavaglia@nokia.com

   Lisandro Zambenedetti Granville
   Federal University of Rio Grande do Sul (UFRGS)
   Av. Bento Gonçalves
   Porto Alegre-RS
   9500
   Brazil
   Email: granville@inf.ufrgs.br

   Jeff Tantsura
   Microsoft
   Email: jefftant.ietf@gmail.com