Network Working Group                                         J.G.

Internet Engineering Task Force (IETF)                          J. Gould
Internet-Draft                                                D.S.
Request for Comments: 9537                                      D. Smith
Intended status:
Category: Standards Track                                 VeriSign, Inc.
Expires: 30 May 2024                                         J.K.
ISSN: 2070-1721                                                J. Kolker
                                                             R.C.
                                                               R. Carney
                                                            GoDaddy Inc.
                                                        27 November 2023
                                                              March 2024

Redacted Fields in the Registration Data Access Protocol (RDAP) Response
                   draft-ietf-regext-rdap-redacted-16

Abstract

   This document describes an RDAP a Registration Data Access Protocol (RDAP)
   extension for specifying methods of redaction of RDAP responses and
   explicitly identifying redacted RDAP response fields, using JSONPath
   as the default expression language.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list  It represents the consensus of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid the IETF community.  It has
   received public review and has been approved for a maximum publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of six months RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be updated, replaced, or obsoleted by other documents obtained at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 30 May 2024.
   https://www.rfc-editor.org/info/rfc9537.

Copyright Notice

   Copyright (c) 2023 2024 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info)
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Revised BSD License text as described in Section 4.e of the
   Trust Legal Provisions and are provided without warranty as described
   in the Revised BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Conventions Used in This Document . . . . . . . . . . . . . .   3
   3.  Redaction Methods . . . . . . . . . . . . . . . . . . . . . .   4
     3.1.  Redaction by Removal Method . . . . . . . . . . . . . . .   4
     3.2.  Redaction by Empty Value Method . . . . . . . . . . . . .   5
     3.3.  Redaction by Partial Value Method . . . . . . . . . . . .   6
     3.4.  Redaction by Replacement Value Method . . . . . . . . . .   7
   4.  Redacted RDAP Response  . . . . . . . . . . . . . . . . . . .   9
     4.1.  RDAP Conformance  . . . . . . . . . . . . . . . . . . . .   9
     4.2.  "redacted" Member . . . . . . . . . . . . . . . . . . . .   9
   5.  JSONPath Considerations . . . . . . . . . . . . . . . . . . .  31
     5.1.  JSONPath Client Considerations  . . . . . . . . . . . . .  31
     5.2.  JSONPath Server Considerations  . . . . . . . . . . . . .  32
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  33
     6.1.  RDAP Extensions Registry  . . . . . . . . . . . . . . . .  33
     6.2.  RDAP JSON Values Registry . . . . . . . . . . . . . . . .  33
   7.  Implementation Status . . . . . . . . . . . . . . . . . . . .  34
     7.1.  IIT-CNR/Registro.it RDAP Server . . . . . . . . . . . . .  34
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .  35
   9.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  35
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . .  35
     10.1.  Informative
   8.  References . . . . . . . . . . . . . . . . .  35
     10.2.
     8.1.  Normative References . . . . . . . . . . . . . . . . . .  35
   Appendix A.  Change History . . . . . . . . . . . . . . . . . . .  36
     A.1.  Change from 00 to 01  . . . . . . . . . . . . . . . . . .  36
     A.2.  Change from 01 to 02  . . . . . . . . . . . . . . . . . .  37
     A.3.  Change from 02 to 03  . . . . . . . . . . . . . . . . . .  38
     A.4.  Change from 03 to 04  . . . . . . . . . . . . . . . . . .  38
     A.5.  Change from 04 to 05  . . . . . . . . . . . . . . . . . .  38
     A.6.  Change from 05 to 06  . . . . . . . . . . . . . . . . . .  38
     A.7.  Change from 06 to 07  . . . . . . . . . . . . . . . . . .  38
     A.8.  Change from 07 to 08  . . . . . . . . . . . . . . . . . .  39
     A.9.  Change from 08 to 09  . . . . . . . . . . . . . . . . . .  39
     A.10. Change from 09 to 10  . . . . . . . . . . . . . . . . . .  39
     A.11. Change from 10 to 11  . . . . . . . . . . . . . . . . . .  40
     A.12. Change from 11 to 12  . . . . . . . . . . . . . . . . . .  40
     A.13. Change from 12 to 13  . . . . . . . . . . . . . . . . . .  41
     A.14. Change from 13 to 14  . . . . . . . . . . . . . . . . . .  41
     A.15. Change from 14 to 15  . . . . . . . . . . . . . . . . . .  42
     A.16. Change from 15 to 16  . . . . . . . . . . . . . . . . . .  42
     8.2.  Informative References
   Acknowledgements
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  42

1.  Introduction

   This document describes an RDAP extension for specifying methods of
   redaction of RDAP responses and explicitly identifying redacted RDAP
   response fields, using JSONPath as the default expression language.
   A redacted RDAP field is one that has data removed or replaced in the
   RDAP response due to server policy, such as the lack of client
   privilege to receive the field.  This extension can be used to
   identify redacted RDAP fields in any RDAP object class, as defined in
   [RFC9083], or RDAP fields defined in RDAP extensions.  Because an
   RDAP response may exclude a field due to either the lack of data or
   based on
   the lack of RDAP client privileges, this extension is used to
   explicitly specify which RDAP fields are not included in the RDAP
   response due to redaction.  It thereby provides a capability for
   disambiguation between redaction and possible other possible reasons for data
   or field absence.

   In [RFC9082] [RFC9082], RDAP supports both lookup and search queries, where a
   lookup query responds with a single object and a search query
   responds with a list of objects.  This document applies to redaction
   of a single object of a lookup response and in each of the objects of
   a search response.

   JSONPath, as defined in [I-D.ietf-jsonpath-base], [RFC9535], is used as the default expression
   language to reference RDAP fields that have been redacted.  The
   redacted JSON fields will either be removed, have empty values, have partial
   values, or be replaced in the RDAP response.  JSON is defined by
   [RFC8259].

2.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   The JSON examples include extra line breaks and whitespace. empty space.  For
   instance, the JSONPath expressions are broken out into multiple lines
   when required for illustration.

   The JSONPath expressions in the examples are for illustration
   purposes with single-role entities entities, and the exact expressions to use be
   used by the server is out-of-scope. are out of scope.

3.  Redaction Methods

   Redaction in RDAP can be handled in multiple ways.  Redaction in RDAP
   can be handled in multiple ways.  The resulting
   redacted RDAP response MUST comply with the format defined in the
   RDAP RFCs with
   the RDAP RFCs, such as [RFC9083] and updates.  The use of placeholder
   text for the values of the RDAP fields, such as the placeholder text "XXXX", MUST NOT be
   used for redaction, since the placeholder text value may not match
   the format requirements of each of the RDAP
   fields and provides fields, which could
   provide an inconsistent and unreliable redaction signal.  This
   section covers the redaction methods that can be used with the
   redaction signaling defined in Section 4.2.

   RDAP responses, as defined in [RFC9083], include a mix of JSON
   objects and JSON arrays, where JSON arrays are heavily used for
   entity objects with jCard [RFC7095].  jCard [RFC7095] is a JSON representation
   of vCard [RFC6350] that inherits its dependency on arrays.  An
   example is the vCard [RFC6350] "ADR" property / [RFC6350], or the jCard
   [RFC7095] "adr"
   property that [RFC7095], which defines a sequence of address components.
   According to [RFC6350], when an "ADR" property component value is
   missing, the associated component separator MUST still be specified.
   jCard [RFC7095] extends the use of arrays with each individual vCard property
   being represented by an array of three fixed elements, followed by
   one or more additional elements.  The mix of JSON objects and JSON
   arrays impacts the methods used for redaction in RDAP.

   The redaction of RDAP fields fall into the four categories defined in
   the following sub-sections. subsections.

3.1.  Redaction by Removal Method

   The Redaction by Removal Method is when the RDAP field is removed
   from the RDAP response, which is the default method.  The Redaction
   by Removal Method can be done for all RDAP response fields other than except for
   response fields using the position in an array to signal the redacted
   field (e.g., the JSON arrays used with jCard [RFC7095]). jCard).  RDAP
   extensions extensions, such
   as the one described in "Using JSContact in Registration Data Access
   Protocol (RDAP) JSON Responses [I-D.ietf-regext-rdap-jscontact] Responses" [RDAP-JSCONTACT], do not have a
   dependency on the use of positional JSON arrays and are therefore
   suited for the Redaction by Removal Method.

   When an RDAP object is redacted by removal, all of the RDAP object's
   child fields are also removed.  Only the redacted RDAP object needs
   to be referenced in the list of redacted fields, as defined in
   Section 4.2.

   An example of redacting an RDAP object is removing the administrative
   contact from the RDAP response and including the following "redacted"
   member:

   "redacted": [
     {
       "name": {
         "description": "Administrative Contact"
       },
       "prePath": "$.entities[?(@.roles[0]=='administrative')]",
       "method": "removal"
     }
   ]

                 Figure 1: Redacted Administrative Contact

   The Redaction by Removal Method MUST NOT be used to remove an element
   of an array where the position of the element in the array determines
   semantic meaning.  For example, removal of an individual data field
   in jCard [RFC7095] will result in a non-conformant jCard [RFC7095] array definition.

3.2.  Redaction by Empty Value Method

   The Redaction by Empty Value Method is when a redacted field is not
   removed,
   removed but its value is set to an empty value, such as "" for a
   jCard [RFC7095] Text text ("text") property or null for a non-Text non-text property.  The
   empty jCard [RFC7095] values ("" or null) are referenced in the "redacted"
   member in place of the jCard [RFC7095] property name in a an array, such as
   referencing the "fn" jCard
   [RFC7095] property value at position 3 instead of
   referencing the "fn" jCard property name at position 0.  The
   Redaction by Empty Value Method MUST be used only when redacting JSON
   response fields that use the position in an array to signal the
   redacted field (e.g., jCard
   [RFC7095] arrays).  Optional jCard [RFC7095] properties MUST
   use the Redaction by Removal Method (Section 3.1) to redact the
   entire property.  The required jCard [RFC7095] "fn" property, defined in
   section
   Section 6.2.1 of vCard [RFC6350], MUST use the Redaction by Empty
   Value Method to redact the property value.  Removing the "fn"
   property would violate vCard [RFC6350] [RFC6350], and removing the property
   value would violate the fixed array positions defined in jCard
   [RFC7095].

   An example of the redacted "fn" jCard property using the Redaction by
   Empty Value Method: jCard.

   [
     "fn",
     {},
     "text",
     ""
   ]

       Figure 2: Redacted "fn" jCard property using Property Using the Redaction by
                             Empty Value Method

   An example of the "redacted" member for the redacted "fn" jCard
   property value, which is array position 3:

   "redacted": [
     {
       "name": {
         "description": "Registrant Name"
       },
       "postPath": "$.entities[?(@.roles[0]=='registrant')].
         vcardArray[1][?(@[0]=='fn')][3]",
       "pathLang": "jsonpath",
       "method": "emptyValue",
       "reason": {
         "description": "Server policy"
       }
     }
   ]

         Figure 3: Redacted Registrant Name using Using an Array Position

3.3.  Redaction by Partial Value Method

   The Redaction by Partial Value Method is when a redacted field is not
   removed,
   removed but its value has a portion of the data removed, such as for
   the "label" or "fn" jCard [RFC7095] properties.  The partial values are
   referenced in the "redacted" member in place of the property name in a
   an array, such as referencing the "fn" jCard [RFC7095] property value at
   position 3 instead of referencing the "fn" jCard property name at
   position 0.  The Redaction by Partial Value Method SHOULD be used
   only when redacting JSON response fields that use a formatted value,
   where a portion of the value is removed.

   An example of the "label" jCard property in Figure 15 Section 3.3.1.3 of
   [RFC7095] that redacts "123 Maple Ave\nSuite 901\n":

   ["adr",
     {
       "type":"home",
       "label":"Vancouver\nBC\n1239\n"
     },
     "text",
     [
       "", "", "", "", "", "", ""
     ]
   ]

                 Figure 4: Redacted "label" jCard property Property

   An example of the "redacted" member for the redacted "label" jCard
   property value, based on Figure 15 Section 3.3.1.3 of [RFC7095]:

   "redacted": [
     {
       "name": {
         "description": "Home Address Label"
       },
       "postPath": "$.vcardArray[1][?(@[0]=='adr')][1].label",
       "pathLang": "jsonpath",
       "method": "partialValue",
       "reason": {
         "description": "Server policy"
       }
     }
   ]

    Figure 5: Redacted Label using Using the Redaction by Partial Value Method

3.4.  Redaction by Replacement Value Method

   The Redaction by Replacement Value Method is when a redacted field is
   not removed, removed but its value is replaced with a different value, such as
   protecting the "email" jCard [RFC7095] property value with an anonymized email
   "text" value or the use of an alternative "uri" value to a web form.
   Replacing a property value is a form of redaction, since it protects
   the true property value for privacy reasons.

   An example of the redacted "email" jCard property using the Redaction
   by Replacement Value Method with an anonymized email:

   [
     "email",
     {},
     "text",
     "anonymized123@example.com"
   ]

      Figure 6: Redacted "email" jCard property using Property Using the Redaction by
             Replacement Value Method with an anonymized email

   An example of the "redacted" member for the redacted registrant
   "email" jCard property value with an anonymized "text" value. Anonymized Email

   "redacted": [
     {
       "name": {
         "description": "Registrant Email"
       },
       "postPath": "$.entities[?(@.roles[0]=='registrant')].
                  vcardArray[1][?(@[0]=='email')][3]",
       "pathLang": "jsonpath",
       "method": "replacementValue",
     }
   ]

         Figure 7: Redacted Email using Using a Replacement Value with an
                          anonymized
                          Anonymized "text" value

   An example of the redacted "email" jCard property using the Redaction
   by Replacement Value Method with a [RFC8605] "contact-uri" jCard
   property to a web form:

   [
     "contact-uri",
     {},
     "uri",
     "https://email.example.com/123"
   ]

      Figure 8: Redacted "email" jCard property using Property Using the Redaction by
     Replacement Value Method with a "contact-uri" jCard property to a
                                  web form

   An example of the "redacted" member for the redacted registrant
   "email" jCard property with a [RFC8605] "contact-uri" jCard property Property to a web form:
                                  Web Form

   "redacted": [
     {
       "name": {
         "description": "Registrant Email"
       },
       "prePath": "$.entities[?(@.roles[0]=='registrant')].
                  vcardArray[1][?(@[0]=='email')]",
       "replacementPath": "$.entities[?(@.roles[0]=='registrant')].
                  vcardArray[1][?(@[0]=='contact-uri')]",
       "pathLang": "jsonpath",
       "method": "replacementValue",
     }
   ]

         Figure 9: Redacted Email using Using a Replacement Value with a "contact-
                     uri"
                 "contact-uri" jCard property Property to a web form Web Form

4.  Redacted RDAP Response

4.1.  RDAP Conformance

   RDAP responses that contain values described in this document MUST
   indicate conformance with this specification by including an
   "rdapConformance" ([RFC9083]) [RFC9083] value of "redacted".  The "redacted"
   extension identifier is described in Section 6.1.

   Example "rdapConformance" member with the redacted extension:

   "rdapConformance": [
     "rdap_level_0",
     "redacted"
   ]

            Figure 10: "rdapConformance" with Redacted Extension

4.2.  "redacted" Member

   The "redacted" member MUST be added to the RDAP response when there
   is one or more redacted fields.  The "redacted" member is included as
   a member of the object instance in a lookup response, such as the
   object classes defined in [RFC9083], and as a member of the object
   instances in a search response.

   The server server, including a redacted signal signal, provides an unauthorized
   client additional information related to the existence of data and
   MAY exclude the redacted members for RDAP fields that are considered
   a privacy issue in providing a data existence signal.  The server MAY
   choose to publish a redaction policy describing how this extension is
   implemented for their constituency.  The contents of such a policy
   are outside the scope of this specification.

   The "redacted" member contains an array of objects with the following
   child members:

   "name":  REQUIRED logical name for the redacted field.  The logical
       name used for the redacted field is up to server policy.  The
       logical name is defined using an object with a "type" field
       denoting a registered redacted name (see Section 6.2) or a
       "description" field denoting an unregistered redacted name.  The
       registered redacted names and the chosen unregistered names can
       meet the needs of different RDAP services or industries.

   "prePath":  OPTIONAL JSON path expression referencing a redacted JSON
       field in the pre-redacted response. response, using the expression language
       defined by the "pathLang" member.  The "prePath" member MAY be
       set when the redacted field does not exist in the redacted
       response for the Redaction By by Removal Method (Section 3.1) and
       the Redaction by Replacement Value Method (Section 3.4).  The
       "prePath" member MUST NOT be set when the "postPath" member is
       set.

   "postPath":  OPTIONAL JSON path expression referencing a redacted
       JSON field in the redacted (post-redacted) response. response, using the
       expression language defined by the "pathLang" member.  The
       "postPath" member MUST be set when the redacted field does exist
       in the redacted response for the Redaction by Empty Value Method
       (Section 3.2), the Redaction by Partial Value Method
       (Section 3.3), and the Redaction by Replacement Value Method
       (Section 3.4).  The "postPath" member MUST NOT be set when the
       "prePath" member is set.

   "replacementPath":  OPTIONAL JSON path expression of the replacement
       field of the redacted field with the Redaction by Replacement
       Value Method (Section 3.4), using the expression language defined
       by the "pathLang" member.

   "pathLang":  OPTIONAL JSON path expression language used, with the
       default value of "jsonpath" for JSONPath
       ([I-D.ietf-jsonpath-base]). [RFC9535].  Other JSON
       path expression languages registered with the "redacted
       expression language" RDAP JSON
       Values Registry Type in the "RDAP JSON Values" registry MAY
       be used based on server policy.

   "method":  OPTIONAL redaction method used; used, with one of the following
       values:

       *  "removal" indicating the Redaction By by Removal Method
          (Section 3.1),

       *  "emptyValue" indicating the Redaction by Empty Value Method
          (Section 3.2), or

       *  "partialValue" indicating the Redaction by Partial Value
          Method (Section 3.3), or

       *  "replacementValue" indicating the Redaction by Replacement
          Value Method. Method (Section 3.4) 3.4).

       The default value is "removal" when not provided.

   "reason":  OPTIONAL human readable human-readable reason(s) for the redacted field
       in the language defined by the [RFC9083] "lang" [RFC9083] member.  The
       default language is "en" if the [RFC9083] "lang" [RFC9083] member is not
       specified.  The reason is defined using an object with an
       OPTIONAL "type" field denoting a registered redacted reason (see
       see
       Section 6.2) and an OPTIONAL "description" field denoting an
       unregistered redacted reason.  The "description" field MUST NOT
       be a client processing dependency.

   Example of the unredacted version of an RDAP lookup response:

       {
         "rdapConformance": [
           "rdap_level_0"
         ],
         "objectClassName": "domain",
         "handle": "ABC123",
         "ldhName": "example.com",
         "secureDNS": {
           "delegationSigned": false
         },
         "notices": [
           {
             "title": "Terms of Use",
             "description": [
               "Service subject to Terms of Use."
             ],
             "links": [
               {
                 "rel": "self",
                 "href": "https://www.example.com/terms-of-use",
                 "type": "text/html",
                 "value": "https://www.example.com/terms-of-use"
               }
             ]
           }
         ],
         "nameservers": [
           {
             "objectClassName": "nameserver",
             "ldhName": "ns1.example.com"
           },
           {
             "objectClassName": "nameserver",
             "ldhName": "ns2.example.com"
           }
         ],
         "entities": [
           {
             "objectClassName": "entity",
             "handle": "123",
             "roles": [
               "registrar"
             ],
             "publicIds": [
               {
                 "type": "IANA Registrar ID",
                 "identifier": "1"
               }
             ],
             "vcardArray": [
               "vcard",
               [
                 [
                   "version",
                   {},
                   "text",
                   "4.0"
                 ],
                 [
                   "fn",
                   {},
                   "text",
                   "Example Registrar Inc."
                 ],
                 [
                   "adr",
                   {},
                   "text",
                   [
                     "",
                     "Suite 100",
                     "123 Example Dr.",
                     "Dulles",
                     "VA",
                     "20166-6503",
                     "US"
                   ]
                 ],
                 [
                   "email",
                   {},
                   "text",
                   "contact@organization.example"
                 ],
                 [
                   "tel",
                   {
                     "type": "voice"
                   },
                   "uri",
                   "tel:+1.7035555555;ext=1234"
                 ],
                 [
                   "tel",
                   {
                     "type": "fax"
                   },
                   "uri",
                   "tel:+1.7035555556"
                 ]
               ]
             ],
             "entities": [
               {
                 "objectClassName": "entity",
                 "roles": [
                   "abuse"
                 ],
                 "vcardArray": [
                   "vcard",
                   [
                     [
                       "version",
                       {},
                       "text",
                       "4.0"
                     ],
                     [
                       "fn",
                       {},
                       "text",
                       "Abuse Contact"
                     ],
                     [
                       "email",
                       {},
                       "text",
                       "abuse@organization.example"
                     ],
                     [
                       "tel",
                       {
                         "type": "voice"
                       },
                       "uri",
                       "tel:+1.7035555555;ext=1234"
                     ]
                   ]
                 ]
               }
             ]
           },
           {
             "objectClassName": "entity",
             "handle": "XXXX",
             "roles": [
               "registrant"
             ],
             "vcardArray": [
               "vcard",
               [
                 [
                   "version",
                   {},
                   "text",
                   "4.0"
                 ],
                 [
                   "fn",
                   {},
                   "text",
                   "Registrant User"
                 ],
                 [
                   "org",
                   {},
                   "text",
                   "Example Inc."
                 ],
                 [
                   "adr",
                   {},
                   "text",
                   [
                     "",
                     "Suite 1235",
                     "4321 Rue Somewhere",
                     "Quebec",
                     "QC",
                     "G1V 2M2",
                     "Canada"
                   ]
                 ],
                 [
                   "email",
                   {},
                   "text",
                   "registrant.user@example.com"
                 ],
                 [
                   "tel",
                   {
                     "type": "voice"
                   },
                   "uri",
                   "tel:+1-555-555-1235;ext=123"
                 ],
                 [
                   "tel",
                   {
                     "type": "fax"
                   },
                   "uri",
                   "tel:+1-555-555-5321"
                 ]
               ]
             ]
           },
           {
             "objectClassName": "entity",
             "handle": "YYYY",
             "roles": [
               "technical"
             ],
             "vcardArray": [
               "vcard",
               [
                 [
                   "version",
                   {},
                   "text",
                   "4.0"
                 ],
                 [
                   "fn",
                   {},
                   "text",
                   "Technical User"
                 ],
                 [
                   "org",
                   {},
                   "text",
                   "Example Inc."
                 ],
                 [
                   "adr",
                   {},
                   "text",
                   [
                     "",
                     "Suite 1234",
                     "4321 Rue Somewhere",
                     "Quebec",
                     "QC",
                     "G1V 2M2",
                     "Canada"
                   ]
                 ],
                 [
                   "email",
                   {},
                   "text",
                   "technical.user@example.com"
                 ],
                 [
                   "tel",
                   {
                     "type": "voice"
                   },
                   "uri",
                   "tel:+1-555-555-1234;ext=321"
                 ],
                 [
                   "tel",
                   {
                     "type": "fax"
                   },
                   "uri",
                   "tel:+1-555-555-4321"
                 ]
               ]
             ]
           },
           {
             "objectClassName": "entity",
             "handle": "ZZZZ",
             "roles": [
               "administrative"
             ],
             "vcardArray": [
               "vcard",
               [
                 [
                   "version",
                   {},
                   "text",
                   "4.0"
                 ],
                 [
                   "fn",
                   {},
                   "text",
                   "Administrative User"
                 ],
                 [
                   "org",
                   {},
                   "text",
                   "Example Inc."
                 ],
                 [
                   "adr",
                   {},
                   "text",
                   [
                     "",
                     "Suite 1236",
                     "4321 Rue Somewhere",
                     "Quebec",
                     "QC",
                     "G1V 2M2",
                     "Canada"
                   ]
                 ],
                 [
                   "email",
                   {},
                   "text",
                   "administrative.user@example.com"
                 ],
                 [
                   "tel",
                   {
                     "type": "voice"
                   },
                   "uri",
                   "tel:+1-555-555-1236;ext=789"
                 ],
                 [
                   "tel",
                   {
                     "type": "fax"
                   },
                   "uri",
                   "tel:+1-555-555-6321"
                 ]
               ]
             ]
           },
           {
             "objectClassName": "entity",
             "handle": "WWWW",
             "roles": [
               "billing"
             ],
             "vcardArray": [
               "vcard",
               [
                 [
                   "version",
                   {},
                   "text",
                   "4.0"
                 ],
                 [
                   "fn",
                   {},
                   "text",
                   "Billing User"
                 ],
                 [
                   "email",
                   {},
                   "text",
                   "billing.user@example.com"
                 ]
               ]
             ]
           }
         ],
         "events": [
           {
             "eventAction": "registration",
             "eventDate": "1997-06-03T00:00:00Z"
           },
           {
             "eventAction": "last changed",
             "eventDate": "2020-05-28T01:35:00Z"
           },
           {
             "eventAction": "expiration",
             "eventDate": "2021-06-03T04:00:00Z"
           }
         ],
         "status": [
           "server delete prohibited",
           "server update prohibited",
           "server transfer prohibited",
           "client transfer prohibited"
         ]
       }

                 Figure 11: Unredacted RDAP Lookup Response

   Example of the redacted version of an RDAP lookup response:

       {
         "rdapConformance": [
           "rdap_level_0",
           "redacted"
         ],
         "objectClassName": "domain",
         "ldhName": "example.com",
         "secureDNS": {
           "delegationSigned": false
         },
         "notices": [
           {
             "title": "Terms of Use",
             "description": [
               "Service subject to Terms of Use."
             ],
             "links": [
               {
                 "rel": "self",
                 "href": "https://www.example.com/terms-of-use",
                 "type": "text/html",
                 "value": "https://www.example.com/terms-of-use"
               }
             ]
           }
         ],
         "nameservers": [
           {
             "objectClassName": "nameserver",
             "ldhName": "ns1.example.com"
           },
           {
             "objectClassName": "nameserver",
             "ldhName": "ns2.example.com"
           }
         ],
         "entities": [
           {
             "objectClassName": "entity",
             "handle": "123",
             "roles": [
               "registrar"
             ],
             "publicIds": [
               {
                 "type": "IANA Registrar ID",
                 "identifier": "1"
               }
             ],
             "vcardArray": [
               "vcard",
               [
                 [
                   "version",
                   {},
                   "text",
                   "4.0"
                 ],
                 [
                   "fn",
                   {},
                   "text",
                   "Example Registrar Inc."
                 ],
                 [
                   "adr",
                   {},
                   "text",
                   [
                     "",
                     "Suite 100",
                     "123 Example Dr.",
                     "Dulles",
                     "VA",
                     "20166-6503",
                     "US"
                   ]
                 ],
                 [
                   "email",
                   {},
                   "text",
                   "contact@organization.example"
                 ],
                 [
                   "tel",
                   {
                     "type": "voice"
                   },
                   "uri",
                   "tel:+1.7035555555"
                 ],
                 [
                   "tel",
                   {
                     "type": "fax"
                   },
                   "uri",
                   "tel:+1.7035555556"
                 ]
               ]
             ],
             "entities": [
               {
                 "objectClassName": "entity",
                 "roles": [
                   "abuse"
                 ],
                 "vcardArray": [
                   "vcard",
                   [
                     [
                       "version",
                       {},
                       "text",
                       "4.0"
                     ],
                     [
                       "fn",
                       {},
                       "text",
                       "Abuse Contact"
                     ],
                     [
                       "email",
                       {},
                       "text",
                       "abuse@organization.example"
                     ],
                     [
                       "tel",
                       {
                         "type": "voice"
                       },
                       "uri",
                       "tel:+1.7035555555"
                     ]
                   ]
                 ]
               }
             ]
           },
           {
             "objectClassName": "entity",
             "handle": "XXXX",
             "roles": [
               "registrant"
             ],
             "vcardArray": [
               "vcard",
               [
                 [
                   "version",
                   {},
                   "text",
                   "4.0"
                 ],
                 [
                   "fn",
                   {},
                   "text",
                   ""
                 ],
                 [
                   "adr",
                   {},
                   "text",
                   [
                     "",
                     "",
                     "",
                     "",
                     "QC",
                     "",
                     "Canada"
                   ]
                 ]
               ]
             ]
           },
           {
             "objectClassName": "entity",
             "handle": "YYYY",
             "roles": [
               "technical"
             ],
             "vcardArray": [
               "vcard",
               [
                 [
                   "version",
                   {},
                   "text",
                   "4.0"
                 ],
                 [
                   "fn",
                   {},
                   "text",
                   ""
                 ],
                 [
                   "org",
                   {},
                   "text",
                   "Example Inc."
                 ],
                 [
                   "adr",
                   {},
                   "text",
                   [
                     "",
                     "Suite 1234",
                     "4321 Rue Somewhere",
                     "Quebec",
                     "QC",
                     "G1V 2M2",
                     "Canada"
                   ]
                 ]
               ]
             ]
           }
         ],
         "events": [
           {
             "eventAction": "registration",
             "eventDate": "1997-06-03T00:00:00Z"
           },
           {
             "eventAction": "last changed",
             "eventDate": "2020-05-28T01:35:00Z"
           },
           {
             "eventAction": "expiration",
             "eventDate": "2021-06-03T04:00:00Z"
           }
         ],
         "status": [
           "server delete prohibited",
           "server update prohibited",
           "server transfer prohibited",
           "client transfer prohibited"
         ],
         "redacted": [
           {
             "name": {
               "description": "Registry Domain ID"
             },
             "prePath": "$.handle",
             "pathLang": "jsonpath",
             "method": "removal",
             "reason": {
               "description": "Server policy"
             }
           },
           {
             "name": {
               "description": "Registrant Name"
             },
             "postPath": "$.entities[?(@.roles[0]=='registrant')].
               vcardArray[1][?(@[0]=='fn')][3]",
             "pathLang": "jsonpath",
             "method": "emptyValue",
             "reason": {
               "description": "Server policy"
             }
           },
           {
             "name": {
               "description": "Registrant Organization"
             },
             "prePath": "$.entities[?(@.roles[0]=='registrant')].
               vcardArray[1][?(@[0]=='org')]",
             "pathLang": "jsonpath",
             "method": "removal",
             "reason": {
               "description": "Server policy"
             }
           },
           {
             "name": {
               "description": "Registrant Street"
             },
             "postPath": "$.entities[?(@.roles[0]=='registrant')].
               vcardArray[1][?(@[0]=='adr')][3][:3]",
             "pathLang": "jsonpath",
             "method": "emptyValue",
             "reason": {
               "description": "Server policy"
             }
           },
           {
             "name": {
               "description": "Registrant City"
             },
             "postPath": "$.entities[?(@.roles[0]=='registrant')].
               vcardArray[1][?(@[0]=='adr')][3][3]",
             "pathLang": "jsonpath",
             "method": "emptyValue",
             "reason": {
               "description": "Server policy"
             }
           },
           {
             "name": {
               "description": "Registrant Postal Code"
             },
             "postPath": "$.entities[?(@.roles[0]=='registrant')].
               vcardArray[1][?(@[0]=='adr')][3][5]",
             "pathLang": "jsonpath",
             "method": "emptyValue",
             "reason": {
               "description": "Server policy"
             }
           },
           {
             "name": {
               "description": "Registrant Email"
             },
             "prePath": "$.entities[?(@.roles[0]=='registrant')].
               vcardArray[1][?(@[0]=='email')]",
             "method": "removal",
             "reason": {
               "description": "Server policy"
             }
           },
           {
             "name": {
               "description": "Registrant Phone"
             },
             "prePath": "$.entities[?(@.roles[0]=='registrant')].
               vcardArray[1][?(@[1].type=='voice')]",
             "method": "removal",
             "reason": {
               "description": "Server policy"
             }
           },
           {
             "name": {
               "description": "Technical Name"
             },
             "postPath": "$.entities[?(@.roles[0]=='technical')].
               vcardArray[1][?(@[0]=='fn')][3]",
             "method": "emptyValue",
             "reason": {
               "description": "Server policy"
             }
           },
           {
             "name": {
               "description": "Technical Email"
             },
             "prePath": "$.entities[?(@.roles[0]=='technical')].
               vcardArray[1][?(@[0]=='email')]",
             "method": "removal",
             "reason": {
               "description": "Server policy"
             }
           },
           {
             "name": {
               "description": "Technical Phone"
             },
             "prePath": "$.entities[?(@.roles[0]=='technical')].
               vcardArray[1][?(@[1].type=='voice')]",
             "method": "removal",
             "reason": {
               "description": "Server policy"
             }
           },
           {
             "name": {
               "description": "Technical Fax"
             },
             "prePath": "$.entities[?(@.roles[0]=='technical')].
               vcardArray[1][?(@[1].type=='fax')]",
             "reason": {
               "description": "Client request"
             }
           },
           {
             "name": {
               "description": "Administrative Contact"
             },
             "prePath": "$.entities[?(@.roles[0]=='administrative')]",
             "method": "removal",
             "reason": {
               "description": "Refer to the technical contact"
             }
           },
           {
             "name": {
               "description": "Billing Contact"
             },
             "prePath": "$.entities[?(@.roles[0]=='billing')]",
             "method": "removal",
             "reason": {
               "description": "Refer to the registrant contact"
             }
           }
         ]
       }

                  Figure 12: Redacted RDAP Lookup Response

   Example of the unredacted version of an RDAP search response:

     {
       "rdapConformance": [
         "rdap_level_0"
       ],
       "domainSearchResults":[
         {
           "objectClassName": "domain",
           "handle": "ABC121",
           "ldhName": "example1.com",
           "links":[
             {
               "value":"https://example.com/rdap/domain/example1.com",
               "rel":"self",
               "href":"https://example.com/rdap/domain/example1.com",
               "type":"application/rdap+json"
             },
             {
               "value":"https://example.com/rdap/domain/example1.com",
               "rel":"related",
               "href":"https://example.com/rdap/domain/example1.com",
               "type":"application/rdap+json"
             }
           ]
         },
         {
           "objectClassName": "domain",
           "handle": "ABC122",
           "ldhName": "example2.com",
           "links":[
             {
               "value":"https://example.com/rdap/domain/example2.com",
               "rel":"self",
               "href":"https://example.com/rdap/domain/example2.com",
               "type":"application/rdap+json"
             },
             {
               "value":"https://example.com/rdap/domain/example2.com",
               "rel":"related",
               "href":"https://example.com/rdap/domain/example2.com",
               "type":"application/rdap+json"
             }
           ]
         }
       ]
     }

                 Figure 13: Unredacted RDAP Search Response

   Example of the redacted version of an RDAP search response:

     {
       "rdapConformance": [
         "rdap_level_0",
         "redacted"
       ],
       "domainSearchResults":[
         {
           "objectClassName": "domain",
           "ldhName": "example1.com",
           "links":[
             {
               "value":"https://example.com/rdap/domain/example1.com",
               "rel":"self",
               "href":"https://example.com/rdap/domain/example1.com",
               "type":"application/rdap+json"
             },
             {
               "value":"https://example.com/rdap/domain/example1.com",
               "rel":"related",
               "href":"https://example.com/rdap/domain/example1.com",
               "type":"application/rdap+json"
             }
           ],
           "redacted": [
             {
               "name": {
                 "type": "Registry Domain ID"
               },
               "prePath": "$.domainSearchResults[0].handle",
               "pathLang": "jsonpath",
               "method": "removal",
               "reason": {
                 "type": "Server policy"
               }
             }
           ]
         },
         {
           "objectClassName": "domain",
           "ldhName": "example2.com",
           "links":[
             {
               "value":"https://example.com/rdap/domain/example2.com",
               "rel":"self",
               "href":"https://example.com/rdap/domain/example2.com",
               "type":"application/rdap+json"
             },
             {
               "value":"https://example.com/rdap/domain/example2.com",
               "rel":"related",
               "href":"https://example.com/rdap/domain/example2.com",
               "type":"application/rdap+json"
             }
           ],
           "redacted": [
             {
               "name": {
                 "description": "Registry Domain ID"
               },
               "prePath": "$.domainSearchResults[1].handle",
               "pathLang": "jsonpath",
               "method": "removal",
               "reason": {
                 "description": "Server policy"
               }
             }
           ]
         }
       ]
     }

                  Figure 14: Redacted RDAP Search Response

5.  JSONPath Considerations

   JSONPath [I-D.ietf-jsonpath-base] [RFC9535] is the default JSON path expression language.
   This section includes JSONPath considerations for clients and
   servers.

5.1.  JSONPath Client Considerations

   This section covers considerations for clients that receive responses
   from servers using [I-D.ietf-jsonpath-base] JSONPath [RFC9535] to identify redacted RDAP
   fields with the "prePath" "prePath", "postPath", or "postPath" "replacementPath" member of
   redacted objects in the "redacted" member.  The list of JSONPath
   client considerations include:

   1.  When the server is using the Redaction By by Removal Method
       (Section 3.1) or the Redaction by Replacement Value Method
       (Section 3.4) with an alternative field value, the JSONPath
       expression of the "prePath" member will not resolve successfully
       with the redacted response.  The client can key off the "name"
       member for display logic related to the redaction.

5.2.  JSONPath Server Considerations

   This section covers considerations for servers using
   [I-D.ietf-jsonpath-base] JSONPath
   [RFC9535] to identify redacted RDAP fields with the
   "prePath" "prePath",
   "postPath", or "postPath" "replacementPath" member of redacted objects in the
   "redacted" member.  The list of JSONPath considerations include:

   1.  Use absolute paths with the '$' JSONPath element.  An example is
       "$.handle" for the "Registry Domain ID" in a lookup response or
       "$.domainSearchResults[0].handle" in a search response.

   2.  Validate a JSONPath expression with the non-redacted RDAP
       response when using the "prePath" member, where evaluating the
       expression results in returning the redacted field.

   3.  Reference the removed object field when redacting an entire
       object by the Redaction by Removal Method (Section 3.1), where
       all of the object's child fields are explicitly removed.  An
       example is "$.entities[?(@.roles[0]=='administrative')]" for the
       entire "Administrative Contact".

   4.  It is possible for there to be  Use multiple bases for the redaction of certain content.  For
       example, if server policy is such that all administrative-role
       entities are redacted and all technical-
       role technical-role entities are
       redacted, then an entity having both the administrative role and
       the technical role could be redacted for two different reasons.
       In this situation, a server is required to include at least one
       "redacted" entry, but it should consider including a separate
       "redacted" entry for each applicable basis for redaction, so as redaction to
       clearly document the server policies that are relevant to
       redaction in each instance.

   5.  Reference the removed field when using the Redaction by Removal
       Method (Section 3.1).  An example is "$.handle" for the "Registry
       Domain ID".

   6.  Reference index 0 of the jCard [RFC7095] property array, which is the jCard [RFC7095]
       "name" property, with a filter expression containing the name of
       the field, field when redacting a jCard
       [RFC7095] field using the Redaction by
       Removal Method (Section 3.1).  An example is "$.entities[?(@.roles[0]=='registra
       nt')].vcardArray[1][?(@[0]=='email')]" "$.entities[?(@.role
       s[0]=='registrant')].vcardArray[1][?(@[0]=='email')]" for the
       "Registrant Email".

   7.  Reference the jCard [RFC7095] field value or values redacted by array index
       3 and greater, greater when redacting a jCard [RFC7095] field using the Redaction by
       Empty Value Method (Section 3.2).  The jCard
       [RFC7095] property array index
       3 and greater contain the property values, where the property
       values set with an empty value are referenced directly in place
       of the jCard [RFC7095] property name.  Servers can then systematically
       redact the jCard [RFC7095] field value or values based on the JSONPath expressions
       expressions, and clients will directly know which jCard [RFC7095] property
       values have been redacted.  An example is "$.entities[?(@.roles[0]=='reg
       istrant')].vcardArray[1][?(@[0]=='fn')][3]" "$.entities[?(@.roles[0
       ]=='registrant')].vcardArray[1][?(@[0]=='fn')][3]" for the
       "Registrant Name" or "$.entities[?(@.roles[0]=='registrant')].vcardArray[1][?
       (@[0]=='adr')][3][5]" "$.entities[?(@.roles[0]=='registrant')].vca
       rdArray[1][?(@[0]=='adr')][3][5]" for the "Registrant Postal
       Code".

   8.  RDAP extensions should define any special JSONPath considerations
       required to identify redacted RDAP fields if these considerations
       are insufficient.

6.  IANA Considerations

6.1.  RDAP Extensions Registry

   IANA is requested to register has registered the following value in the RDAP
   Extensions Registry: "RDAP Extensions"
   registry:

   Extension identifier: Identifier:  redacted

   Registry operator: Operator:  Any
   Published specification:  This document.

   Specification:  RFC 9537

   Contact:  IESG  IETF <iesg@ietf.org>

   Intended usage: Usage:  This extension identifies the redacted fields in an
      RDAP response.

6.2.  RDAP JSON Values Registry

   Section 10.2 of [RFC9083] defines the RDAP "RDAP JSON Values Registry Values" registry
   with
   pre-defined predefined Type field values and the use of the "Expert Review" a registration policy defined in of Expert
   Review [RFC8126].  This specification defines three new
   RDAP JSON Values Registry Type field
   values that can be used to register pre-defined predefined redacted name, reason,
   and expression language values.  IANA is instructed to update has updated the RDAP "RDAP JSON Values Registry
   Values" registry to accept these additional type Type field values as
   follows:

   "redacted name":  Redacted name being registered.  The registered
       redacted name is referenced using the "type" field of the
       redacted "name" field.

   "redacted reason":  Redacted reason being registered.  The registered
       redacted reason is referenced using the "type" field of the
       redacted "reason" field.

   "redacted expression language":  Redacted expression language being
       registered.  The registered redacted expression language is
       referenced using the "pathLang" field.

   The following values should be registered by the

   IANA in has also listed this document as a reference for the RDAP "RDAP JSON Values Registry described in [RFC9083]:
   Values" registry and has registered the following value:

   Value:  jsonpath

   Type:  redacted expression language

   Description:  JSON path expression language, as defined in draft-
       ietf-jsonpath-base.

   Registrant Name: RFC 9535.

   Registrant:  IETF

   Registrant

   Contact Information:  iesg@ietf.org

7.  Implementation Status

   Note to

   Reference:  RFC Editor: Please remove this section and the reference to
   RFC 7942 [RFC7942] before publication.

   This section records the status of known implementations of the
   protocol defined by this specification at the time of posting of this
   [RFC7942].  The description of implementations in this section is
   intended to assist the IETF in its decision processes in progressing
   drafts to RFCs.  Please note that the listing of any individual
   implementation here does not imply endorsement by the IETF.
   Furthermore, no effort has been spent to verify the information
   presented here that was supplied by IETF contributors.  This is not
   intended as, and must not be construed to be, a catalog of available
   implementations or their features.  Readers are advised to note that
   other implementations may exist.

   According to RFC 7942 [RFC7942], "this will allow reviewers and
   working groups to assign due consideration to documents that have the
   benefit of running code, which may serve as evidence of valuable
   experimentation and feedback that have made the implemented protocols
   more mature.  It is up to the individual working groups to use this
   information as they see fit".

7.1.  IIT-CNR/Registro.it RDAP Server

   Responsible Organization: Institute of Informatics and Telematics of
   National Research Council (IIT-CNR)/Registro.it

   Location: https://rdap.pubtest.nic.it/

   Description: This implementation includes support for RDAP queries
   using data from the public test environment of .it ccTLD.  The
   "redacted" array can be returned in the response to the domain lookup
   that is the only available to anonymous users.

   Level of Maturity: This is an "alpha" test implementation.

   Coverage: This implementation includes all of the features described
   in this specification.

   Contact Information: Mario Loffredo, mario.loffredo@iit.cnr.it

8. 9537

7.  Security Considerations

   The extension described in this document does not provide any
   security services beyond those described by [RFC9083].

9.

10.  References

10.1.  Informative

8.  References

   [I-D.ietf-regext-rdap-jscontact]
              Loffredo, M. and G. Brown, "Using JSContact in
              Registration Data Access Protocol (RDAP) JSON Responses",
              Work in Progress, Internet-Draft, draft-ietf-regext-rdap-
              jscontact-16, 6 June 2023,
              <https://datatracker.ietf.org/doc/html/draft-ietf-regext-
              rdap-jscontact-16>.

   [RFC8605]  Hollenbeck, S. and R. Carney, "vCard Format Extensions:
              ICANN Extensions for the Registration Data Access Protocol
              (RDAP)", RFC 8605, DOI 10.17487/RFC8605, May 2019,
              <https://www.rfc-editor.org/info/rfc8605>.

10.2.

8.1.  Normative References

   [I-D.ietf-jsonpath-base]
              Gössner, S., Normington, G., and C. Bormann, "JSONPath:
              Query expressions for JSON", Work in Progress, Internet-
              Draft, draft-ietf-jsonpath-base-21, 24 September 2023,
              <https://datatracker.ietf.org/doc/html/draft-ietf-
              jsonpath-base-21>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC6350]  Perreault, S., "vCard Format Specification", RFC 6350,
              DOI 10.17487/RFC6350, August 2011,
              <https://www.rfc-editor.org/info/rfc6350>.

   [RFC7095]  Kewisch, P., "jCard: The JSON Format for vCard", RFC 7095,
              DOI 10.17487/RFC7095, January 2014,
              <https://www.rfc-editor.org/info/rfc7095>.

   [RFC7942]  Sheffer, Y. and A. Farrel, "Improving Awareness of Running
              Code: The Implementation Status Section", BCP 205,
              RFC 7942, DOI 10.17487/RFC7942, July 2016,
              <https://www.rfc-editor.org/info/rfc7942>.

   [RFC8126]  Cotton, M., Leiba, B., and T. Narten, "Guidelines for
              Writing an IANA Considerations Section in RFCs", BCP 26,
              RFC 8126, DOI 10.17487/RFC8126, June 2017,
              <https://www.rfc-editor.org/info/rfc8126>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8259]  Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
              Interchange Format", STD 90, RFC 8259,
              DOI 10.17487/RFC8259, December 2017,
              <https://www.rfc-editor.org/info/rfc8259>.

   [RFC9082]  Hollenbeck, S. and A. Newton, "Registration Data Access
              Protocol (RDAP) Query Format", STD 95, RFC 9082,
              DOI 10.17487/RFC9082, June 2021,
              <https://www.rfc-editor.org/info/rfc9082>.

   [RFC9083]  Hollenbeck, S. and A. Newton, "JSON Responses for the
              Registration Data Access Protocol (RDAP)", STD 95,
              RFC 9083, DOI 10.17487/RFC9083, June 2021,
              <https://www.rfc-editor.org/info/rfc9083>.

Appendix A.  Change History

A.1.  Change from 00 to 01

   1.  Changed rdapConformance to use pointed "redacted_0.1" value to
       support structural changes of the extension up to the target of
       "redacted_1.0".
   2.  Updates based on the Gustavo Lozano feedback:
       1.  Updated the language to change the special treatment of jCard
           to be more generic for future RDAP extensions that leverage
           fixed length JSON arrays.

       2.  Added "RDAP extensions should define any special JSONPath
           considerations required to identify redacted RDAP fields if
           the these considerations are insufficient." to the JSONPath
           Considerations section to generalize it.
   3.  Updates based on the Marc Blanchet feedback:
       1.  Added a reference to draft-ietf-regext-rdap-jscontact as an
           example of an RDAP extension that is suited for the Redaction
           by Removal Method based on the lack of dependency on
           positional JSON arrays.
       2.  Added support for registered and unregistered (free-form)
           redaction reasons by changing the "reason" property to be a
           JSON object with the "type" and "description" properties.
           The "type" property includes registration in the IANA JSON
           Values Registry.
       3.  Added a "JSON Values Registry" section in the IANA
           Considersations section to define the "redaction reason" JSON
           Values Registry Type values to support the registration of
           redaction reasons.
   4.  Updates based on the Mario Loffredo feedback:
       1.  Added support for registered and unregistered (free-form)
           redaction names by changing the "reason" property to be a
           JSON object with the "type" and "description" properties.
           The "type" property includes registration in the IANA JSON
           Values Registry.
       2.  Added a "JSON Values Registry" section in the IANA
           Considersations section to define the "redaction name" JSON
           Values Registry Type values to support the registration of
           redaction names.
       3.  Added a JSONPath Considerations item associated with handling
           entities with multiple roles.
       4.  Added language to restrict the extension to responses.

A.2.  Change from 01 to 02

   1.  Updates to add support for RDAP search responses:
       1.  Replaced "RDAP lookup response" with "RDAP response"
           throughout the draft to expand the scope to include search.
       2.  Updated the description in the second paragraph of the
           Introduction to cover both a lookup response and a search
           response.
       3.  Added an example of the use of an absoluate path for a search
           response to the "JSONPath Considerations" section.
       4.  Added a description of the placement of the "redacted" member
           in a lookup response and a search response in the ""redacted"
           Member" section.
       5.  Added an example of an unredacted search response and a
           redacted search response in the ""redacted" Member" section.

A.3.  Change from 02 to 03

   1.  Fixed mismatch of the extension identifier, which was updated to
       "redacted_0.1" throughout the draft based on feedback from Mario
       Loffredo.
   2.  Added the JSONPath Considerations item associated with redacting
       fields for multiple entities with the same role based on
       implementation feedback from Mario Loffredo.
   3.  Added the Implementation Status section that includes the server
       implementation by Mario Loffredo.
   4.  Added use of numbered figures for easy reference for JSON Values
       Registry registrations.
   5.  Updated the example unredacted and redacted lookup responses to
       include the "objectClassName" and "handle" members.
   6.  Changed RFC7482 and RFC7483 references to RFC9082 and RFC9083,
       respectively.

A.4.  Change from 03 to 04

   1.  Changed the extension identifier to be "redacted" instead of a
       versioned value, which will be leveraged for both the
       rdapConformance value and the JSON Values.
   2.  Changed the RDAP Conformance to be "redacted_level_0.2", which
       leveraged the extension identifier as a prefix along with
       "_level_" and a pointed version number.  The version number will
       become "1.0" once the draft passes WGLC.
   3.  Added the Redaction by Replacement Value Method.

A.5.  Change from 04 to 05

   1.  Update the RDAP Extensions Registry entries to include the
       identifier that is used for the RDAP conformance value

   [RFC9535]  Gössner, S., Ed., Normington, G., Ed., and to
       include the "redacted" prefix indentifier to use C. Bormann,
              Ed., "JSONPath: Query Expressions for the JSON
       response member.
   2.  Changed the RDAP Conformance to be "redacted_level_0_3", which is
       registered in the RDAP Extensions Registry.  The RDAP Conformance
       value will become "redacted_level_1" once the draft passes WGLC.

A.6.  Change from 05 to 06

   1.  Fixed a couple nits.
   2.  Updated the Redaction by Replacement Value Method email web form
       examples to use the "contact-uri" jCard property of JSON", RFC 8605.

A.7.  Change from 06 to 07

   1.  Added the optional replacementPath child member for use with the
       Redaction by Replacement Value Method.

A.8.  Change from 07 to 08

   1.  Updates based on the Rick Wilhelm feedback:
       1.  Updated the definition of a redacted RDAP field in the
           Introduction section.
       2.  Updated the reference to three methods instead of two in the
           Redaction Methods section.
       3.  Created a new paragraph for the example in the Redaction by
           Removal Method section.
       4.  Explicitly specified one or more redacted fields for
           inclusion of the "redacted" member in the "redacted" Member
           section.
       5.  Updated the description of the "method" member in the
           "redacted" Member section.

A.9.  Change from 08 to 09

   1.  Updated the RDAP extensions Registry registration and RDAP
       conformance to match the working group consensus that does not
       include a version with "redacted".

A.10.  Change from 09 to 10

   1.  Updates based on the Pawel Kowalik feedback:
       1.  Changed "placeholder text value will not match the format
           requirements" to "placeholder text value may not match the
           format requirements" in Section 3.
       2.  Changed the "path" member OPTIONAL 9535,
              DOI 10.17487/RFC9535, February 2024,
              <https://www.rfc-editor.org/info/rfc9535>.

8.2.  Informative References

   [RDAP-JSCONTACT]
              Loffredo, M. and added "The "path"
           member MUST be set when the redacted field does exist G. Brown, "Using JSContact in the
           redacted response" to cover when it's required.
       3.  Added the definition of the "redacted expression language"
              Registration Data Access Protocol (RDAP) JSON Values Registry Type in the IANA Considerations and pre-
           registered the "jsonpath" "redacted expression language"
           value.
       4.  In the definition of the "path" member, added clarification
           whether the "path" member expression refers to the pre-
           redacted response field or the redacted response field based
           on the redaction method.
       5.  Replaced "The Redaction by Removal Method MUST NOT be used to
           remove a field using the position in a fixed length array to
           signal the redacted field" with "The Redaction by Removal
           Method MUST NOT be used to remove an element of an array
           where the position of the element in the array determines
           semantic meaning" Responses",
              Work in Section 3.1.
       6.  Added the "JSONPath Client Considerations" and "JSONPath
           Server Considerations" subsections to the "JSONPath
           Considerations" section.
   2.  Updates based on the Mario Loffredo feedback:

       1.  Revised Figure Progress, Internet-Draft, draft-ietf-regext-rdap-
              jscontact-17, 7 to reference the "email" property and the
           "contract-uri" property instead of the value elements of the
           properties.
       2.  Rephrased the sentence in section 4.2 to 'The "redacted"
           member contains an array of objects with the following child
           members'.
       3.  Added the Redaction by Partial Value Method for redaction of
           a portion of a formatted property, such as the jCard "fn" and
           "label" properties.

A.11.  Change from 10 to 11

   1.  Updated Abstract and first sentence of Introduction to "This
       document describes an RDAP extension for specifying methods of
       redaction of RDAP responses and explicitly identifying redacted
       RDAP response fields, using JSONPath as the default expression
       language.", based on feedback by Pawel Kowalik.
   2.  Changed "path" member to a "prePath" and "postPath" member to
       indicate whether the path expression applies to the pre-redacted
       or post-redacted response, based on feedback by Pawel Kowalik.

A.12.  Change from 11 to 12

   1.  Updates based on the Andy Newton feedback:
       1.  Added section "The resulting redacted RDAP response MUST
           comply with the RDAP RFCs, such as [RFC9083]" as second
           sentence of Section 3.
   2.  Updates based on the Tom Harrison feedback:
       1.  Added clarification in Section 2 "Conventions Used in This
           Document" that the JSONPath expressions in the examples are
           for illustration purposes with single-role entities and the
           exact expressions to use by the server are out-of-scope.
       2.  Replaced consideration #4 "When an entity has multiple
           roles..." in Section 5.2 "JSONPath Server Considerations"
           with the recommended language starting with "It is possible
           for there to be muliple bases for redaction..."
       3.  Revised the sentence "The client can first key off the "name"
           member for display logic and utilize a template RDAP response
           overlaid with the redacted response to successfully resolve
           the JSONPath expression." in Section 5.1 "JSONPath Client
           Considers" to "The client can key off the "name" member for
           display logic related to the redaction.".
       4.  Replaced "type" with "description" for the example redaction
           "name" and "reason" members, so not to infer that they are
           being registered for use.
       5.  Changed "Two new JSON Values Registry Type field values are
           used to register pre-defined redacted name and reason values"
           in Section 6.2 "JSON Values Registry" to "Three new JSON
           Values Registry Type field values are used to register pre-
           defined redacted name, reason, and expression language
           values".
   3.  Updates based on validating each of the draft examples:
       1.  Added missing comma between the "Administrative Contact" and
           "Billing Contact" "redacted" members.
       2.  Removed consideration #5 in Section 5.2 "JSONPath Server
           Considerations" since the use of the JSONPath expression
           "$.entities[?(@.roles[0]=='technical')][0]" is not valid and
           the exact JSONPath expression to use is out-of-scope.

A.13.  Change from 12 to 13

   1.  Updates based on the Jasdip Singh feedback:
       1.  In Section 1, replaced the sentence "The redacted JSON fields
           will either be removed or have empty values in the RDAP
           response" with "The redacted JSON fields will either be
           removed, have empty values, have partial values, or be
           replaced in the RDAP response.".
       2.  In Section 3, changed the reference of three categories to
           four categories.
       3.  In Section 3.1, changed ", which is the preferred method" to
           ", which is the default method" to clarify the Removal Method
           as the default redaction method.
       4.  In Section 4.2, updated the sentence to read "The "redacted"
           member is included as a member of the object instance in a
           lookup response, for the object classes defined in [RFC9083],
           and as a member of the array of object instances in a search
           response.".
       5.  In Section 4.2, explicitly defined the "name" member as
           REQUIRED".

A.14.  Change from 13 to 14

   1.  Replaced RFC 7483 reference with RFC 9083 based on the Document
       Shepherd review by Andy Newton.
   2.  Replaced the "Registrant Name" "IESG" value with "IETF" for the
       "RDAP JSON Values Registry" registrations.
   3.  Updates based on the Murray Kucherawy AD evaluation feedback:
       1.  Combined sentences on the use of placeholder text in
           Section 3 "Redaction Methods" for clarification.
       2.  Changed the two SHOULDs to MUSTs in Section 3.2 "Redaction by
           Empty Value Method".
       3.  Changed "alternate" to "alternative" in Section 3.4
           "Redaction by Replacement Value Method".
       4.  Changed "JSON expression" to "JSON path expression" in
           Section 4.2 "
       5.  Changed references of "JSON Values Registry" to "RDAP JSON
           Values Registry" to match the IANA registry name.

A.15.  Change from 14 to 15

   1.  Based on feedback from Paul Wouters, moved the Security
       Considerations language to Section 4.2 ""redacted" Member", since
       exclusion of a "redacted" child member due to privacy is a
       feature.  The Security Considerations section was made generic.
   2.  Revised the RDAP JSON Values Registry IANA Considerations used to
       register pre-register the pre-defined redacted name, redacted
       reason, and redacted expression language values based on Scott
       Hollenbeck's expert review feedback.

A.16.  Change from 15 to 16

   1.  Updates based on feedback from Roman Danyliw:
       1.  Updated "Redaction in RDAP can be handled in multiple ways.
           The resulting redacted RDAP response MUST comply with the
           RDAP RFCs, such as [RFC9083]" to "Redaction in RDAP can be
           handled in multiple ways.  The resulting redacted RDAP
           response MUST comply with the format defined in the RDAP RFCs
           with the RDAP RFCs, such as [RFC9083] and updates"
       2.  Add "The server MAY choose to publish a redaction policy
           describing how this extension is implemented for their
           constituency.  The contents of such a policy are outside the
           scope of this specification." to Section 4.2 ""redacted"
           Member". December 2023,
              <https://datatracker.ietf.org/doc/html/draft-ietf-regext-
              rdap-jscontact-17>.

Acknowledgements

   The authors wish to thank the following persons for their feedback
   and suggestions: Marc Blanchet, Tom Harrison, Scott Hollenbeck, Pawel
   Kowalik, Mario Loffredo, Gustavo Lozano, Andy Newton, Jasdip Singh,
   and Rick Wilhelm.

Authors' Addresses

   James Gould
   VeriSign, Inc.
   12061 Bluemont Way
   Reston, VA 20190
   United States of America
   Email: jgould@verisign.com
   URI:   http://www.verisigninc.com   http://www.verisign.com

   David Smith
   VeriSign, Inc.
   12061 Bluemont Way
   Reston, VA 20190
   United States of America
   Email: dsmith@verisign.com
   URI:   http://www.verisigninc.com   http://www.verisign.com

   Jody Kolker
   GoDaddy Inc.
   14455 N. Hayden Rd. Rd., #219
   Scottsdale, AZ 85260
   United States of America
   Email: jkolker@godaddy.com
   URI:   http://www.godaddy.com

   Roger Carney
   GoDaddy Inc.
   14455 N. Hayden Rd. Rd., #219
   Scottsdale, AZ 85260
   United States of America
   Email: rcarney@godaddy.com
   URI:   http://www.godaddy.com